Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 34 for “"Bone strain"”.
-
Experimental Validation of Finite Element Predicted Bone Strain in the Human Metatarsal
… location for stress fractures. Experimental strain measurements on 33 human cadaveric metatarsals subject to cantilever bending were compared with strain predictions from finite element (FE) models generated from computed tomography images. For the material property assignment of the FE …
-
Factors Affecting Patellar Mechanics and Bone Strain in Patients with Crouch Gait
… by evaluating stresses and underlying patellar bone strain during a gait cycle. The aims of this thesis work were (1) to analyze changes in PF mechanics and patellar bone strain between pre- and postoperative conditions; (2) to quantify the variability of predicted patellar strain due to …
-
The Effect of a High-Fat Diet on Bone Strain in Adult Rat Femurs
<p>A high-fat diet can adversely affect bone mechanical properties, but it is unknown how these changes affect bone adaptation. Bone adaptation occurs in response to strain-related mechanisms, and strain in the bone is affected by the size and mechanical properties of the bone.The purpose of this …
-
Bone strain change as a result of a long distance run modeled on a finite element tibia
… incidence rate of approximately 40%, in vivo bone stresses and strains do not approach levels of ultimate strength. Therefore, there must be outside factors such as muscle fatigue which lead to increased strain and injury risks. PURPOSE: Muscle fatigue during a long distance run may lead to …
-
Finite element analysis of a cementless proximal femoral stem in relation to early stem stability and interface bone strain
… assessing stems stability using only one femoral bone property was tested by varying the bone properties systematically and examining the resultant stem stability and interface strain. Unlike previous published studies which looked at the micromotion values only, the interface strains were also …
-
Tibial-fibular morphology: variation, sexual dimorphism, and mechanical implications
… with the mechanical fatigue of load-bearing bone. The tibia is the most frequently fractured site and females are at much greater risk than males. Bone geometry and density are hypothesized risk factors for stress fracture and are thought to contribute to the disparity in risk between sexes …
-
An Investigation into the Plate Fixation for Periprosthetic Femoral Fractures
… were developed to simulate the physiological bone strain and the plate stress under loads of common activities of daily living. The modeling results were shown to be able to effectively evaluate and compare the mechanics of different plating systems and construct lengths but were also able to …
-
Computational Biomechanical Modeling of the Human Knee During Kneeling
… natural and implanted knee joint kinematics and bone strain and (2) a platform to enable population-based evaluation by combining statistical model and joint function. Verification of a finite element model confirmed a strong agreement between model predicted and in-vitro kinematics of …
-
Variability of Strain and Strain Rate in the Human Tibial Diaphysis During Walking
… One area of research has focused on the role bone strain, which is known to be a factor in bone remodeling, has on stress fracture development. It has been difficult to perform studies in this area of research due to the invasiveness of in vivo measurements of the bone strain. Recently, a …
-
Repeated bout effect and musculoskeletal loading during prolonged downhill running
… bout compared to the first bout. Changes to bone strain at the lower-extremity over the course of the downhill run were then estimated using combined musculoskeletal-finite element modeling. We observed that the neuromuscular fatigue associated with prolonged downhill running did not impact …
-
The Strain Distribution in the Proximal Femur: A Method for Evaluation of New Femoral Component
… of the femoral component and resorption of the bone in the calcar region is a recognized problem following total hip arthroplasty ( THA) . It is suspected that various causes such as the heat of polymerization and monomer leakage from the bone cement, interruption of the blood supply to the …
-
Skeletal loading: implications for injury and treatment
… etiology of overuse injury and the promotion of bone health. Stress injury to bone is considered the ultimate overuse injury and accounts for the nearly one fourth of injuries in active populations. This dissertation evaluates bone loading in three ways: in vivo strain gage measurement, a …
-
Evaluation of the relationship between lacunar wall strain and osteocyte β-catenin signaling pathway activation using finite element methods and confocal fluorescence imaging.
Mechanical loading of bone has been shown to result in activation of Wnt/β-catenin signaling in osteocytes, leading to increased bone formation, but the mechanism of mechanotransduction is still unknown. It has been observed that following cyclic compression loading, osteocytes in murine cortical …
-
Design of a wireless platform for wearable and home automation applications
… The targeted bio-medical application is bone strain monitoring. The current setup to collect strain data is composed of a data acquisition unit connected to a bench top load instrument. For accurate measurements the lab animals have to be sedated and immobilized in the current setup which …
-
DEVELOPMENT OF A NEW AND NOVEL TOTAL HIP PROSTHESIS
… would reduce peak impact forces acting on the bone and joint by a mixture of finite element modelling and biomechanical cadaveric experimentation. The preliminary studies showed that our design concept does reduce bone strain and micromotion at the bone prosthesis interface, and centralized …
-
Effect of unicompartmental knee replacement tibial component design on proximal tibial strain and ongoing pain
… cause of which is elevated proximal tibial bone strain. The influence of implant design on this strain has not been previously investigated. Aims: The aims of this thesis are to determine the effect of medial UKR tibial component design on proximal tibial strain and ongoing pain. Methods: A …
-
Ligament Model Fidelity in Finite Element Analysis of the Human Lumbar Spine
… localized material properties of the SSL and pre-strain data for the ISL, SSL and ALL. These results have been incorporated both separately and compositely into the finite element model and each configuration has been simulated in spinal flexion, extension, axial rotation and lateral bending. …
-
Modelling & Experimental Investigations Of Distal Radius Surface Strain Distributions During Off-Axis Loading
Osteoporosis is a widespread bone disease where bones become less dense (low bone mass) and the internal structure of bone tissue breaks down, leading to weaker bones that are more prone to fracture. Distal radius fractures (Colles’ type fracture) are one of the most common types of fractures to …
-
Evaluation of transfixation cast constructs in horses
… The objectives of this study were to investigate strain at the bone-pin interface, the cast, and the fracture site, as well as load transfer between the bone and cast in different equine transfixation pin cast configurations. Three transfixation pin cast configurations (5 forelimbs per group) were …
-
The Influence of Ovariohysterectomy and Bisphosphonate Treatment on the Fatigue Behaviour of Whole-Bone and Bone Tissue
… due to their effectiveness at increasing bone density and strength; nonetheless, their long-term use has been associated with rare cases of atypical femoral fracture (AFF). The mechanistic link between bisphosphonates and AFFs is unclear, but it has been hypothesized that the potent …
Page 1 of 2