Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 54 for “"Bottom gate"”.
-
Bottom-Gate TFTs With Channel Layer Deposited by Pulsed PECVD
… on the film and these results are discussed. Bottom-gate TFTs were fabricated using a pulsed PECVD channel layer and an amorphous silicon nitride (a-SiN:H) gate dielectric. The extracted parameters of one of the best TFTs are <i>μ<sub>sat</sub></i> ≤ 0. 38 cm<sup>2</sup> V<sup>-1</sup> …
-
Flash Lamp Annealed LTPS TFTs with ITO Bottom-Gate Structures
… display products. Currently LPTS TFTs are top-gate structures due to manufacturing challenges associated with crystallizing thin film silicon when a thermally conductive gate is under portions and insulating glass under others. Bottom-gate devices offer the benefit of higher breakdown voltage, …
-
Fabrication and Analysis of Bottom Gate Nanocrystalline Silicon Thin Film Transistors
… this thesis focuses. In the material study, the gate quality silicon nitride (a-SiNx) films and doped nc-Si:H contacts based on conventional plasma enhanced chemical vapor deposition (PECVD) are investigated. The feasibility of a-SiNx on TFT application is discussed with current-voltage …
-
Engineering SiO2 Passivated Indium-Gallium-Zinc-Oxide TFTs for Improvement in Channel Control
… stability still remains a significant issue. In bottom-gate TFTs a difficult challenge is the lack of gate control on the back-channel region, resulting in distortion in ID - VGS characteristics. In this work a bottom-gate TFT process was established using SiO2 as a back-channel passivation …
-
Optimization and Characterization of Organic and Oxide Transistors
… material. The TFT was fabricated with bottom gate – bottom contact architecture on PEN foil. Implementation of SiO2 encapsulation improved TFT stability. The best performance was obtained for GIZO TFT sputter deposited at low oxygen content; with field effect mobility of 14.31 cm2/Vs, …
-
Chemical vapor sensing with novel coupled-channel field-effect transistors
… relies on a silicon substrate to function as a bottom gate and processing platform. The bilayer device geometry also uses a silicon substrate as a bottom gate and processing platform, but then relies on the interaction of an inorganic oxide semiconductor and organic semiconductor in a planar …
-
INTERFACE ENGINEERING OF 2D MATERIAL NANODEVICES
… in crested MoS2 based FETs with standard bottom-gate geometry. Apart from the 2D interface between substrate and material, TMDCs based heterostructures with 1D seamless interface synthesised by chemical vapour deposition (CVD) have also been investigated. Controllable localized conversion …
-
Development of New Building Blocks for Constructing Novel Polymer Semiconductors for Organic Thin Film Transistors
… to 8.2 ×10-3/1.0 ×10-2 cm2V-1s-1 was achieved in bottom-contact, bottom-gate organic thin film transistors. In addition, the broad absorption of the polymer over the UV-Vis range suggested that this polymer is suitable for applications in solar cells. The effect of conjugation on mobility and …
-
Optimization of Low-Temperature Solution-Processed Antimony Tin Oxide Thin-Film Field-Effect Transistor Fabrication Procedure for Neuromorphic Applications
… channel using the doped silicon substrate as a bottom gate, which show current enhancement without extinction, as altering the gate sweep voltage range results in a proportional translation or mirroring of the transfer function. Introducing measurement delays to the voltage sweeps have shown a …
-
Enhancing the Performance of Poly(3-Hexylthiophene) Based Organic Thin-Film Transistors Using an Interface Engineering Method
… structure of the transistors was based on the bottom gate bottom contact OTFT. The fabrication process was efficient, cost-effective, and relatively straightforward to implement. Current–voltage (I-V) measurements were performed to characterize the primary electronic properties of the …
-
The Influence of Alternative Electrode Configurations and Process Integration Schemes on IGZO TFT Operation
… variety of electrode configurations including top-gate, bottom-gate, double-gate, and either staggered or co-planar source/drain regions. TFTs were fabricated on glass and oxidized silicon substrates, consisting of sputter-deposited IGZO surrounded by SiO2 dielectric layers, an oxidizing ambient …
-
Morphological and Electrical Variance in Polysilicon Thin Film Transistors Crystallized by Flash Lamp Annealing
… Additionally, a new strategy for producing bottom-gate LTPS devices (a consistent challenge for laser-annealed LTPS) is presented by incorporating a transparent conductive oxide as a gate structure. The increased thermal mass provided by the bottom gate is harnessed to improve the impact of …
-
Graphene Quantum Capacitance Varactors
… varactors fabricated using a planarized local bottom gate electrode, HfO2 gate dielectric, is described. The devices show a capacitance tuning range of 1.6:1 at room-temperature, over a voltage range of ±2 V. A characterization methodology was developed to serves as a diagnostic process to …
-
Investigation of Thermal Stress Degradation in Indium-Gallium-Zinc-Oxide TFTs
… ensure desired performance of end-product. Both bottom-gate (BG) and double-gate (DG) TFTs were observed to degrade with hotplate treatments under 200◦C. Such events are rarely reported in the literature, and thus became the primary focus of this work. The mechanism causing the instability is not …
-
Ανάπτυξη τεχνολογίας κατασκευής τρανζίστορς λεπτών υμενίων βελτιστοποιημένων ως προς τη δομή των υμενίων πυριτίου που προκύπτει από την κρυσταλλοποίηση
… between critical process steps-namely gate dielectric deposition, doping and activation and the channel dimensions to be selected-and TFT electrical characteristics. We also studied the role of the topology (top gate, bottom gate, double gate) on TFT performance. Finally, we tried to …
-
Implant Activated Source/Drain Regions for Self-Aligned IGZO TFT
… regions typically require several microns of gate overlap in order to provide ohmic behavior with minimal series resistance and ensure tolerance to overlay error. In addition, further scaling the channel length by simply reducing the source/drain metal gap is not feasible. The focus of this …
-
Controlled Assembly And Electronic Transport Studies Of Solution Processed Carbon Nanotube Devices
… bending the SWNT at the edge of a local Al/Al2O3 bottom gate. The local gate tunes individual electrons one by one in the device and defines the size of the quantum dot though its width. By tuning both the back gate and local gate, it is possible to tune the transparency of tunnel barriers and the …
-
Analysis of fibrillar structures for the engineering of polymeric transistors
… data was collected from the fabrication of bottom gate, bottom contact thin film transistors, including over 100 Atomic Force Microscopy images of densely packed, semi-flexible P3HT nanofibers. Fibers were extracted from the images through a combination of anisotropic diffusion filtering, …
-
Investigation on Sputter Ambient Oxygen Partial Pressure and Anneal Conditions on the Operation of Indium-Tungsten-Oxide Thin-Film Transistors
… transistors (TFTs). The experiment investigates the impact of oxygen partial pressure during the film deposition, anneal temperature, time, and ambient conditions on TFT performance. Bottom-gate unpassivated TFTs were fabricated with a 30 nm IWO film on a 6” silicon wafer with 650 nm …
-
Molecular weight effects of PBT-6 polymeric semiconductor on charge carrier mobility
Organic π-conjugated Donor-Acceptor copolymers are emerging as potential candidate materials for organic field effect transistor (OFET) and organic photovoltaic (OPV) applications. The electron-deficient benzothiadiazole group coupled with an electron-rich oligothiophene to form donor-acceptor …
Page 1 of 3