Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 10 of 10 for “"Boundary Layer Measurement"”.

  1. Implementation of a Conrad Probe on a Boundary Layer Measurement System

    … implementation on an autonomous, compact boundary layer measurement device and its first application for subsonic in-flight measurements of a swept wing boundary layer. Calibration of the Conrad probe was accomplished using two calibration functions and a non-nulling method for resolving …

    calpoly Repository record for Implementation of a Conrad Probe on a Boundary Layer Measurement System (opens in a new tab)

  2. Unsteady Total Pressure Measurement for Laminar-to-Turbulent Transition Detection

    … presents the use of an unsteady total pressure measurement to detect laminar-to-turbulent transition. A miniature dynamic pressure transducer, Kulite model XCS-062-5D, was utilized to measure the total pressure fluctuations, and was integrated with an autonomous boundary layer measurement device …

    calpoly Repository record for Unsteady Total Pressure Measurement for Laminar-to-Turbulent Transition Detection (opens in a new tab)

  3. Boundary Layer Measurements Related to Wind Tunnel Testing of Riblets

    … models in a low speed wind tunnel and examine boundary layer behavior. In this project, boundary layer measurement techniques, such as rake measurements and Preston tube measurements on a flat plate mounted on the wind tunnel side wall are presented with calibration techniques using "Design of …

    odu Repository record for Boundary Layer Measurements Related to Wind Tunnel Testing of Riblets (opens in a new tab)

  4. Wall-pressure and PIV analysis for microbubble drag reduction investigation

    The effects of microbubbles injection in the boundary layer of a turbulent channel flow are investigated. Electrolysis demonstrated to be an effective method to produce microbubbles with an average diameter of 30 ??m and allowed the placement of microbubbles at desired locations within the boundary …

    tamu Repository record for Wall-pressure and PIV analysis for microbubble drag reduction investigation (opens in a new tab)

  5. Near-wall velocity measurements in two-dimensional turbulent boundary layers

    … velocity profiles in two-dimensional turbulent boundary layers when such data was plotted on law of the wall coordinates were reported by D. Coles in the Stanford Conference. These discrepancies can be especially important when near-wall velocity data is used to infer the local wall shear stress …

    vt Repository record for Near-wall velocity measurements in two-dimensional turbulent boundary layers (opens in a new tab)

  6. Measurements in the bimodal region of a wing-body junction flow with a rapidly-scanning two-velocity-component laser-Doppler velocimeter

    … 0020 tail joined at the maximum thickness (t). Measurements were performed with an approach flow conditions of U<sub>ref</sub> = 27.5 m/s, Re<sub>θ</sub> = 6700 at x/t=-2.15, and δ/t=0.5. A rapidly-scanning two-velocity-component laser-Doppler anemometer system was developed for use in …

    vt Repository record for Measurements in the bimodal region of a wing-body junction flow with a rapidly-scanning two-velocity-component laser-Doppler velocimeter (opens in a new tab)

  7. Evaluation of Design Tools for the Micro-Ram Air Turbine

    … developed to provide power for an autonomous boundary layer measurement system, has been undertaken. The design tools consist of a rotor model and a generator model. The primary focus was on developing and evaluating the generator model for the prediction of generator brake power and output …

    calpoly Repository record for Evaluation of Design Tools for the Micro-Ram Air Turbine (opens in a new tab)

  8. Microphone-Based Pressure Diagnostics for Boundary Layer Transition

    … low-cost microphones for unsteady total pressure measurement to detect transition from laminar to turbulent boundary layer flow has been conducted. Two small electret condenser microphones, the Knowles FG-23629 and the FG-23742, were used to measure the pressure fluctuations and considered for …

    calpoly Repository record for Microphone-Based Pressure Diagnostics for Boundary Layer Transition (opens in a new tab)

  9. Experimental verification of a heat/mass transfer analogy in two dimensional laminar and turbulent boundary layers.

    … equations are identical for identical flow and boundary conditions. Problems with engineering applications are transformed from one domain to another for practical and economical advantages. A mass transfer technique using naphthalene sublimation is faster, of higher resolution, economical and …

    umn Repository record for Experimental verification of a heat/mass transfer analogy in two dimensional laminar and turbulent boundary layers. (opens in a new tab)

  10. Skin Friction and Cross-flow Separation on an Ellipsoidal Body During Constant Yaw Turns and a Pitch-up Maneuver with Roll Oscillation

    The skin friction and cross-flow separation location on a non-body-of-revolution (non-BOR) ellipsoidal model performing constant-yaw turns and a pitch-up maneuver, each with roll oscillation were studied for the first time. The detailed, low uncertainty, flow topology data provide an extensive …

    vt Repository record for Skin Friction and Cross-flow Separation on an Ellipsoidal Body During Constant Yaw Turns and a Pitch-up Maneuver with Roll Oscillation (opens in a new tab)