Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Brazed joints"”.

  1. Failure Analysis of Brazed Joints Using the CZM Approach

    … of a structure. Structural reliability of a brazed assembly is strongly dependent on the joint mechanical properties. In the present work, mechanical reliability of low carbon steel brazed joints with copper filler metal is investigated and a methodology for failure analysis of brazed joints …

    waterloo Repository record for Failure Analysis of Brazed Joints Using the CZM Approach (opens in a new tab)

  2. A study of the residual stresses in dissimilar material brazed joints

    … the design or failure of dissimilar material brazed joints there must be an understanding of the metallurgy and mechanics of the joint. There must also be an understanding of how residual stresses develop due to the joining process. The work presented in this thesis aims to develop this …

    strathclyde Repository record for A study of the residual stresses in dissimilar material brazed joints (opens in a new tab)

  3. Development of MPEA filler for dissimilar joining of steel to titanium alloy and evaluation of strength of brazed joints

    … When subjected to the lap shear testing, spot joints created by brazing, resistance welding, or other techniques may fail by the plug failure mode (also called pull-out mode) or the interfacial shear failure mode. Conditions delineating these two modes are usually interpreted in literature and …

    colo-mines Repository record for Development of MPEA filler for dissimilar joining of steel to titanium alloy and evaluation of strength of brazed joints (opens in a new tab)

  4. The joining development, metallurgical study and characterisation approach of brazed joints between tungsten and fusion related materials for divertor applications

    The design of brazed joints between tungsten to other fusion related materials is a significant challenge in developing fusion reactors, largely due to the dissimilar physical metallurgy of the materials to be joined. Under extreme thermal loading and plasma irradiation conditions, selecting …

    strathclyde Repository record for The joining development, metallurgical study and characterisation approach of brazed joints between tungsten and fusion related materials for divertor applications (opens in a new tab)

  5. The formation of brittle phases in brazed zirconium joints

    … that would aid in the production of tougher brazed zirconium joints than are currently being obtained. The investigation was carried out in a number of stages: 1. A general literature survey of the metallurgy of brazed joints. 2. Zirconium brazed lap joints were made using either vacuum …

    london-metro Download PDF for The formation of brittle phases in brazed zirconium joints (opens in a new tab)

  6. FRACTURE AND FATIGUE OF STAINLESS STEEL WIDE GAP BRAZED WITH NICKEL BASED FILLER METALS

    … fatigue, of AISI 316 stainless steel wide gap brazed with different nickel based filler metals have been investigated. Tensile tests with extra small strain gauges bonded at the centre of the joints were carried out. Fatigue crack initiation lives and propagation rates were evaluated under …

    nus Repository record for FRACTURE AND FATIGUE OF STAINLESS STEEL WIDE GAP BRAZED WITH NICKEL BASED FILLER METALS (opens in a new tab) Download file for FRACTURE AND FATIGUE OF STAINLESS STEEL WIDE GAP BRAZED WITH NICKEL BASED FILLER METALS (opens in a new tab)

  7. THE STRENGTH OF BRAZED SINGLE-LAP JOINTS

    … or dissimilar materials, create high performance joints for use at high operating temperatures, and create thousands of joints simultaneously due to how the liquid brazing filler metal wets the base material and flows. The latter aspect enables the creation of high operating-temperature …

    cornell Repository record for THE STRENGTH OF BRAZED SINGLE-LAP JOINTS (opens in a new tab)

  8. MECHANICAL PROPERTIES OF NICKEL BASE WIDE GAP BRAZED JOINT

    … tensile properties of nickel base wide gap brazed joints have been investigated using IN625 as the base metal and Nicrobraz LC and Nicrogap 16 as the filler metal and gap filler, respectively. Three different gap widths were studied, i.e., 0.4, 0.8 and 1.2mm. The gaps were first prepacked …

    nus Repository record for MECHANICAL PROPERTIES OF NICKEL BASE WIDE GAP BRAZED JOINT (opens in a new tab) Download file for MECHANICAL PROPERTIES OF NICKEL BASE WIDE GAP BRAZED JOINT (opens in a new tab)

  9. High Entropy Materials as Brazing Filler Metals for Thermoelectric Devices

    … forms a metallurgical bond as it solidifies. Brazed joints are relatively high strength and are often electrically conductive. As materials applications evolve, ever more is demanded of filler metals and hence applications arise in which current filler metals cannot perform sufficiently. In …

    whiterose Download PDF for High Entropy Materials as Brazing Filler Metals for Thermoelectric Devices (opens in a new tab)

  10. Investigation of induction brazing on circular pipes: An detailed investigation of an induction brazing process

    … fulfilling quality requirements for induction brazed joints at a specific induction brazing station. The different quality defects were the presence of voids and other non-metallic inclusion inside the joints. The purpose of the project was to identify the main influencing parameters for the …

    chalmers Repository record for Investigation of induction brazing on circular pipes: An detailed investigation of an induction brazing process (opens in a new tab)

  11. Joining behaviour of crystalline and amorphous Zr-based alloy using Cu-based braze

    … of braze alloys and mechanical properties of brazed joints for pure zirconium plates and the Zr-based bulk metallic glass (BMG), Vitreloy 105 (Zr\(_5\)\(_2\)\(_.\)\(_5\)Cu\(_1\)\(_7\).\(_9\)Ni\(_1\)\(_4\)\(_.\)\(_6\)Al\(_1\)\(_0\)Ti\(_5\)). Active brazing alloy, Cusil ABA …

    birmingham Download PDF for Joining behaviour of crystalline and amorphous Zr-based alloy using Cu-based braze (opens in a new tab)

  12. Application of Cyclic Polarization of Aluminum 3003 Used in All-Aluminum Microchannel Heat Exchangers

    … refrigerant charge requirements, weight, reduced brazed joints, and decreased potential for leakage by increasing reliability. Al 3003 alloy is corrosion resistant and can be formed, welded, and brazed but the issue with all-aluminum heat exchangers is localized corrosion (pitting) in corrosive …

    unt Repository record for Application of Cyclic Polarization of Aluminum 3003 Used in All-Aluminum Microchannel Heat Exchangers (opens in a new tab)

  13. Micro Joining of Aluminum Graphite Composites

    … and shear test are performed to analyze the joints. Shear strengths of brazed joints are determined to be 20-21MPa which is comparable to the composite shear strength (46.5MPa in x-y plane and 19MPa in z plane). The fracture surface is found to be mostly on the composite rather than in brazed …

    tamu Repository record for Micro Joining of Aluminum Graphite Composites (opens in a new tab)

  14. Characterisation and modification of residual stress in brazed dissimilar material joints for a future fusion divertor

    … of tungsten based dissimilar material joints and the associated residual stresses. An improvement in the residual stress state at the interface is seen as a way to improve the performance of the divertor under cyclic loading. A method of beneficially modifying the residual stress state …

    strathclyde Repository record for Characterisation and modification of residual stress in brazed dissimilar material joints for a future fusion divertor (opens in a new tab)

  15. Estudo da molhabilidade do grafite via rotas de metalização com elementos ativos

    The production of dissimilar metal-ceramic joints has been a field of interest in developing aerospace technologies, with brazing being an important technique for joining these substrates. The brazing process is particularly challenging when joining carbon-based components, such as graphite, due to …

    brazil-ufrn Repository record for Estudo da molhabilidade do grafite via rotas de metalização com elementos ativos (opens in a new tab)

  16. Arc brazing of austenitic stainless steel to similar and dissimilar metals.

    … steel.Similar and dissimilar parent material arc brazed joints were manufactured using three copper based filler materials and three shielding gases. The joints were tested in terms of tensile strength, impact toughness and fatigue properties. It was found that similar parent material stainless …

    sheffield-hallam Download PDF for Arc brazing of austenitic stainless steel to similar and dissimilar metals. (opens in a new tab)

  17. Laser brazing of reaction-bonded silicon carbide with a silicon-aluminum-titanium filler alloy

    … of high contact angles. Cross-sectioning the brazed joints revealed good wetting between the filler metal and substrate. Significant diffusion of alloying elements also occurred during testing. Lap joint brazing followed the same preheat, pause, localized heating pattern as in wettability …

    colo-mines Repository record for Laser brazing of reaction-bonded silicon carbide with a silicon-aluminum-titanium filler alloy (opens in a new tab)

  18. Development of new high entropy alloys for brazing of Ni-base superalloys

    … and foil thickness on the shear strength of the brazed joint were evaluated. A maximum shear strength of 530 MPa was achieved with a brazing time of 90 min and a foil thickness of 300 µm. With a fixed brazing time of 90 min, the shear strength reduced continuously to a minimum value of 302 MPa …

    colo-mines Repository record for Development of new high entropy alloys for brazing of Ni-base superalloys (opens in a new tab)

  19. Brasagem a alta temperatura de aços inoxidáveis duplex com fitas amorfas à base de níquel

    … in the joint. The characterization of the brazed joints for the microstructural integrity of the steels, the presence of intermetallic phases in the melting zone and the base metal / metal addition interface was performed by optical microscopy, field emission scanning electron microscopy, …

    brazil-ufrn Repository record for Brasagem a alta temperatura de aços inoxidáveis duplex com fitas amorfas à base de níquel (opens in a new tab)

  20. Multiphase wide gap braze alloys for the repair of nickel-base superalloy turbine components: development and characterization

    … experiments. Bend testing was performed on brazed joints to determine their mechanical properties and maximum angular deflection. The metallurgical driving factors, such as solidification behavior and compositional effects, were analyzed to correlate the resulting microstructural …

    colo-mines Repository record for Multiphase wide gap braze alloys for the repair of nickel-base superalloy turbine components: development and characterization (opens in a new tab)

Page 1 of 2