Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"Brazing Sheet"”.
-
Warm Forming of Aluminum Brazing Sheet. Experiments and Numerical Simulations
… for increasing the formability of aluminum alloy sheet. Warm forming is a term that is generally used to describe a sheet metal forming process, where part or all of the blank is formed at an elevated temperature of less than one half of the material’s melting temperature. The focus of this work …
-
A Component-Level Study on the Effect of Warm Forming on Formability and Springback of Aluminum Alloy Brazing Sheet
… and springback behavior of AA3003/AA4045 brazing sheet (0.2 mm gauge) for three temper conditions: O-, H22- and H24-tempers. The geometry under study is referred as a surrogate heat-exchanger component (SHC) and contains complex features found on commercial automotive thermal management …
-
Investigation of effect of temperature and forming speed on the formability of AA3003 Brazing Sheets
… on the formability of AA3003 aluminum alloy brazing sheet in three temper conditions (O, H22 and H24) and two different thicknesses (0.2 and 0.5 mm). Limiting Dome Height (LDH) experiments were conducted from which Forming Limit Curves (FLCs) were developed using the “linear best fit …
-
Formability of Aluminum Alloy Sheet at Elevated Temperature
… warm formability of an AA3003 aluminum alloy brazing sheet is presented. Forming limit diagrams were determined using warm limiting dome height (LDH) experiments with in situ strain measurement based on digital image correlation (DIC) techniques. Forming limit curves (FLCs) were developed at …
-
CAPILLARY FLOW OF LIQUID ALUMINUM ALLOY IN WETTING AND WETTING/NON-WETTING SYSTEMS
… (Si, K, Cu, Ti, Fe, Mn) involved in an aluminum brazing sheet have been studied under different heating rates. It is demonstrated that Si diffuses more from the clad to the core of the substrate when heating rate decreases. Hence, less liquid metal would be available to form the joint at low …
-
Effect of Forming Temperature and Sheet Temper on the Brazing Characteristics of Aluminum Alloy Sheet
… heat exchangers are fabricated by forming and brazing of multi-layered aluminum (Al) alloy sheets. The Al brazing sheets are comprised of two alloy layers: an AA3xxx core, which provides strength to the assembly, and an AA4xxx clad, which melts during brazing to provide filler metal for joints …