Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 57 for “"Bridge abutment"”.

  1. Bridge abutment scour countermeasures

    … cable-tied blocks as scour countermeasures at bridge abutments is investigated. Riprap is the most common armouring scour protection method used at bridge abutments and approach embankments. Despite the widespread use of riprap protection, the guidelines for its use at bridge abutments are …

    auckland-ms Repository record for Bridge abutment scour countermeasures (opens in a new tab)

  2. Numerical analysis of a semi-integral bridge abutment undergoing cyclic lateral displacements

    Pontes de encontro integral (PEIs) e pontes de encontro semi-integral (PESIs) são sistemas estruturais construídos sem juntas de expansão térmica nos encontros. Dada essa característica, o encontro sofre movimentos combinados de translação e rotação devido à expansão e contração da superestrutura …

    brazil-ufrn Repository record for Numerical analysis of a semi-integral bridge abutment undergoing cyclic lateral displacements (opens in a new tab)

  3. Experimental and Analytical Investigation of Seismic Bridge-Abutment Interaction in a Curved Highway Bridge

    Seat-type bridge abutments are most commonly used to support the end spans of curved highway bridges. This type of abutment is often selected to eliminate unbalanced stresses in the superstructure under service loads, in particular thermal expansion and contraction. However, depending on the width …

    unr Repository record for Experimental and Analytical Investigation of Seismic Bridge-Abutment Interaction in a Curved Highway Bridge (opens in a new tab)

  4. Finite element analysis of footings in granular approach fills

    … by finite element techniques. A prototype bridge abutment founded on granular slope is also analysed by a finite element method; the obtained load-settlement behaviour, as well as the normal and shear stress distributions are compared with the actual measurements at the bridge abutment. The …

    carleton Repository record for Finite element analysis of footings in granular approach fills (opens in a new tab)

  5. Influence of Facing on the Construction and Structural Performance of GRS Bridge Abutments

    Geosynthetic Reinforced Soil-Integrated Bridge System (GRS-IBS) technology has been developed significantly over the last decade through extensive support and promotion by the Federal Highway Administration (FHWA). It is considered as a viable and cost-effective bridge construction alternative to …

    oklahoma-thes Repository record for Influence of Facing on the Construction and Structural Performance of GRS Bridge Abutments (opens in a new tab) Restricted access

  6. Influence of pounding and supporting soil on the seismic response of skewed bridges

    … in the past have revealed that skewed bridges are more vulnerable to damage than straight bridges. Due to the irregular geometry, they are prone to in-plane rotations of the girder that are not induced by the girders of straight bridges. Previous studies have found that these rotations …

    auckland-ms Repository record for Influence of pounding and supporting soil on the seismic response of skewed bridges (opens in a new tab)

  7. Aplicação do método dos elementos discretos no estudo da resposta cíclica de encontro de ponte semi-integral

    Integral and semi-integral bridges are alternatives for conventional bridges, which routinely present problems associated with expansion joints and bearings. However, the cyclic lateral displacements of the superstructure, induced by temperature variations, lead to a complex interaction between the …

    brazil-ufrn Repository record for Aplicação do método dos elementos discretos no estudo da resposta cíclica de encontro de ponte semi-integral (opens in a new tab)

  8. Influência do espaçamento vertical entre reforços nos deslocamentos de solo reforçado com geossintético para condições de muros portantes

    The Geosynthetic Reinforced Soil (GRS) bridge-supporting walls are structures in which the bridge abutment is supported directly by the reinforced fill, allowing the reinforced soil structure to function both as a retaining element and as a foundation one. The advantages of GRS bridge-supporting …

    brazil-ufrn Repository record for Influência do espaçamento vertical entre reforços nos deslocamentos de solo reforçado com geossintético para condições de muros portantes (opens in a new tab)

  9. Fifteen-year survival of root canal treated teeth in England and Wales

    … and those restored after RCT with a crown, bridge abutment and pin/screw. A previous history of RCT, post, crown and bridge abutment decreased the survival of the RCT teeth. Occlusal restorations also decreased the survival both before and after RCT. Conclusion The 15 years survival of root …

    birmingham Download PDF for Fifteen-year survival of root canal treated teeth in England and Wales (opens in a new tab)

  10. Effect of Inclined Loading on Passive Force-Deflection Curves and Skew Adjustment Factors

    Skewed bridges have exhibited poorer performance during lateral earthquake loading in comparison to non-skewed bridges (Apirakvorapinit et al. 2012; Elnashai et al. 2010). Results from numerical modeling by Shamsabadi et al. (2006), small-scale laboratory tests by Rollins and Jessee (2012), and …

    byu Repository record for Effect of Inclined Loading on Passive Force-Deflection Curves and Skew Adjustment Factors (opens in a new tab) Download PDF for Effect of Inclined Loading on Passive Force-Deflection Curves and Skew Adjustment Factors (opens in a new tab)

  11. Alternative Backfill Designs for Integral Abutment Bridge End Treatment

    The bump at the end of the bridge has long plagued motorists, designers, and maintenance personnel. The bump develops from the differential movements of the approach road and the bridge abutment. This movement produces discomfort to motorists, increased damage to vehicles, traffic hazards, and …

    sdstate Repository record for Alternative Backfill Designs for Integral Abutment Bridge End Treatment (opens in a new tab)

  12. Evaluation of Passive Force on Skewed Bridge Abutments with Controlled Low-Strength Material Backfill

    … aggregate backfill. The use of CLSM as a bridge abutment backfill material brings up the need to understand the passive force versus backwall displacement relationship for this application. To safely account for forces generated due to seismic activity and thermal expansion in bridge …

    byu Repository record for Evaluation of Passive Force on Skewed Bridge Abutments with Controlled Low-Strength Material Backfill (opens in a new tab) Download PDF for Evaluation of Passive Force on Skewed Bridge Abutments with Controlled Low-Strength Material Backfill (opens in a new tab)

  13. Performance observations of geosynthetic reinforced bridge abutments

    Geosynthetic Reinforced Soil - Integrated Bridge System (GRS-IBS) is a technology which has been around for almost 40 years in the United States but is now being pushed by the FHWA due to improved performance and promised cost savings in the construction of small bridges. GRS-IBS is a mechanically …

    missouri Repository record for Performance observations of geosynthetic reinforced bridge abutments (opens in a new tab)

  14. Numerical Study of Abutment Scour in Cohesive Soils

    … the maximum scour depth history around the bridge abutment. The basic objective is to establish the equation for predicting the maximum bed shear stress around the abutment at the initial condition of scouring. CHEN3D (Computerized Hydraulic ENgineering program for 3D flow) program is …

    tamu Repository record for Numerical Study of Abutment Scour in Cohesive Soils (opens in a new tab)

  15. Numerical simulation of flow in open-channels with hydraulic structures

    … of flooding scenarios resulting in significant bridge inundation and associated damages. During large floods, the presence of a bridge in an open channel triggers a highly turbulent flow field including 3D complex coherent structures around bridge structures. These turbulence structures are …

    gatech Repository record for Numerical simulation of flow in open-channels with hydraulic structures (opens in a new tab)

  16. I've Been Working on the Railroad: A Digital Reconstruction of the Southern Pacific Railroad

    … Pacific Railroad, specifically focusing on a bridge abutment along an abandoned section of track located near the town of Langtry, Texas. There have been archaeological investigations into the camp life of the different railroad labor groups, which were often made up of Chinese immigrant …

    texas-state Repository record for I've Been Working on the Railroad: A Digital Reconstruction of the Southern Pacific Railroad (opens in a new tab)

  17. Embankment foundation reinforcement using rammed aggregate piers in Iowa soils

    … were installed within and around the Ramp "C" abutment footprint for the I-35 overpass at the Hwy 5/I-35 interchange in Des Moines, IA. The rammed aggregate piers were installed in an effort to reduce total settlement and increase the rate of settlement in the soft alluvial clay. The primary …

    iastate Repository record for Embankment foundation reinforcement using rammed aggregate piers in Iowa soils (opens in a new tab)

  18. Permeability and lateral earth pressure in granular backfill against bridge abutments

    <p>In bridge abutment design, Wisconsin DOT assumes the granular backfill material used behind bridge abutments as free-draining and no hydrostatic pressures are applied on the wall. This research study was undertaken to investigate if backfill materials meet the assumption of a freely-drained …

    iastate Repository record for Permeability and lateral earth pressure in granular backfill against bridge abutments (opens in a new tab)

  19. AnEvaluation of LPILE in Comparison to the Measured Behavior of Prestressed Concrete Piles in Integral Abutments

    … (TDOT) has designed and built integral abutment bridges with prestressed concrete piles for many years. A product of constructing integral bridge abutments is that the piles supporting the structure are exposed to lateral deflections, which come mainly from thermal expansion and …

    ut-knoxville Repository record for AnEvaluation of LPILE in Comparison to the Measured Behavior of Prestressed Concrete Piles in Integral Abutments (opens in a new tab)

Page 1 of 3