Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 61 for “"Build orientation"”.

  1. Design for Additive Manufacturing Considering Optimization of Part Topology and Build Orientation

    … that are influenced by part topology and build orientation. Reducing support structures will limit manufacturing time and cost, allowing industry to further utilize the benefits of topology optimization. Previous works addressing approaches to limit supported surface area and support …

    queens Repository record for Design for Additive Manufacturing Considering Optimization of Part Topology and Build Orientation (opens in a new tab)

  2. Effect of build orientation of anisotropic behavior in direct energy deposition built components

    … simple process decisions, such as changing the build orientation, can result in a 25% variation in yield strength between the vertical and horizontal orientations. In this study, the effects of layer orientation on the mechanical properties of hybrid 316L stainless steel (SS) components …

    gatech Repository record for Effect of build orientation of anisotropic behavior in direct energy deposition built components (opens in a new tab)

  3. Simultaneous Topology and Build Orientation Optimization for Minimization of Additive Manufacturing Cost and Time

    … novel mathematical methodology for simultaneous build orientation and topology optimization, which considers additive manufacturing cost and time, and structural compliance. Various physical factors that influence additive manufacturing cost and time were researched, with component surface area …

    queens Repository record for Simultaneous Topology and Build Orientation Optimization for Minimization of Additive Manufacturing Cost and Time (opens in a new tab)

  4. Predicting Build Orientation of Additive Manufactured Parts with Mechanical Machining Features Using Deep Learning

    … of AM is to swiftly evaluate precise part build orientations. Current algorithms are either computationally expensive or provide multiple alternative orientations, requiring additional decision tradeoffs. To hasten the process of finding accurate part build orientation, a data-driven …

    buffalo Repository record for Predicting Build Orientation of Additive Manufactured Parts with Mechanical Machining Features Using Deep Learning (opens in a new tab)

  5. Residual Stress Constrained Topology and Build Orientation Optimization of Parts Fabricated by Metal Additive Manufacturing

    … are no published methods for gradient-based build orientation optimization for reducing residual stresses, and none which optimize the build orientation and topology simultaneously. This thesis presents a novel methodology for implementing residual stress constraints into topology and build …

    queens Repository record for Residual Stress Constrained Topology and Build Orientation Optimization of Parts Fabricated by Metal Additive Manufacturing (opens in a new tab)

  6. A Comprehensive Methodology for Cost Reduction in Additive Manufacturing Through Simultaneous Topology and Build Orientation Optimization

    … and do not effectively integrate structural and orientation design. This thesis develops a novel topology and build orientation optimization approach for additive manufacturing, capable of simultaneously considering structural performance and additive manufacturing cost. A comprehensive cost …

    queens Repository record for A Comprehensive Methodology for Cost Reduction in Additive Manufacturing Through Simultaneous Topology and Build Orientation Optimization (opens in a new tab)

  7. Multi-Objective Build Orientation and Topology Optimization for Cost and Time Minimization in Fiber Reinforced Additive Manufacturing

    … mechanical performance highly dependent on fiber orientation relative to applied loads. This directional behavior can be exploited through optimization of both component geometry, via topology optimization (TO), and build orientation, via build orientation optimization (BOO), to maximize …

    queens Repository record for Multi-Objective Build Orientation and Topology Optimization for Cost and Time Minimization in Fiber Reinforced Additive Manufacturing (opens in a new tab)

  8. Influence of build orientation on high temperature fatigue crack propagation mechanisms in Inconel 718 fabricated by laser powder bed fusion

    … and hence dependence of fatigue crack growth on build orientation, even after heat treatment. The AM specimens were manufactured in two orientations so that cracks would propagate either parallel (horizontal samples) or perpendicular (vertical samples) to the build direction. In addition, cast …

    soton Download PDF for Influence of build orientation on high temperature fatigue crack propagation mechanisms in Inconel 718 fabricated by laser powder bed fusion (opens in a new tab)

  9. Build orientation, part size geometry, and scan path influence on the microstructure and fatigue life of Ti-6Al-4V fabricated by Electron Beam Melting

    … electron microscopy, and optical microscopy.The orientation, scan path, and surface finish were varied and the effects on microstructure, tensile properties, and fatigue behavior are reported and discussed. As expected, the surface roughness left by the EBM fabrication adversely impacts the …

    ut-knoxville Repository record for Build orientation, part size geometry, and scan path influence on the microstructure and fatigue life of Ti-6Al-4V fabricated by Electron Beam Melting (opens in a new tab)

  10. A cost-driven process planning framework for selective laser melting

    … complex lightweight geometries in a single build, and offers an opportunity to improve product value through greater design freedom, part consolidation, reduced tooling and reduced supply chain complexity for a range of different industries. However, SLM also poses a number of materialand …

    soton Download PDF for A cost-driven process planning framework for selective laser melting (opens in a new tab)

  11. Characterization of Anisotropic Mechanical Performance of As-Built Additively Manufactured Metals

    … As such, there is a need to understand how the build orientation of as-built additively manufactured metals, affects mechanical performance (e.g. monotonic and cyclic behavior, cyclically hardening/softening behavior, plasticity effects on fatigue life etc.); and to use constitutive modeling to …

    ucf Repository record for Characterization of Anisotropic Mechanical Performance of As-Built Additively Manufactured Metals (opens in a new tab)

  12. Investigating the Effect of Build Direction on Mechanical Properties in Pellet-Based 3d Printing

    This study investigates the influence of build orientation on the mechanical performance of Polylactic Acid (PLA) components fabricated using Fused Granular Fabrication (FGF), a pellet-based additive manufacturing method, and benchmarks these results against Fused Deposition Modeling (FDM). …

    rit Repository record for Investigating the Effect of Build Direction on Mechanical Properties in Pellet-Based 3d Printing (opens in a new tab)

  13. Effects Of Position, Orientation, And Infiltrating Material On Three Dimensional Printing Models

    … for 3DP users by determining the effect of build position, build orientation and infiltration materials on the strength of prototypes. The study was performed in three different phases to limit the processing variables and to arrive at definite conclusions on relationship between materials …

    ucf Repository record for Effects Of Position, Orientation, And Infiltrating Material On Three Dimensional Printing Models (opens in a new tab)

  14. Study of Fracture Toughness and Notch Toughness under Impact loading of Electron Beam Melted Ti-6Al-4V alloy

    … alloy, with particular focus on the effects of build orientation, key mechanical properties and microstructural characteristics. Vertical compact tension specimens as well as Horizontal and vertical Charpy Impact specimens were fabricated using optimized processing parameters. Notch toughness …

    washington Repository record for Study of Fracture Toughness and Notch Toughness under Impact loading of Electron Beam Melted Ti-6Al-4V alloy (opens in a new tab)

  15. Crack propagation resistance in fracture and fatigue of laser powder bed fusion manufactured titanium alloys

    … and α+β) were selected to examine the roles of build orientation and post heat treatments on the fatigue crack growth (FCG) and fracture toughness properties. Tensile and fatigue crack growth behaviour of a LPBF manufactured Ti-6Al-4V (α+β) alloy was investigated in the as-built condition as …

    unsw Repository record for Crack propagation resistance in fracture and fatigue of laser powder bed fusion manufactured titanium alloys (opens in a new tab)

  16. J-Integral Method for Determining the Fracture Toughness of Ti-6Al-4V Produced by Electron Beam Melting

    … EBM-PBF Ti-6Al-4V investigate the influence of build orientation through comparison of horizontal (XY) and vertical (XZ) build orientation specimens on fracture toughness.

    washington Repository record for J-Integral Method for Determining the Fracture Toughness of Ti-6Al-4V Produced by Electron Beam Melting (opens in a new tab)

  17. Modeling and characterization of mechanical properties in laser powder bed fusion additive manufactured Inconel 718

    … samples were L-PBF printed in various orientations using Inconel 718 alloy. One plate each of compression and tensile samples was subjected to solution annealing and double aging heat treatment. Tensile, compressive and hardness properties were measured in as built and heat-treated …

    colo-mines Repository record for Modeling and characterization of mechanical properties in laser powder bed fusion additive manufactured Inconel 718 (opens in a new tab)

  18. Study of the microstructure and attendant mechanical response of additively manufactured IN625 thin-walled structures

    … designed and printed with varying geometry and build orientation. A novel milli-scale testing methodology was developed, which when coupled with digital image correlation allowed the ambient temperature location-specific mechanical response of T-elements to be measured with excellent …

    jhu Repository record for Study of the microstructure and attendant mechanical response of additively manufactured IN625 thin-walled structures (opens in a new tab)

  19. Machining characteristics of additively manufactured 17-4 PH stainless steel

    … through Selective Laser Melting (SLM) in two build orientations (horizontal and vertical), compared to its wrought counterpart. The study applies Oxley’s shear plane theory combined with the Johnson–Cook (J-C) constitutive model to estimate cutting (Fc) and thrust (Ft) forces under various …

    uoit Repository record for Machining characteristics of additively manufactured 17-4 PH stainless steel (opens in a new tab)

  20. Fracture Toughness and Fatigue Crack Propagation Testing and Evaluation of Additive Manufactured Titanium Alloy Metals at Different Orientations by Electron Beam Melting

    … These two experiments also studied the effects build orientation has on material properties by conducting the first two tests with specimens at four different orientations; 0°, 30°, 60°, and 90° relative to the XY build plane.

    washington Repository record for Fracture Toughness and Fatigue Crack Propagation Testing and Evaluation of Additive Manufactured Titanium Alloy Metals at Different Orientations by Electron Beam Melting (opens in a new tab)

Page 1 of 4