Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Build platform"”.

  1. How to feed and validate a phase-field model predicting the evolution of microstructures and properties in AlSi10Mg processed by Selective Laser Melting

    … a new layer or (ii) in the bulk by the effect of build platform temperature or (iii) during post-treatments. At low temper- ature, the Si in solid solution tends to precipitate out in the α-Al cells while at intermediate or high temperature, the pre-existing Si precipitates in the eutectic …

    liege Repository record for How to feed and validate a phase-field model predicting the evolution of microstructures and properties in AlSi10Mg processed by Selective Laser Melting (opens in a new tab) Restricted access

  2. Mechanical property variation in metal lattice struts

    … manufactured in three strut diameters and two build orientations. Testing different strut diameters investigates how defects change with feature size when all features are less than 1 mm in diameter. The two build orientations orient struts parallel to the build platform (horizontal) and …

    texas Repository record for Mechanical property variation in metal lattice struts (opens in a new tab)

  3. Development and Application of an Article-Based Evaluation of Focal Plane Error in Laser Powder Bed Fusion

    … lens, is nominally flat and coincident with the build plane, which is defined by the machine powder recoating system. The development and application of a low-cost, scalable, artifact-based method for measuring the focal plane deviation from the build plane over the working area for an LPBF …

    gatech Repository record for Development and Application of an Article-Based Evaluation of Focal Plane Error in Laser Powder Bed Fusion (opens in a new tab)

  4. Large scale fused deposition modeling : the effect of process parameters on bead geometry.

    … capable of outputting 13pph HDPE and an 18"x18" build platform, four parameters, specifically nozzle height, screw RPM, platform speed, and polymer type, were manipulated to study effects on different aspects of bead geometry to obtain an understanding of appropriate conditions for various …

    baylor Repository record for Large scale fused deposition modeling : the effect of process parameters on bead geometry. (opens in a new tab)

  5. Army aviation equipment useful life cost benefit analysis

    … Blackhawk and AH-64 Apache. The medium variant platforms comprise about 75 percent of the current Army fleet. Although its current fleet is over 30 years in age, to date, the Army is unsure if the fleet should be replaced based upon cost, material condition, and technological capability. The …

    nps Repository record for Army aviation equipment useful life cost benefit analysis (opens in a new tab)

  6. MAPPING, AWARENESS, AND VIRTUALIZATION NETWORK ADMINISTRATOR TRAINING TOOL AWARENESS MODULE

    … software that can be used as its intermediary build platform. We also describe a conceptual design for the MAVNATT Awareness Module, which queries, selects, and stores the nodal attributes in a relational database schema for tracking and management. The relational schema in this work was …

    nps Repository record for MAPPING, AWARENESS, AND VIRTUALIZATION NETWORK ADMINISTRATOR TRAINING TOOL AWARENESS MODULE (opens in a new tab)

  7. Mitigation of Machining-Induced Vibrations in Overhang Structures for Polymer Hybrid Manufacturing

    … accuracy while the part remains fixed to the build platform. However, when machining tall or compliant polymer features, the cutting process can induce large vibrations that degrade surface quality or cause sudden structural deflection, referred to in this work as kicking. This study …

    tamu Repository record for Mitigation of Machining-Induced Vibrations in Overhang Structures for Polymer Hybrid Manufacturing (opens in a new tab) Embargoed until 2028-05-01

  8. Mitigation of Machining-Induced Vibrations in Overhang Structures for Polymer Hybrid Manufacturing

    … accuracy while the part remains fixed to the build platform. However, when machining tall or compliant polymer features, the cutting process can induce large vibrations that degrade surface quality or cause sudden structural deflection, referred to in this work as kicking. This study …

    tamu Repository record for Mitigation of Machining-Induced Vibrations in Overhang Structures for Polymer Hybrid Manufacturing (opens in a new tab) Embargoed until 2028-05-01

  9. Mitigation of Machining-Induced Vibrations in Overhang Structures for Polymer Hybrid Manufacturing

    … accuracy while the part remains fixed to the build platform. However, when machining tall or compliant polymer features, the cutting process can induce large vibrations that degrade surface quality or cause sudden structural deflection, referred to in this work as kicking. This study …

    tamu Repository record for Mitigation of Machining-Induced Vibrations in Overhang Structures for Polymer Hybrid Manufacturing (opens in a new tab) Embargoed until 2028-05-01

  10. Re-inforcing nano-particle integration into metal AM and produced part characterisation

    … of on the printing location across the build platform in L-PBF, and identification of influencing factors and assessment of the optimal powder spreading conditions within the L-PBF system. Secondly a feedstock powder for L-PBF of MMCs, driven by the requirements of a homogeneous mixture …

    dcu Download PDF for Re-inforcing nano-particle integration into metal AM and produced part characterisation (opens in a new tab)

  11. Improving communication and collaboration in a DNP program through the use of technology: Enhancing student and faculty experience through technology-based clinical evaluations

    … submitting clinical evaluations on the UH Kuali Build platform. Methods: The UH Kuali Build evaluation forms were developed and piloted with eligible participants. A pre-questionnaire survey and a post-questionnaire survey were designed to evaluate the effectiveness and user-friendliness of the …

    hawaii Repository record for Improving communication and collaboration in a DNP program through the use of technology: Enhancing student and faculty experience through technology-based clinical evaluations (opens in a new tab)

  12. Effects Of Position, Orientation, And Infiltrating Material On Three Dimensional Printing Models

    … for 3DP users by determining the effect of build position, build orientation and infiltration materials on the strength of prototypes. The study was performed in three different phases to limit the processing variables and to arrive at definite conclusions on relationship between materials …

    ucf Repository record for Effects Of Position, Orientation, And Infiltrating Material On Three Dimensional Printing Models (opens in a new tab)

  13. Comparing Friction and Slot Dimensional Integrity of In-House 3D-Printed Orthodontic Brackets to Injection-Molded Alternatives

    … MA) with the slot perpendicular to the build platform and direction of layer deposition. Each bracket model was scaled up in size by a multiplier of 1.177 to account for material shrinkage. AI-generated support struts were created, and brackets were 3D-printed at a 50µm layer thickness …

    buffalo Repository record for Comparing Friction and Slot Dimensional Integrity of In-House 3D-Printed Orthodontic Brackets to Injection-Molded Alternatives (opens in a new tab)

  14. Optimization of support structures for laser powder bed fusion by Design for AM

    … creating geometry from a defined CAD model, building the component geometry layer upon layer. One of several Additive manufacturing methods is Laser Powder Bed Fusion. A recoater dispenses a thin layer of metal powder on top of a build platform, and thereafter, a laser energy source melts the …

    chalmers Repository record for Optimization of support structures for laser powder bed fusion by Design for AM (opens in a new tab)

  15. Developing a control system for improving selective polymer laser sintering build speed and part integrity

    … cost. Distribution of temperature across the build area surface can be optimised with a single control feedback loop to a level acceptable for the use of PA-12 (Polyamide 12) powder, though methods that are more complex may yield better results. Rapid deoxygenation of the build chamber at the …

    lancaster Download PDF for Developing a control system for improving selective polymer laser sintering build speed and part integrity (opens in a new tab)

  16. The Effect of Changing Particle Size Distribution and Layer Thickness on the Density of Parts Manufactured Using the Laser Powder Bed Fusion Process

    … (iii) the location of the fabricated part on the build platform. All these should help the prediction of the density/porosity of the parts and control their density for their desired applications. In previous studies, volumetric energy density (VED) or scan speed have been used as the control …

    whiterose Download PDF for The Effect of Changing Particle Size Distribution and Layer Thickness on the Density of Parts Manufactured Using the Laser Powder Bed Fusion Process (opens in a new tab)

  17. Continuous Nanoparticle Sizing and Characterization via Microfluidics

    … approach is readily implemented in an easy to build platform that can be employed either online to provide real-time feedback during continuous synthesis and processing, or offline for evaluation of test samples obtained from larger batches. Our implementation enables accurate results to be …

    tamu Repository record for Continuous Nanoparticle Sizing and Characterization via Microfluidics (opens in a new tab)

  18. Utilizing 3D Printing Technology In Well Stimulation Research

    … and cure a photopolymer onto a travelling build platform, building a physical model in a layer-by-layer fashion. Recent developments in this technology also allow SLA 3D printers to generate large-volume samples without sacrificing speed and resolution. For this study, two areas of well …

    tamu Repository record for Utilizing 3D Printing Technology In Well Stimulation Research (opens in a new tab)

Page 1 of 2