Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Building energy performance simulation"”.
-
MARTINI : smart meter driven estimation of HVAC schedules and energy savings based on WiFi sensing and clustering
HVAC systems account for a significant portion of building energy use. Nighttime setback scheduling is an energy conservation measure where cooling and heating setpoints are increased and decreased respectively during unoccupied periods with the goal of obtaining energy savings. However, knowledge …
-
Validation of a building simulation tool for predictive control in energy management systems
Buildings are responsible for a significant portion of energy consumption worldwide. Intelligent buildings have been devised as a potential solution, where energy consumption and building use are harmonised. At the heart of the intelligent building is the building energy management system (BEMS), …
-
A Comparative Analysis of Energy ModelingMethods for Commercial Buildings
This thesis researched the accuracy of measured energy data in comparison to estimated hand calculation data and estimated building energy performance simulation data. In the facility management industry, there is minimal evidence that building energy performance software is being used as a …
-
Characterizing and Structuring Urban Data for Housing Stock Energy Modeling
… to identify a workflow to focus on housing stock energy modeling by addressing the gap between the accessible urban datasets and the parameters required for building energy performance simulation. Urban building energy modeling (UBEM) supports policymaking for retrofitting buildings toward …
-
Analysis of Climate Change Impacts on the Performance of Net-Zero Energy Buildings
… influence of global climate change on Net-Zero Energy Buildings (NZEBs), focusing on educational facilities in hot and humid climates. The study critically examines how climate change might impact NZEB performance, the ongoing feasibility of NZEB projects, and the effects of using different …
-
A BIM-based workflow concurrently generating quantitative and qualitative output — a focus on energy performance and architectural representation
The integration of quantitative building energy performance simulation with qualitative architecture representational 3D data can facilitate performance-based decision making in the early phase of building design process. However, there are some problems that delay decision making until the late …
-
An innovative fault analysis framework to enhance building operations
… a failure analysis framework to enhance the building operations. A literature review was conducted for fault modeling and the fault mode and effect analysis (FMEA) applications to the building technology with a conclusion that few FMEA studies were applied in the building Heating, …
-
Analysis of Residential Building Energy Code Compliance for New and Existing Buildings based on Building Energy Simulation
Currently, the International Energy Conservation Code (IECC) is the most widely-used residential building energy code in the United States. Either the IECC or IECC with amendments has been adopted by 33 states. The latest version of the IECC contains three compliance requirements, including: …
-
Urban microclimate analysis and its effect on the buildings energy performance
… establishing a novel method to combine dynamic building energy performance simulation tools with microclimatic models, targeting to a higher accuracy of the buildings’ annual heating and cooling energy needs’ calculations. Typical hourly weather datasets, a required input for dynamic energy …
-
A Study of Occupancy-Based Smart Building Controls in Commercial Buildings
Occupant behavior has a significant influence on energy consumption in buildings because HVAC, lighting, equipment, and ventilation operations are often tied to occupancy-based controls. However, currently, the traditional methods for the prediction of occupant behavior using a building energy …
-
Calibration of a Building Energy Model Using Measured Data for a Research Center
… bottom-up methodology to calibrate a building energy model starting at the zone level, and finishing with the whole building level. The calibration is based as much as possible on measurements taken from the existing Building Automation System (BAS). This study presents the calibration …
-
Data-driven modeling and control of grid-interactive communities
… decarbonization of electric power generation and building-stock through a transition to renewable energy sources, electrified heating and transportation end-uses present new challenges that border on the electric power grid’s reliability. The intermittency of renewable energy sources coupled with …
-
Development of methodologies for automatic thermal model generation using building information models
… recent requirement for efficient allocation of energy resources in the buildingsector, the use of Building Energy Performance (BEP) simulations became moreand more frequent during the design as well as the operation phases. However, BEPsimulation models’ generation require significant effort for …
-
Heating, ventilation and air conditioning system optimization: a study of the effect of climate, building design, system selection and control strategy on the energy consumption of a typical office building in London and Athens
… demand for air conditioning in commercial buildings imposes a serious threat to Europe’s CO2 reduction targets. Architects and engineers are therefore in a key position to help reduce the impact of buildings on the environment by taking appropriate decisions concerning the design of the …