Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Building heights"”.
-
INVESTIGATING THE EFFECT OF HEIGHT VARIATIONS ON NATURAL VENTILATION IN HIGH-RISE RESIDENTIAL BUILDINGS IN SINGAPORE
Currently, high-rise residential buildings in Singapore, especially those built by the Housing and Development Board, do not consider natural ventilation an important aspect of design. Due to restrictions in site planning and budget, building blocks of same sizes are often arranged in a rigid …
-
THE COMPARISON OF TOTAL AND PHASED EVACUATION STRATEGIES FOR A HIGH-RISE OFFICE BUILDING
… phased evacuation strategies in high-rise office buildings and provide guidance on evacuation strategies for decision-makers in determining allowable occupant load. This work focuses on evaluating the principal factors (building height and occupant load) that may have an impact on egress time and …
-
Decarbonizing High-Rise Buildings in Cold Climates: Net-Zero Energy Strategies and the Role of Solar Energy
Despite growing emphasis on Net-Zero Energy Buildings (NZEBs), several gaps hinder their effective implementation. Ambiguity in NZEB definitions creates inconsistencies in reducing greenhouse gas emissions and limits practical applications. This thesis evaluates the influence of NZEB definition on …
-
SHEAR-WAVE VELOCITY MODEL OF NEAR-SURFACE SEDIMENTS, SITE RESPONSE, AND BUILDING DAMAGE: 1886 CHARLESTON, SOUTH CAROLINA EARTHQUAKE
… At the time of the 1886 Charleston earthquake building heights ranged from 2.4 m to 22.9 m. Assuming this range of building heights, the estimated range of fundamental building periods is 0.09 s to 0.51 s. Because overlap exists in the building and ground period ranges, a greater percentage of …
-
Comprehensive study of non-synoptic wind effects on buildings
… study examines wind loads on flat roof low-rise buildings under the effect of the simulated wind speed profile of the downburst phenomena. Examination of buildings is necessary since very few studies have examined non-synoptic winds. Indeed, non-synoptic winds have not been considered in the wind …
-
Planning for Power: The Role of Architecture & Urban Form in Local Energy Generation in Dense Built-Up Areas
This thesis explores how the urban form/building design, and a well-thought-out City Master Plan can significantly affect wind patterns and enhance on-site energy generation in dense urban areas. It will examine strategies such as modifying building heights, adjusting separations between …
-
The Effects of Pre-Movement on Large Building Evacuations
Evacuation times for buildings with a range of heights and occupant loads were generated by a computer simulation algorithm, assuming simultaneous start. Additional evacuation times were generated for the same buildings with pre-movement times assigned to building occupants. Pre-movement times were …
-
An evaluation of downwash under low windspeed conditions
… of this research effort was to examine the building effects on the ground level concentration field in the immediate vicinity of the Jersey City, New Jersey Total Energy (TE) Demonstration Plant by means of a full-scale field study. Trends exhibited by the collected data were evaluated in …
-
Calculation of target masking effects for air to surface ordnance delivery
… not resolved fine enough to distinguish tree and building heights. The ability to modify the data base to include object heights allows the PVG to show the target masking effects these objects have in a given region. The resulting synthetic environment can be used for strike planning and as a …
-
Vital communities criteria for urban neighborhood development
… physical tools of curb cuts, minimum and maximum building heights and densities, lot coverage, and setback requirements, and that these physical qualities of space can be codified.
-
The Effect of Land-Use Controls on Urban Sprawl
… and density restrictions in the form of minimum building heights, minimum square-footage limits, maximum building permits, and minimum persons per room. The importance of this dissertation lies in the fact that it presents the first empirical analysis of the effects of land-use controls on urban …
-
HOW URBAN DEVELOPMENT CONTRIBUTES TO THERMAL ENVIRONMENT VARIATION ---- A CASE STUDY IN NEW YORK CITY
… road density, impervious surface area percent, building shape coefficient, standard deviation of building height and street canyon aspect ratio. On both community district and census tract level, four of the five variables (road density, impervious surface area percent, standard deviation of …
-
Wind Loads on Solar Panel Systems Attached to Building Roofs
Solar panel systems placed either on building roofs or in the fields have become popular worldwide during the last decades since their contribution to environmental friendly energy production is remarkable. Their exposure to wind loads results to wind-induced loading which cannot be predicted …
-
Integrating 2D-3D urban morphological characteristics in predicting green roof cooling potential for mitigating diurnal surface urban heat island intensity
… daytime land surface temperature (DLST), building heights, volume and density, sky view factor, and solar radiation. Finally, by integrating eleven different neural network algorithms GR simulation, validation, and correlation between DLST and various urban features was investigated. Our …
-
CODE FOR CITY LIFE: INTENSIFICATION OF EMPTY GROUND IN HIGH-RISE MODERN CITIES
… numerous urban parameters such as existing building heights, nodal networks, field attractors, green-blue networks, street dimensions, plaza sizes and plot size exclusions. With the objective of activating the empty ground and intensifying the urban built-up area for hosting new life and …
-
Air to Air Channel Modeling for Advanced Air Mobility Services
… analyzed for different conditions like varying building heights of the city, changing building material, and also changing both building height and material at the same time. Two empirical models, the EL model and the CI model, have been presented along with simulations. Simulation results using …
-
Tornado-induced wind loads on a low-rise building
<p>The effects of wind loading on buildings due to straight line boundary layer type winds have been studied extensively in the past. Building code estimates are mainly based on these works. Little research has been, however, done to study the effect of tornado winds on built structures. This …
-
An analytical framework to estimate downtime and model the recovery of buildings after an earthquake
… and model the post-earthquake recovery of buildings. Downtime estimates include the time for mobilizing resources after an earthquake and conduct necessary repairs. The proposed framework advances the well-established FEMA P-58 and REDi methodologies by modeling temporal building recovery …
-
Seismic Fragility Analysis and Loss Estimation for Concrete Structures
… in this area are identified based on the building inventory data and reinforced concrete (RC) frame buildings and tilt-up concrete buildings are selected as case study buildings for further analysis. Using synthetic ground motion records, the structural behavior of the representative case …
-
Seismically Induced Column Buckling in Special Concentrically Braced Frames in Steel Buildings
… systems that are specifically detailed for steel buildings in regions with high seismic hazard. Current design standards for SCBFs intend to ensure inelastic deformation capacity through strict ductile and capacity-based design requirements. Braces are intended to yield in tension and buckle in …
Page 1 of 3