Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Building simulation software"”.

  1. Modeling atypical building use with commercially available building simulation software

    … be modeled directly with commercially available building simulation software, due to discrepancies between the modeling capabilities of the software and the reality of the armory. A building simulation software, eQUEST, was chosen for use in this project. Discrepancies between eQUEST inputs and …

    rowan Repository record for Modeling atypical building use with commercially available building simulation software (opens in a new tab)

  2. Empirical validations of the DOE-2.1E building simulation software for daylighting and economizer controls

    … and economizer facets of the DOE-2.1E building simulation software with an actual building. The test facility where these validations exercises were performed was the Iowa Energy Center's Energy Resource Station (ERS). Weather information measured at the site was used to build weather …

    iastate Repository record for Empirical validations of the DOE-2.1E building simulation software for daylighting and economizer controls (opens in a new tab)

  3. Influencing peak cooling power demand in the fossil free energy district project

    … occupants and controlling the cooling load of buildings. An optimal balance of thermal comfort and supply of cooling can then be determined, effectively reducing peak cooling demand, and thus, reducing both investment cost and environmental impact. To determine this balance, computer-modeling …

    chalmers Repository record for Influencing peak cooling power demand in the fossil free energy district project (opens in a new tab)

  4. SOFC modeling for the simulation of residential cogeneration systems

    … power module (FCPM) within the SOFC cogeneration simulation code developed under the umbrella of the International Energy Agencies Annex 42 project. The main objective of the improved model developed here is to increase generality and applicability, and to decrease reliance on empirical data. A …

    uvic Repository record for SOFC modeling for the simulation of residential cogeneration systems (opens in a new tab)

  5. Scaling urban energy use and greenhouse gas emissions through LiDAR

    … a new methodology to integrate LiDAR data, building simulation software and a building typology database to rapidly model energy and emissions for a large number of buildings. To adjust building energy demand to local urban-context, building morphology, and population density a scaling …

    ubc Repository record for Scaling urban energy use and greenhouse gas emissions through LiDAR (opens in a new tab) Download PDF for Scaling urban energy use and greenhouse gas emissions through LiDAR (opens in a new tab)

  6. Improving the Quality of Life for Older Adults in High-Rise Residential Buildings in Urban Honolulu through Responsive and Adaptive Design

    … features. Indoor comfort was assessed using building simulation software to determine the effectiveness of the proposed design methods. The overall healthiness of the building was evaluated using five elements derived from Blue Zone communities, as defined by Dan Beuttner, iv which were …

    hawaii Repository record for Improving the Quality of Life for Older Adults in High-Rise Residential Buildings in Urban Honolulu through Responsive and Adaptive Design (opens in a new tab)

  7. Building energy modelling and mapping using airborne LiDAR

    Globally, buildings are responsible for more than 40% of energy demand and contribute more than 30% of CO₂ emissions. Various strategies and policies have been developed to reduce the negative of effects of energy use in the building sector, specifically targeting energy conservation and energy …

    ubc Repository record for Building energy modelling and mapping using airborne LiDAR (opens in a new tab) Download PDF for Building energy modelling and mapping using airborne LiDAR (opens in a new tab)

  8. Integration of Combined Heat and Power Generators into Small Buildings - A Transient Analysis Approach

    … and greenhouse gas emissions of residential buildings. Recently, much attention has been given to these units. To date, the majority of studies in this field have concentrated on the steady operational performance of a specific generator type, and the available computer models have largely …

    waterloo Repository record for Integration of Combined Heat and Power Generators into Small Buildings - A Transient Analysis Approach (opens in a new tab)

  9. Evaluation and design of double-skin facades for office buildings in hot climates

    … thermal effect of double skin facades in office buildings in hot climates and (b) to propose guidelines for their efficient design based on this evaluation. The study involves the energy performance analysis of two buildings in India. A base case with the existing building skin was simulated for …

    tamu Repository record for Evaluation and design of double-skin facades for office buildings in hot climates (opens in a new tab)

  10. Energy Performance Gap of an Office Building: The influence of modelling assumptions and level of detail

    Building simulation software can be used to predict the energy use of buildings in the design phase. However, due to the importance of time efficiency in building projects today, energy models are often simplified. Numerous cases have been reported where the energy models are not performing in …

    chalmers Repository record for Energy Performance Gap of an Office Building: The influence of modelling assumptions and level of detail (opens in a new tab)

  11. General architecture for demand migration in the GIPSY demand-driven execution engine

    During the conceptual design stage of a building, the design team often has to make critical decisions with significant impact on energy performance and indoor comfort conditions. The design and selection of fenestration systems and their control plays a key role in determining building …

    concordia Download PDF for General architecture for demand migration in the GIPSY demand-driven execution engine (opens in a new tab)

  12. A methodology for integrated daylighting and thermal analysis of buildings

    During the conceptual design stage of a building, the design team often has to make critical decisions with significant impact on energy performance and indoor comfort conditions. The design and selection of fenestration systems and their control plays a key role in determining building …

    concordia Download PDF for A methodology for integrated daylighting and thermal analysis of buildings (opens in a new tab)

  13. Integrating residential heating and cooling flexibility into operational energy system optimization

    … increasing the need for flexible demand. Buildings could supply such flexibility by harnessing the inherent thermal inertia in their heating, cooling, ventilation, and domestic hot water systems. This thesis investigated integrating simplified lumped-capacitance building thermal models …

    aalto Repository record for Integrating residential heating and cooling flexibility into operational energy system optimization (opens in a new tab)

  14. Application of a Network Model for Complex Fenestration Systems

    … the necessity of reducing energy consumption. Buildings consume a large amount of energy, and have significant potential for energy savings. One tool for realising these potential savings is building simulation. To be able to use building simulation, accurate models for windows are needed. The …

    waterloo Repository record for Application of a Network Model for Complex Fenestration Systems (opens in a new tab)

  15. A nodal model for displacement ventilation in commercial buildings

    … hours. In addition, the thermal mass of building structures affects the room air temperature. This study presents a new dynamic displacement ventilation calculation model, the results of which are compared with the traditional method in a few typical applications. The study presents the …

    aalto Repository record for A nodal model for displacement ventilation in commercial buildings (opens in a new tab)

  16. Predicting Energy Savings Associated with Falling-Film Drain Water Heat Recovery Systems in Residential Buildings

    … travelling down shower drains in residential buildings. There are many commercially available DWHR heat exchangers on the market, and there exist a large variety of shower conditions that change from one house to another. For instance, the showerhead fixture and its associated flowrate, shower …

    waterloo Repository record for Predicting Energy Savings Associated with Falling-Film Drain Water Heat Recovery Systems in Residential Buildings (opens in a new tab)

  17. Implementation of Window Shading Models into Dynamic Whole-Building Simulation

    An important consideration in energy efficient building design is the management of solar gain, as it is the largest and most variable gain in a building. The design of buildings with highly glazed facades, as well as decreased energy transfer rates through better insulated and tighter envelopes …

    waterloo Repository record for Implementation of Window Shading Models into Dynamic Whole-Building Simulation (opens in a new tab)

  18. A systematic approach of integrated building control for optimization of energy and cost

    More efficient building energy management leads to lower energy consumption and cost, higher occupancy comfort and less detrimental effects on the environment. Improving building energy management with advanced integrated building control provides a tool to coordinate and optimize control of …

    concordia Download PDF for A systematic approach of integrated building control for optimization of energy and cost (opens in a new tab)