Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"Built-up edge"”.

  1. Experimental Study of Built-up-edge Formation in Micro Milling

    … and acceptable surface finish. The detrimental built-up-edges (BUEs) not only degrade the surface finish of machined features, but also pose a concern for critical applications when BUE can be eventually detached from machined surface. This work presents experimental study on conditions for BUE …

    tamu Repository record for Experimental Study of Built-up-edge Formation in Micro Milling (opens in a new tab)

  2. MACHINABILITY ENHANCEMENT OF STAINLESS STEELS THROUGH CONTROL OF BUILT-UP EDGE FORMATION

    … to adhere to the cutting tool surface, forming a built-up edge (BUE). The BUE is an extremely deformed piece of material which intermittently sticks to the tool at the tool-chip interface throughout the cutting test, affecting tool life and surface integrity. Unstable BUE can cause tool failure …

    mcmaster Repository record for MACHINABILITY ENHANCEMENT OF STAINLESS STEELS THROUGH CONTROL OF BUILT-UP EDGE FORMATION (opens in a new tab)

  3. Chip formation and metal cutting performance when using non-plane rake face tools

    … characterised by the existence of a special built-up-edge at values of undeformed chip thickness greater than a particular value. The variation in the configuration of this special built-up-edge with different land configurations is examined, it is thought for the first time. The stability of …

    city-london Download PDF for Chip formation and metal cutting performance when using non-plane rake face tools (opens in a new tab)

  4. Laser assisted micro milling with minimum quantity lubrication and vortex cooling

    … to wet cutting. However, LAMM resulted in built-up edge on the tool faces. An extended duration LAMM tool life test was conducted using the best cutting conditions identified in the factorial experiment. As the tool wore, the grooves developed a tapered and rounded cross section, and …

    gatech Repository record for Laser assisted micro milling with minimum quantity lubrication and vortex cooling (opens in a new tab)

  5. Microdrilling of Nitinol

    … lower cutting speeds. Additionally, control of built up edge formation proved critical in decreasing wear, reducing drill wandering and improving hole quality. Finite element analysis was used with the orthogonal cutting model to predict tool fracture as a function of cutting speed and chip …

    tamu Repository record for Microdrilling of Nitinol (opens in a new tab)

  6. Development of TiAlN PVD Coating Systems for Machining of Compacted Graphite Iron (CGI)

    … to stick to the cutting tool, which results in built-up edge formation and adhesion wear. This research attempts to address challenges associated with CGI turning by developing a TiAlN coating with a focus on thickness and low residual stress. The mentioned coating was developed using a new …

    mcmaster Repository record for Development of TiAlN PVD Coating Systems for Machining of Compacted Graphite Iron (CGI) (opens in a new tab)

  7. Microdrilling of Biocompatible Materials

    … Drill wear is more pronounced at outer cutting edge due to higher cutting speeds. However, when drilling 316L stainless steel attrition wear at chisel edge is dominant. Hole quality degradation due to formation of built up edge at the drill tip is observed. Coated drill improves tool life by …

    tamu Repository record for Microdrilling of Biocompatible Materials (opens in a new tab)

  8. Novel Cutting-Edge In-situ Deposition of Soft Metallic Solid Lubricant Coatings for Efficient Machining of High-Strength alloys

    … which reduces friction, sticking, seizure, and built-up edge formation, resulting in decreased tool wear and chipping. The newly developed pre-machined recoating method has yielded promising outcomes, reducing cutting force and significantly improving tool lifespan compared to the PVD benchmark …

    mcmaster Repository record for Novel Cutting-Edge In-situ Deposition of Soft Metallic Solid Lubricant Coatings for Efficient Machining of High-Strength alloys (opens in a new tab)

  9. Identification of Optimal Conditions for Dry Drilling (Analytical Approach to Prediction of the Occurrence of BUE)

    … of aluminum to counter the formation of a built-up-edge (BUE), among other reasons. The elimination of the use of lubricants in drilling of aluminum is important because of the associated high costs of cleaning and disassembly involved in lubrication. The optimal conditions sought in this …

    utahstate Repository record for Identification of Optimal Conditions for Dry Drilling (Analytical Approach to Prediction of the Occurrence of BUE) (opens in a new tab)

  10. Machinability of Duplex and Super Duplex Stainless Steels

    … aims at investigating the machinability of duplex, grade 1.4462 and super duplex stainless steels, grade 1.4410 from a tool wear perspective, assessing factors such as cutting forces, chip thickness, and wear evolution. To investigate it, two types of tests were used: orthogonal and …

    chalmers Repository record for Machinability of Duplex and Super Duplex Stainless Steels (opens in a new tab)

  11. Performance Evaluation of CBN Tools in High-Speed Dry Turning of AISI 1018 Low Carbon Steel

    … condition is the essential goal of this study. Built-up-edge (BUE) is often formed in the low-carbon-steel machining process, which, results in poor surface finish and short tool life. The high-speed-machining technique can be used to reduce the BUE formation and realize an increase in …

    mcmaster Repository record for Performance Evaluation of CBN Tools in High-Speed Dry Turning of AISI 1018 Low Carbon Steel (opens in a new tab)

  12. Structure-Property Evaluation of CrN Coatings Developed for BUE Dominated High-Speed Machining Applications

    … and chemical properties. These coatings exhibit superior hardness compared to high-speed steel and cemented carbide along with notable protective capabilities against corrosion and wear. These coatings have been successfully used to enhance the properties of cemented carbide and steel tools while …

    mcmaster Repository record for Structure-Property Evaluation of CrN Coatings Developed for BUE Dominated High-Speed Machining Applications (opens in a new tab)

  13. Towards an understanding of high strength metastable β titanium alloy machinability

    … while the efficiency of coated tools increased. Built up edge (BUE) was prominent in Ti-5Al-5Mo-5V-3Cr machining, resulting in poor machined surface quality and reducing process stability. Analysis of Ti-5Al-5Mo-5V-3Cr and WC-Co interfaces using transmission electron microscopy showed that during …

    whiterose Download PDF for Towards an understanding of high strength metastable β titanium alloy machinability (opens in a new tab)

  14. Factors Affecting Surface Topography in Diamond Turning

    … SPDT is primarily affected by four factors: Tool edge quality, relative vibration between the tool and workpiece, material properties and microstructure, and tool geometry (nose radius and machining parameters) machining. To the author’s knowledge, no work has been done to combine all the factors …

    mcmaster Repository record for Factors Affecting Surface Topography in Diamond Turning (opens in a new tab)

  15. An Investigation of Chipping Generation and Propagation on Carbide Tool under Various Cutting Conditions in End Milling of Low Carbon Steel

    … can be classified as tool wear, chipping, and built-up edge. The chipping, which is one of the decisive tool conditions when the brittle milling tools are used in milling, has not been well investigated by previous studies since the chipping is randomly occurs. Therefore, the main objective of …

    rit Repository record for An Investigation of Chipping Generation and Propagation on Carbide Tool under Various Cutting Conditions in End Milling of Low Carbon Steel (opens in a new tab)

  16. An Analysis of On-Axis Rotation Pin-on-Disc Tribometry and its Correlation to Friction in Metal Cutting

    … rotating stage of the test; the severity of pile-up of work material around the periphery of the imprint; different zones of contact at the imprint surface; and evidence of (or lack thereof) of bulk shear in the surrounding work material below the surface of the disc. The importance of estimating …

    mcmaster Repository record for An Analysis of On-Axis Rotation Pin-on-Disc Tribometry and its Correlation to Friction in Metal Cutting (opens in a new tab)

  17. DEVELOPMENT OF ADAPTIVE PVD COATED ADVANCED COMPOSITE (CERMET) TOOLS FOR HIGH-SPEED DRY MACHINING OF STAINLESS STEEL

    … and ductility of the material resulting in built-up edge formation. Machining stainless steel at lower cutting speeds must be performed with coolant, which adds to the cost of the process and increases concerns for the environment and the operator's health and safety. Industries such as the …

    mcmaster Repository record for DEVELOPMENT OF ADAPTIVE PVD COATED ADVANCED COMPOSITE (CERMET) TOOLS FOR HIGH-SPEED DRY MACHINING OF STAINLESS STEEL (opens in a new tab)

  18. Machinability effects of stainless steels with a HIPed NiTi coating in high-efficiency machining operations

    … (Hot Isostatically Pressed) austenitic 316L, duplex 2205 and super duplex 2507, and as-cast 304 stainless steel, in turning HIPed 316L, duplex stainless steel 2205 and X5 CrMnN 18 18 stainless steel, and in drilling HIPed PM (Powder Metallurgic) Duplok 27 and duplex stainless steel ASTM8190 1A …

    aalto Repository record for Machinability effects of stainless steels with a HIPed NiTi coating in high-efficiency machining operations (opens in a new tab)

Page 1 of 2