Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 130 for “"Bulging"”.

  1. Analysis of bulging, bursting, and reliability-based design and optimization for pipelines

    … parameters, pre-straining, and pipe curvature on bulging. The Taguchi methodology was utilized for optimizing the operating, geometric, and material parameters. The analysis of variance (ANOVA) approach was also used to study the relative contribution of material properties, process parameters, …

    wichita-thes Repository record for Analysis of bulging, bursting, and reliability-based design and optimization for pipelines (opens in a new tab)

  2. Finite element assisted prediction of ductile fracture in sheet bulging of magnesium alloys

    … In this study a Finite Element Model of a sheet bulging process was built and validated with results obtained from physical testing. The FEA model uses Oyane’s ductile fracture criterion to predict whether fracture has occurred in the material and also to predict the location of fracture if it …

    dcu Download PDF for Finite element assisted prediction of ductile fracture in sheet bulging of magnesium alloys (opens in a new tab)

  3. Beyond the bulging binder : family-centered design of an information management system for caregivers of children living with health complexity

    Children Living with Health Complexity (CLHC) require continuity of health and community care to improve their quality of life and decrease family care burden. Due to medical complexity and numerous chronic conditions, these children rely heavily on multiple care providers. However, a fragmented …

    ubc Repository record for Beyond the bulging binder : family-centered design of an information management system for caregivers of children living with health complexity (opens in a new tab) Download PDF for Beyond the bulging binder : family-centered design of an information management system for caregivers of children living with health complexity (opens in a new tab)

  4. An analysis of the synoptic and mesoscale forcing of the 08/09 March 1992 STORMFEST mesoscale convective system

    … STORMFEST in 1992. The MCS, associated with a bulging dryline, produced five tornadoes, widespread flash flooding, large hail and damaging winds. An analysis of the root causes of this convective system was conducted using the coarse gridded Global Data Assimilation (GDAS) Final Analysis …

    nps Repository record for An analysis of the synoptic and mesoscale forcing of the 08/09 March 1992 STORMFEST mesoscale convective system (opens in a new tab)

  5. Controlled nanometer liquid layer thicknesses for the study of nanomaterials and biospecimens in liquid-cell transmission electron microscopy

    … thin liquid layers in the absence of membrane bulging has remained a challenge. The bulging of window membranes causes inhomogeneity across the viewing area of the assembled NFC. Since conventional NFCs are structurally sensitive to handling and are assembled in the atmosphere of the laboratory …

    waterloo Repository record for Controlled nanometer liquid layer thicknesses for the study of nanomaterials and biospecimens in liquid-cell transmission electron microscopy (opens in a new tab)

  6. Study on Knudsen flow through membrane pores using analytical approximation and Monte Carlo method

    … of linearly diverging-converging, sinusoidally bulging, and periodic tubes as compared with TPs of conventional straight cylinders. An exact analytic solution for the TP through the straight cylindrical tube was developed using the standard diffusion theory with a linear concentration …

    hawaii Repository record for Study on Knudsen flow through membrane pores using analytical approximation and Monte Carlo method (opens in a new tab)

  7. Mathematical modelling of the unbending of continuously cast steel slabs

    … has been developed to calculate the bending and bulging deformation of a partially solidified continuously cast steel slab during straightening on a curved-mould casting machine. A preliminary, three-dimensional elastic analysis revealed that a two-dimensional plane-stress model is sufficient for …

    ubc Repository record for Mathematical modelling of the unbending of continuously cast steel slabs (opens in a new tab) Download PDF for Mathematical modelling of the unbending of continuously cast steel slabs (opens in a new tab)

  8. FORMABILITY OF SHEET-METAL UNDER LATERAL PRESSURE

    … a certain point, the second or advanced mode of bulging sets in, and the bulge deviates increasingly from sphericity until fracture occurs. Throughout deformation, the bulge surface is never spherical, but exhibits a complex geometry which has yet to be explained theoret- ical. The die-shoulder …

    nus Repository record for FORMABILITY OF SHEET-METAL UNDER LATERAL PRESSURE (opens in a new tab) Download file for FORMABILITY OF SHEET-METAL UNDER LATERAL PRESSURE (opens in a new tab)

  9. Kinematic Modeling of Asymmetric Vocal Fold Vibration

    … such as vocal fold adduction, medial surface bulging, vibratory nodal point, phase, amplitude of vibration, and fundamental frequency. The resultant signals were subjected to aerodynamic and acoustic measurement as well as perceptual rating of voice quality. Results revealed that the degree of …

    arizona-thes Repository record for Kinematic Modeling of Asymmetric Vocal Fold Vibration (opens in a new tab)

  10. A Study of the Interface Between a Turbulent Boundary Layer and the Irrotational Free Stream

    … are assumed. The model predicts pairs of upward bulging and downward jetting events. The size of these events shows that this model may represent the typical eddies which have been described by other investigators. The wall-ward jetting indicates the occasional engulfment of inviscid flow into …

    odu Repository record for A Study of the Interface Between a Turbulent Boundary Layer and the Irrotational Free Stream (opens in a new tab)

  11. Inferring Mechanical Properties of Films Subjected to Bulge Testing

    … loading rates, revealing that quasi-static bulging primarily induces bending, whereas dynamic bulging generates biaxial stretching due to inertial effects. The dynamic regime amplifies displacement and stress across the film thickness, creating conditions that activate failure mechanisms …

    tamu Repository record for Inferring Mechanical Properties of Films Subjected to Bulge Testing (opens in a new tab) Embargoed until 2028-05-01

  12. Inferring Mechanical Properties of Films Subjected to Bulge Testing

    … loading rates, revealing that quasi-static bulging primarily induces bending, whereas dynamic bulging generates biaxial stretching due to inertial effects. The dynamic regime amplifies displacement and stress across the film thickness, creating conditions that activate failure mechanisms …

    tamu Repository record for Inferring Mechanical Properties of Films Subjected to Bulge Testing (opens in a new tab) Embargoed until 2028-05-01

  13. Inferring Mechanical Properties of Films Subjected to Bulge Testing

    … loading rates, revealing that quasi-static bulging primarily induces bending, whereas dynamic bulging generates biaxial stretching due to inertial effects. The dynamic regime amplifies displacement and stress across the film thickness, creating conditions that activate failure mechanisms …

    tamu Repository record for Inferring Mechanical Properties of Films Subjected to Bulge Testing (opens in a new tab) Embargoed until 2028-05-01

  14. The production of hollow-ware by deep drawing and bulge forming.

    … The process consists of drawing, ironing and bulging inside a closed die cavity. The constituent operations are studied individually. In deep drawing without a blank-holder, an approach to convex type die design is presented. The investigation evaluates the effect of die profile geometry on …

    whiterose Download PDF for The production of hollow-ware by deep drawing and bulge forming. (opens in a new tab)

  15. Plastic postbuckling behaviour of axially compressed cylindrical shells

    … yield condition is used, and it is found that bulging is most suitably described by a three-hinge model. The bulge length of the collapse mode can be predicted approximately by using the upper-bound theorem. Agreement with the theoretical and experimental results is satisfactory.

    ubc Repository record for Plastic postbuckling behaviour of axially compressed cylindrical shells (opens in a new tab) Download PDF for Plastic postbuckling behaviour of axially compressed cylindrical shells (opens in a new tab)

  16. An Evaluation of College Days Based upon Opinions of Iowa State Teachers College Freshmen

    … makes it evident that colleges will soon be bulging at the seams. This increase in college enrollment makes some sort of college information program appear more important than ever before.

    northern-iowa Repository record for An Evaluation of College Days Based upon Opinions of Iowa State Teachers College Freshmen (opens in a new tab)

  17. Fluid-induced large deformation at soft material interfaces with blisters and craters

    … a nonlinear membrane theory to characterize the bulging and bulging-induced delamination process of the soft membrane. Elasto-capillary effects are considered due to their significance at small-scales. Solutions for both rigid and soft substrates are obtained. For rigid substrates, a variety of …

    texas Repository record for Fluid-induced large deformation at soft material interfaces with blisters and craters (opens in a new tab)

  18. Kinematic behavior of sheared sand with emphasis on particle to particle interaction using computed tomography

    … via a single well-defined shear band or via a bulging mode. Dense specimens tested under low confining pressure, as well as loose specimen exhibited a preference to fail via bulging in the middle of the specimens. The second part of the Thesis presents an experimental validation of the finite …

    ut-knoxville Repository record for Kinematic behavior of sheared sand with emphasis on particle to particle interaction using computed tomography (opens in a new tab)

  19. Extruder dynamics and control in large scale additive manufacturing

    … there are many part defects, such as bulging at corners and improper part seams that arise due to a lack of information about the extruder. To reduce the number of part defects, it is necessary to understand and control the extruder dynamics. A bead characterization system (BCS) was …

    gatech Repository record for Extruder dynamics and control in large scale additive manufacturing (opens in a new tab)

  20. Rheology of porous rhyolite

    … flattening of ash particles, and radial bulging of the cores. The continuous reduction of porosity leads to a dynamic transient strain-dependent rheology and requires strain to be partitioned between a volume (porosity loss) and a shear (radial bulging) component. The effect of increasing …

    ubc Repository record for Rheology of porous rhyolite (opens in a new tab) Download PDF for Rheology of porous rhyolite (opens in a new tab)

Page 1 of 7