Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 173 for “"Burning Rate"”.
-
Determination of the burning rate of small diameter aluminum wire
… high speed motion picture photography to burning rate data. Because combustion of aluminum evolves oxide smoke which obscures motion picture vision, a method utilizing an electronic counting circuit and infrared sensitive cadmium sulfide photo conductive cells in lieu of motion picture …
-
The Effect of Accelaration on the Burning Rate Double Base Rocket Propellants.
… at two pressures and nine accelerations. ,The burning rates were measured to isolate the effect of the aluminum. The burning rate of the non-aluminized propellant was found to vary with acceleration and a model was advanced. The addition of aluminum causes an increase in burning rate at higher …
-
Effects of Fire Whirl Generator Dimensions on Flame Length and Burning Rate
In-situ burning remains an efficient method of oil spill cleanup, but the implementation of fire whirls over the spilled fuel has the potential increase the speed and efficacy of the process by increasing burning rate and temperature. Logistical requirements would then be placed on the size of the …
-
The effect of radiative heat feedback on burning rate of metalized propellants
Restriction data tranferred 2014-07-01T11:27:36-05:00 Original Data Group with Access UIUC Users [automated] Release Date: none Reason: ETDs are only available to UIUC Users without author permission
-
Development and analysis of a Burning Rate Emulator (BRE) for study in microgravity
The Burning Rate Emulator (BRE) is a gas-fueled burner that emulates real condensed fuel flames. This is accomplished by matching four fundamental properties: heat of gasification, heat of combustion, surface temperature, and smoke point. The aim of the current study is to establish immediate …
-
Predicting the Ignition Time and Burning Rate of Thermoplastics in the Cone Calorimeter
Ignition and burning rate data are developed for Nylon 6/6, Polyethylene, and Polypropylene in a Cone Calorimeter heating assembly. The objective is to examine a testing protocol that leads to the prediction of ignition and burning rate for thermoplastics from Cone data. The flame heat flux is not …
-
Burning Rate Characterization of Ammonium Perchlorate Pellets Containing Micro- and Nano-Catalytic Additives
Ammonium perchlorate (AP) is an extensively used oxidizer in solid composite propellants, and its combustion behavior can be tailored by the presence of catalytic additives such as metal oxides. Nano-sized metal oxide catalysts have been utilized in place of their micro-sized counterparts to tailor …
-
Hybrid Rocket Burning Rate Enhancement by Nano-Scale Additives in HTPB Fuel Grains
Low regression rates in hybrid rockets limit their use and capability, but additive aluminum nano-particles represent a possible solution to this problem. In this thesis, aluminum nano-particles were characterized and added to hybrid motor grains to assess their effects on the combustion behavior …
-
Analysis of the Burning Rate Behavior of Self-Extinguishing AP/HTPB Composite Solid Propellants
… solid propellants containing ammonium perchlorate (AP) as the oxidizer, hydroxyl-terminated polybutadiene (HTPB) as the binder, and isophorone diisocyanate (IPDI) as the curing agent. AOT concentrations ranging from 3-10% by mass were added to propellant mixtures, and extinguishing pressures …
-
The effect of strand size on experimental measurement of solid propellant burning rate augmentation.
The burning rates of metallized solid propellant strands ranging in cross-section from 1/4 x 1/4 inch to 1 x 1 inch and in length from 1/2 inch to 2 inches were tested at five acceleration levels and three pressure levels to determine the effect of the presence of a rigid inhibitor case on measured …
-
An investigation of the effect of acceleration on the burning rate of composite propellants
The average burning rates of composite solid rocket propellant were measured in acceleration fields up to 2000 times the standard acceleration of gravity. The acceleration vector was perpendicular to and into the burning surface. Propellant strands were burned in a combustion bomb mounted on a …
-
Subsurface heterogeneity and ammonium perchlorate gas-phase decomposition as composite propellant burning rate controlling mechanisms
Electronic Thesis or Dissertation
-
Using a Burning Rate Emulator to Analyze Flame Extinction Time on the International Space Station
… Combustion in Microgravity Experiments, the Burning Rate Emulator (BRE) is used to improve the fundamental understanding of material flammability in microgravity, including the conditions that affect extinction behavior. Oscillation onset and extinction times were measured for emulated flames …
-
Modifying burning rate and agglomeration size in aluminized composite solid propellants using mechanically activated metals
… physical mixture of aluminum and magnesium. The burning rate of propellant using the prepared powder is increased. MA Al/Mg powders as long as with comparable physical mixture are applied in propellant formulation with AP/HTPB. In order to quantify the effect of changing Mg percent. Burning rate …
-
Statistical Uncertainty of the Ignition Time, Burning Rate, and Extinction Characteristics of Engineered Timber Products
… parameters such as time to ignition, mass loss rate (MLR), and extinction criteria is critical for understanding ignition and burning behavior of timber products. These parameters, often determined with bench scale experiments, have previously been presented in literature. However, standard test …
-
USING A BURNING RATE EMULATOR (BRE) TO EMULATE CONDENSED FUELS AND STUDY POOL FIRE BEHAVIOR IN 1G
The Burning Rate Emulator (BRE) is a device constructed to emulate condensed fuels using gaseous fuel mixtures by matching heat of combustion, heat of gasification, smoke point, and surface temperature. The burner’s heat flux gauges are calibrated for local heat flux measurements and the copper …
-
Effect of particle size and particle size distribution on the burning rate of barium chromate-boron pyrotechnic delay compositions
<p>The burning rate of barium chromate-boron delay compositions is shown to be related to the 10 percent particle size point on the particle size distribution curve (particle size vs. percent greater than size) for either of the components. The burning rate is also shown to be inversely …
Page 1 of 9