Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Burr formation"”.
-
Investigation of interlayer burr formation in the drilling of stacked aluminum sheets
… drilling process, sharp edges of material called burrs are produced and protrude from the original surface. When a through-hole is drilled, burrs form on both the entry and exit surfaces around the hole, requiring expensive deburring operations to be performed in order to meet part specifications. …
-
Burrs understanding, modeling and optimization during slot milling of aluminium alloys
… accuracies, reduced tensile residual stress and burr-free. The burr formation is one of the most common and undesirable phenomenon occurring in machining operations, which reduces assembly and machined part quality. Therefore, it is desired to eliminate the burrs or reduce the effort required to …
-
Force modeling in drilling with application to burr minimization
In the aerospace industry, burr removal is a very important part of the manufacturing process. Stacks of material on sections of an aircraft are assembled and drilled by hand. Due to extensive burr formation the sheets must be destacked so that burrs can be removed and then the stacks are …
-
Development of a high-speed high-precision micro-groove cutting process
A high-speed, high-precision chip formation-based micro-groove cutting process has been developed for cutting grooves in metals with nearly arbitrarily shaped cross-sections, which have widths and depths of a few hundred nanometers to a few microns, and lengths of tens of millimeters. A flexible …
-
Vibration Assisted Drilling of Carbon Fiber Reinforced Polymer and Titanium Alloy for Aerospace Application
… machining defects such as delamination, burr formation, reduced surface integrity, and tensile residual stresses. These machining defects are attributed to high thermal load, continuous chip morphology, and poor chips evacuation efficiency. Vibration-assisted drilling (VAD) uses an …
-
INVESTIGATION ON BURR CONTROL DURING THE DRILLING OF DUCTILE MATERIALS
Burrs are rough protrusions that form along the edge of a component during processing and are commonly produced during machining. Generally, the presence and severity of a burr directly impacts the final part quality. Thus, burrs need to be removed in subsequent processes to avoid injury when …
-
Machinability Study on Silicon Carbide Particle-Reinforced Aluminum Alloy Composite with CVD Diamond Coated Tools
… relationship between cutting forces, tool wear, burr formation, surface roughness, and material removal rate (MRR). Experimental milling tests are conducted using CVD diamond coated end mills and non-diamond tungsten carbide end mills. It was found that low tool rotation speeds, feed rates and …
-
Micromilling of titanium alloys : a comparison between workpieces produced by casting, ECAP and 3D printing (SLM)
… considering cutting forces, surface roughness, burr formation, microchips morphology as well as their mechanical properties and their influence in each factor was analyzed. It was designed a series of experiments varying feed per tooth and covering a wide range, from 0.5 to 4.0 µm, so a possible …
-
Development of an ultra precision machine tool for micro machining
… has been paid to the cut quality including the burr formation, chip formation, finished surface. Experiments have been done using different materials such as copper, aluminum, silica, titanium and platinum.
-
Machining Fibre Metal Laminates and Al2024-T3 aluminium alloy
… and damage investigated were surface roughness, burr formation at both sides of the workpiece and interlayer burr, hole size and circularity error, chip formation as well as damage described at the macro level (delamination area) using computerised tomography (CT) scan, and at the micro level …
-
Vibration Assisted Drilling of Aluminum 6061-T6
<p> Burr formation is a frequent problem in metal cutting. Burrs, which are defined as undesired projections of material resulting from plastic deformation, affect the precision of machined components and can negatively affect the assembly process. One common burr is the exit burr that forms when …
-
Drilling of Ti/CFRP/A1 multilayer stack materials
… hole accuracy/quality, tool wear/life, burr formation and hole surface integrity (microhardness and microstructure). Statistical design of experiments and associated analysis techniques (main effects plots, ANOVA etc.) were employed to identify the significance of variable factors and …
-
Micromilling of hardened (62 HRC) AISI D2 cold work tool steel
… wear, surface roughness, cutting forces, burr formation, slot geometry accuracy and workpiece surface integrity. The influence of operating parameters (cutting speed, feed rate and depth of cut) on tool life, surface roughness, burr width and cutting forces was evaluated using full …
-
High throughput profile millling for the flexible and accelerated processing of electric steels
… to obtain maximum productivity and minimal burr formation. Finally, the impact of HTPM processing on the magnetic properties of electrical steels will be compared to that of a leading prototyping technology, AWJ machining.
-
Machinability of stainless steel alloys
… of cut on the surface roughness, cutting forces, burr formation and chip formation. A great emphasis is put on the materials interactions with the machining process. For these machining tests, specimens were machined under different cutting parameters using the same tool in order to develop a …
-
Abrasive assisted brush deburring of micromilled features with application to a novel surgical device
Burrs severely inhibit the performance and aesthetics in machined parts besides posing a safety risk to the user and manufacturer. Abrasive assisted brushing presents a fast and effective method for deburring these parts but is difficult to control. The dependence of deburring rate on the workpiece …
-
Simulation and prediction of machining conditions influences on part surface integrity and metallic particle emission using multi-physics modeling
… Dynamic Recrystallization (DRX), phase transformation and textural orientation changes, which modify the mechanical properties of the subsurface and consequently influence the fatigue strength and service life of manufactured components. Despite extensive research into the integrity of …
-
Analysis and simulation of micro milling process
… is shown that reducing depth of cut can reduce burr formation. In addition, the width of deformed chips has been measured considerably close to the depth of cut value. To investigate the size effect on cutting performance, the prediction of cutting forces derives from a simplified orthogonal …
-
Tooling performance in micro milling: Modelling, simulation and experimental study
… tool stresses, tool temperatures, milling chip formation and temperatures have been comprehensively studied and compared for potential micro tool design and optimization purposes. In an effort to prolong the tool life and enhance the tooling efficiency, DLC and NCD coatings have been deposited …
-
Development of meso-scale flexible cutting tool for micro-groove cutting in steel
… profile, repeatability and consistency. Side burr formed during the cutting process were assessed through a series of experiments to arrive at the most suitable machining parameters for burr minimization. Multiple tool passes and high cutting speed yielded the lowest side burrs. Tool wear …
Page 1 of 2