Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Burrs"”.
-
The Formation and Properties of Machining Burrs
The formation of burrs in Machining Operations occurs by three Basic Mechanisms: 1) Lateral Extrusion of material 2) Bending of the chip 3) Tearing of the chip form the workpiece Each of these mechanisms has been studied analytically and compared to experimental results. The agreement between …
-
Burrs understanding, modeling and optimization during slot milling of aluminium alloys
… Therefore, it is desired to eliminate the burrs or reduce the effort required to remove them. Amongst machining operations, slot milling has a more complex burr formation mechanism with multiple burrs appear in machined part edges with non-uniform dimensions. The ultimate goal of this …
-
Investigation of interlayer burr formation in the drilling of stacked aluminum sheets
… drilling process, sharp edges of material called burrs are produced and protrude from the original surface. When a through-hole is drilled, burrs form on both the entry and exit surfaces around the hole, requiring expensive deburring operations to be performed in order to meet part specifications. …
-
The use of alternative feeding strategies to improve feedlot beef cattle growth performance and nutrient utilization
… such as yeast as a feed additive and cotton burrs as a roughage source to improve feedlot beef cattle growth performance and nutrient utilization were evaluated in two experiments. The first experiment evaluated the effects of live yeast fed to natural program beef steers and its effect on …
-
INVESTIGATION ON BURR CONTROL DURING THE DRILLING OF DUCTILE MATERIALS
Burrs are rough protrusions that form along the edge of a component during processing and are commonly produced during machining. Generally, the presence and severity of a burr directly impacts the final part quality. Thus, burrs need to be removed in subsequent processes to avoid injury when …
-
Abrasive assisted brush deburring of micromilled features with application to a novel surgical device
Burrs severely inhibit the performance and aesthetics in machined parts besides posing a safety risk to the user and manufacturer. Abrasive assisted brushing presents a fast and effective method for deburring these parts but is difficult to control. The dependence of deburring rate on the workpiece …
-
Ultrasonic Assisted Drilling
… material produced during metal cutting, known as burrs, significantly reduces the accuracy of the parts and affect both the assembly process and product quality. Around 30% of total production costs are used for deburring processes. This thesis presents one modem and promising method in reducing …
-
Mesoscale Edge Characterization
… In these parts, the concern is not only with burrs, which can be formed by some mesoscale manufacturing processes, but also with the shape and size of the edge. These properties are critically important as the edge can constitute a large percentage of the smallest features of mesoscale …
-
Force modeling in drilling with application to burr minimization
… formation the sheets must be destacked so that burrs can be removed and then the stacks are reassembled and fastened together. If burrs are minimized in the drilling process, this would reduce the necessity for the sheets to be destacked and deburred. One approach to minimizing burrs is to lower …
-
Inter-laminar Contacts and Losses in Cores of Electrical Machine
… of punching and pressing processes forms random burrs at the edges of electrical sheets. These burrs form random inter-laminar galvanic contacts when pressed. Several numerical formulations based on finite element method were developed. A surface boundary layer model is implemented in a 2D finite …
-
Graduate recital in violin
Naima Burrs performed her Master of Music Recital in violin on April 2, 2018, at 8:00 pm in the Gallagher-Bluedorn Performing Art Center’s Davis Hall. She was assisted by pianist Mariya Akhadjanova. The program selected included César Franck’s Sonata in A Major for piano and violin (1886), Keith …
-
A model to predict the three-dimensional cutting force system for drilling with arbitrary point geometry
… and cylindricity errors, surface finish, burrs, delamination in drilling composites, etc. Most of these parameters are related to the cutting forces generated in the process. Modeling the cutting forces in drilling, in terms of the tool geometry and machining conditions, is an important …
-
Cotton harvesting effects on fiber and yarn properties
… (leaves, sticks, stems, bracts, grass, and burrs) were added individually by hand to simulate the trash content of stripped cotton. Classer's grade and staple length, length by the Fibrograph, micronaire index, lint color, tenacity, elongation, and yarn strength were determined from the lint …
-
Graduate voice recital
… Chaminade, and Libby Larsen. Violinist Naima Burrs was featured in the Mozart aria, “L’amerò, sarò costante.” This abstract serves as a brief analysis of the historical background, text, and musical characteristics present in the listed selections.
-
Ripple Effects: The Transformation of SFASU Women's Social clubs to National Sororities
… late 1920s, women formed the Amities and Pine Burrs to develop friendships and a sense of belonging. The Fideles and Sigma Gammas arrived on campus in the late 1940s as more women began attending SFA. Dr. Ralph W. Steen’s appointment as president brought significant changes to SFA and …
-
Development of Electrochemical Micro Machining
… agreed with theoretical models within 10%. Micro burrs can be effectively removed by optimal μECM. A sacrificial layer helped to improve the hole profile since it reduced 43% of corner rounding.
-
On the Modeling and Analysis of Machining Performance in Microendmilling
… cutting edge moves between phases resulting in burrs at the phase boundaries and the associated increases in surface roughness.
-
Vibration Assisted Drilling of Aluminum 6061-T6
… is a frequent problem in metal cutting. Burrs, which are defined as undesired projections of material resulting from plastic deformation, affect the precision of machined components and can negatively affect the assembly process. One common burr is the exit burr that forms when drilling …
-
Drilling of carbon fibre reinforced plastic (CFRP) and metal matrix composites (MMC)
… edge quality (delamination, uncut fibres and burrs) as well as workpiece surface integrity (surface roughness, microhardness, fibre / particle pullout, subsurface damage, etc.). The latest cutting tool materials and advanced diamond coatings, drill geometry and design format (e.g. domed PCD) …
Page 1 of 3