Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 71 for “"Burst pressure"”.

  1. Relating Burst Pressure to Seal Peel Strength In Pouches

    … was aimed at studying the relationship between burst pressure and seal peel strength. Past researchers developed a force balance equation based on the analysis of a force diagram to relate burst pressure to seal strength. The theoretical formula S=P(D/2) (S=Seal Strength, P=Burst Pressure, …

    clemson Repository record for Relating Burst Pressure to Seal Peel Strength In Pouches (opens in a new tab)

  2. Development of a burst pressure prediction model for flawless and dented pipelines

    Accurate prediction of the burst pressure of a pipeline is critical for pipeline design and safe operation. There are a number of analytical and empirical formulae derived from theoretical, numerical and experimental methods that can be used to predict the burst pressure of plain pipeline. However, …

    strathclyde Repository record for Development of a burst pressure prediction model for flawless and dented pipelines (opens in a new tab)

  3. Burst Pressure Prediction of Filament Wound Composite Pressure Vessels Using Acoustic Emission

    … from flaw growth activity can be used to predict burst pressures in filament wound composite pressure vessels. Acoustic emission data were taken during hydroproof testing for a set of eleven ASTM standard 5.75 inch diameter fiberglass/epoxy bottles. Amplitude distributions were created using only …

    embry-riddle Repository record for Burst Pressure Prediction of Filament Wound Composite Pressure Vessels Using Acoustic Emission (opens in a new tab)

  4. Short-Term and Long-Term Burst Pressure of Cylinders and Cylinder-Cylinder Intersections

    … power engineering, and construction. Unexpected bursting of cylinders or cylinder-cylinder intersections is dangerous and can cause much damage even loss of life. Therefore, it is necessary and important to know the burst pressure of both cylinders and cylinder-cylinder intersections before using …

    marquette Repository record for Short-Term and Long-Term Burst Pressure of Cylinders and Cylinder-Cylinder Intersections (opens in a new tab)

  5. Neural Network Burst Pressure Prediction in Composite Overwrapped Pressure Vessels from Acoustic Emission Data

    … have been obtained by switching from all metal pressure vessels to composite overwrapped pressure vessels (COPVs). Due to the nature of composites, current nondestructive analysis procedures for COPVs are not adequate for assessing structural integrity. As such, new methods must be developed. …

    embry-riddle Repository record for Neural Network Burst Pressure Prediction in Composite Overwrapped Pressure Vessels from Acoustic Emission Data (opens in a new tab)

  6. Impact of Pouch Dimensions on Relationship Between Burst Pressure and Seal Peel Strength in Flexible Pouches

    A known model relating seal peel strength to burst pressure was studied to determine if altering pouch size had an impact on the model. The model tested was S=(D/2)P, where the seal peel strength is equal to the burst pressure multiplied by half of the plate gap. Past researchers, such as Yam …

    clemson Repository record for Impact of Pouch Dimensions on Relationship Between Burst Pressure and Seal Peel Strength in Flexible Pouches (opens in a new tab)

  7. Neural Network Burst Pressure Prediction in Composite Overwrapped Pressure Vessels Using Mathematically Modeled Acoustic Emission Data

    The purpose of this research was to predict burst pressures in composite overwrapped pressure vessels (COPV) using mathematically modeled acoustic emission (AE) data. The AE data were collected during hydrostatic burst (hydroburst) testing often 15-inch (380 mm) diameter COP Vs. The data gathered …

    embry-riddle Repository record for Neural Network Burst Pressure Prediction in Composite Overwrapped Pressure Vessels Using Mathematically Modeled Acoustic Emission Data (opens in a new tab)

  8. Burst Pressure Prediction for Pipelines with Selective Seam Weld Corrosion Using Experimental Validation, Finite Element Analysis, and Physics-Guided Modeling

    … concentration, plastic strain localization, and burst pressure. Conventional remaining-strength assessment methods are computationally efficient, but they generally do not explicitly account for vertex-radius effects. Conversely, finite element analysis (FEA) can capture the detailed mechanics of …

    houston Repository record for Burst Pressure Prediction for Pipelines with Selective Seam Weld Corrosion Using Experimental Validation, Finite Element Analysis, and Physics-Guided Modeling (opens in a new tab) Embargoed until 2028-08-01

  9. Low-cost fabrication methods for creating an inertial-based, multiphase microfluidic bioaerosol sampler

    … bond quality for a leak free device, good burst pressure capabilities due to high relative air pressures, and medium resolution feature sizes in the microfluidic design scheme (400 µm to 900 µm feature sizes). Sample devices were fabricated to similar dimensions to evaluate performance in …

    iastate Repository record for Low-cost fabrication methods for creating an inertial-based, multiphase microfluidic bioaerosol sampler (opens in a new tab)

  10. Seal strength models for medical device trays

    … was developed and used for identifying burst and peel locations and comparing burst pressure and peel force. Multiple linear regression was used to fit 76 models, selecting the best models based on the Akaike Information Criterion (AIC) and adjusted R2 (R2 adj) value of each model. The …

    tamu Repository record for Seal strength models for medical device trays (opens in a new tab)

  11. Glass-Polymer Composite Pipes and Joints: Manufacturing, Testing, and Characterization

    … feasibility of GFRP pipe implementation in high- pressure, transmission lines. These investigations have sought to determine GFRP pipe properties of strength, stiffness, corrosion resistance, failure modes, and long-term behavior.;During this project, hydrostatic burst pressure testing (internal …

    wvu Repository record for Glass-Polymer Composite Pipes and Joints: Manufacturing, Testing, and Characterization (opens in a new tab)

  12. Temperature and Pressure Effects on Tissue Sealing and Protein Denaturation

    … has been concerned on the end-goal results of burst pressure, and not as much time has been spent investigating the more fundamental properties of tissue sealing which include temperature, pressure, time, vessel composition, disease state, and sealing modality (i.e., thermal, radiofrequency, …

    umn Repository record for Temperature and Pressure Effects on Tissue Sealing and Protein Denaturation (opens in a new tab)

  13. Computational Modeling and Optimization of a Novel Shock Tube to Study Blast Induced Traumatic Brain Injury

    … 16”; working fluid - compressed air and helium; burst pressure- 20 to 55 psi. A total of 240 simulations were run to evaluate the effect of these factors on the pressure profile. Computations were carried out using commercial software, Star CCM+ (CD-adapco, NY, USA). Assumptions used to model the …

    tamu Repository record for Computational Modeling and Optimization of a Novel Shock Tube to Study Blast Induced Traumatic Brain Injury (opens in a new tab)

  14. The Effect of Corrosion Defects on the Failure of Oil and Gas Transmission Pipelines: A Finite Element Modeling Study

    … of pipeline, which poses a risk in high-pressure operations. Specifically, in pipelines with long history of operation, the size and location of the corrosion defects need to be determined so that pressure levels can be kept at safe levels, or alternatively, a decision to repair or …

    unf Repository record for The Effect of Corrosion Defects on the Failure of Oil and Gas Transmission Pipelines: A Finite Element Modeling Study (opens in a new tab) Download PDF for The Effect of Corrosion Defects on the Failure of Oil and Gas Transmission Pipelines: A Finite Element Modeling Study (opens in a new tab)

  15. Development Of Biologically-Engineered Blood Vessels Towards Clinical Translation

    … for clinical applicability in vitro through burst pressure testing, suturability, as well as, endothelial cell and platelet compatibility. The developed BEBVs had an average burst pressure of 229 ± 23.8 mmHg and were successfully sutured to the abdominal aorta of a rabbit demonstrating their …

    wayne-thes Repository record for Development Of Biologically-Engineered Blood Vessels Towards Clinical Translation (opens in a new tab)

  16. Elastic and Inelastic Finite Element Analysis of Cylindrical Shell Intersections

    … experiences plastic behavior. Limit load and burst pressure analyses are two of the failure modes that can be investigated through the use of elastic-plastic stress analysis. The objective of this thesis is to systematically investigate the cylindrical shell intersection problem from the …

    marquette Repository record for Elastic and Inelastic Finite Element Analysis of Cylindrical Shell Intersections (opens in a new tab)

  17. Optimizing preservation of umbilical vein segments for use as autologous shunts in neonatal cardiac repair

    … 0) and at the end of culture and compared by burst pressure, histopathology, platelet adhesion and scanning electron microscopy (SEM). RESULTS: Burst pressure strength of veins from Day 0 to up to two weeks of preservation did not significantly differ (431 ± 229 mmHg vs 438 ± 244 mmHg). …

    bu Repository record for Optimizing preservation of umbilical vein segments for use as autologous shunts in neonatal cardiac repair (opens in a new tab)

  18. Determining ideal staple size for small intestinal surgery in cats

    … cat jejunum, were evaluated via intestinal burst pressure testing for maximum intraluminal pressure prior to leaking, and via infusion of an intravascular dye at normal arterial pressures to determine percentage of vascular patency past the staple lines. Vascular patency was compared not …

    vt Repository record for Determining ideal staple size for small intestinal surgery in cats (opens in a new tab)

  19. Effect of Pre-Bending and Hydroforming Parameters on the Formability of Advanced High Strength Steel Tube

    … in hydroforming EF resulted in increased burst pressure and corner-fill expansion (CFE). The effect of bending boost on CFE was also measured. For a given hydroforming EF case, a tube bent with greater boost achieved a higher burst pressure and consequently a greater CFE which increased …

    waterloo Repository record for Effect of Pre-Bending and Hydroforming Parameters on the Formability of Advanced High Strength Steel Tube (opens in a new tab)

  20. Feasibility And Characterization Of Leak-Tight Single-Track Thin Walls Produced By Laser Powder Bed Fusion In 316L Stainless Steel

    … their mechanical properties, including burst pressure and modulus of elasticity under pressure loads. A series of experimental iterations were conducted, varying laser power and laser speed to identify optimal conditions. The findings indicate that a narrow range of process parameters …

    calpoly Repository record for Feasibility And Characterization Of Leak-Tight Single-Track Thin Walls Produced By Laser Powder Bed Fusion In 316L Stainless Steel (opens in a new tab)

Page 1 of 4