Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"Bypass Duct"”.

  1. Extension of Particle Image Velocimetry to Full-Scale Turbofan Engine Bypass Duct Flows

    … engine design is increasing to the point that bypass duct geometry is becoming a significant contributor and could ultimately become a limiting factor. To investigate this, a number of methods are available to provide qualitative and quantitative analysis of the flow around the loss mechanisms …

    vt Repository record for Extension of Particle Image Velocimetry to Full-Scale Turbofan Engine Bypass Duct Flows (opens in a new tab)

  2. Acoustic optimisation and prediction of sound propagation in turbofan engine ducts

    … and<br/>radiation in turbofan engine intakes and bypass ducts, and the optimisation of noise attenuation<br/>by using acoustic liners. A commercial FE/IE code ACTRAN/TM is used<br/>within two shell programs; B-induct for bypass ducts and ANPRORAD for intake ducts.<br/><br/>An automated liner …

    soton Download PDF for Acoustic optimisation and prediction of sound propagation in turbofan engine ducts (opens in a new tab)

  3. Predicting fan noise propagation in aeroengine bypass ducts

    … of rearwards fan noise propagation within the bypass duct and its radiation into the far feld. Two recently developed models: B-induct and GXMunt, are exploited in application to real engine bypass ducts and their performance is evaluated. These methods are an improvement on current industry …

    soton Download PDF for Predicting fan noise propagation in aeroengine bypass ducts (opens in a new tab)

  4. Experimental simulation of atmospheric boundary layers and extreme gust events

    … boundary layers in the future.;The mechanical bypass duct gusting system of the AABL facility was used to generate various gusts within smooth and turbulent flows. An exploration of the gust-generating system led to the selection of types of gusts that were studied further. Analysis of the gust …

    iastate Repository record for Experimental simulation of atmospheric boundary layers and extreme gust events (opens in a new tab)

  5. Developing a three stream, mixed flow variable cycle engine in NPSS

    … fuel efficiency in mind, thus having very high bypass ratios, military engines need to uphold high specific thrust requirements in order to reach supersonic speeds as well as perform the manoeuvres sometimes necessary in a combat scenario. Modern military aircraft engines are therefore designed …

    chalmers Repository record for Developing a three stream, mixed flow variable cycle engine in NPSS (opens in a new tab)

  6. Wind tunnel testing of a nacelle bypass concept for a quiet supersonic aircraft

    … by Gulfstream Aerospace Corporation for the production of low-noise supersonic aircraft is the high-flow nacelle bypass concept in which an outer nacelle surface is used to encircle the asymmetric external engine protuberances of a traditional turbine engine. Although this bypass flow may reduce …

    uiuc Repository record for Wind tunnel testing of a nacelle bypass concept for a quiet supersonic aircraft (opens in a new tab)

  7. Time-domain DGM for turbofan exhaust noise predictions

    … tonal noise by noise-reducing chevrons on the bypass duct, considering a realistic geometry and flow-field.

    soton Download PDF for Time-domain DGM for turbofan exhaust noise predictions (opens in a new tab)

  8. Prediction and control of sound propagation in turbofan engine bypass ducts

    … the propagation of sound in acoustically lined ducts<br/>with flow. The motivation for this work is the requirement to predict the sound attenuation of<br/>acoustic liners in the bypass duct of modern turbofan aeroengines. The liners provide the most<br/>effective means with which to suppress …

    soton Download PDF for Prediction and control of sound propagation in turbofan engine bypass ducts (opens in a new tab)

  9. The use of variable engine geometry to improve the transient performance of a two-spool turbofan engine

    … air from the I.P. compressor delivery into the Bypass Duct of the engine, and finally altering the throat area of the Final Nozzle of the engine. The method of the Inter Component Volumes has been adopted for the performance prediction. The simulation prediction, for the 'Design' engine, has …

    glasgow Repository record for The use of variable engine geometry to improve the transient performance of a two-spool turbofan engine (opens in a new tab) Download PDF for The use of variable engine geometry to improve the transient performance of a two-spool turbofan engine (opens in a new tab)

  10. Low Bypass Ratio Variable Cycle Engine Concepts for High Speed Aircraft

    … are the most commonly used type. Low and medium bypass ratio engines are used predominantly in military aircraft and high bypass ratio ones are used in both civil and defence industries. Variable cycle engines (VCE) are advanced turbofan engines with multiple bypass ducts making them more …

    chalmers Repository record for Low Bypass Ratio Variable Cycle Engine Concepts for High Speed Aircraft (opens in a new tab)

  11. Flow Management in Heat Exchanger Installations for Intercooled Turbofan Engines

    Intercooled high bypass jet engines offer a means to raise the engine pressure ratio, reduce cooling flow temperatures, reduce engine core size and thus to reduce the specific fuel consumption and increase specific power of the jet engine. One of the major challenges of designing such an engine is …

    oxford Restricted access

  12. Effect of BLI-Type Inlet Distortion on Turbofan Engine Performance

    … distortion. Flow measurements at the AIP and the bypass nozzle exit plane provided information about the losses throughout the fan flow path. The presence of the distortion screen resulted in a 24% increase in mass-averaged entropy production along the entire fan flow path compared to the …

    vt Repository record for Effect of BLI-Type Inlet Distortion on Turbofan Engine Performance (opens in a new tab)

  13. Experimental Aerothermal Performance of Turbofan Bypass Flow Heat Exchangers

    … integrated at the inner wall of the secondary duct of a turbofan. The analysis of the interaction between the three-dimensional high velocity bypass flow and the heat exchangers is essential to evaluate and optimize the aero-thermodynamic performances, and to provide data for engine modeling. …

    upv Repository record for Experimental Aerothermal Performance of Turbofan Bypass Flow Heat Exchangers (opens in a new tab)

  14. The Predicted Performance of a Two-Spool Turbofan Engine in Rainstorms

    … development of gas turbines, with a brief introduction to the problem and definition of the contribution of the present work are exposed in this chapter. Chapter (11): This chapter deals with a briefing about previously studied ways of aircraft simulation and defining the appropriate methods …

    glasgow Download PDF for The Predicted Performance of a Two-Spool Turbofan Engine in Rainstorms (opens in a new tab)