Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 57 for “"Bypass flow"”.
-
Experimental Aerothermal Performance of Turbofan Bypass Flow Heat Exchangers
… between the three-dimensional high velocity bypass flow and the heat exchangers is essential to evaluate and optimize the aero-thermodynamic performances, and to provide data for engine modeling. The objectives of this research are the development of engine testing methods alternative to …
-
Experimental Investigation of Near-Wall Bypass Flow in Randomly Packed Pebble Beds
… with inherent voids, complicates the fluid flow within the reactor cores. Consequently, a thorough understanding of the flow dynamics and heat transfer phenomena in these systems is essential for their effective design and optimization. Previous experimental and numerical studies on flow …
-
A parc code approach for an ASTF exhaust header/test cell bypass flow analysis
… study was to evaluate the effect of a test cell bypass in operation upon the flow field of a jet engine test facility's exhaust header. A simplified analysis of the mixing of the flow was performed and a flow field simulation computer program, the Propulsion Ames Research Center (PARC) Code, is …
-
Preliminary Study of Bypass Flow in Prismatic Core of Very High Temperature Reactor Using Small-Scale Model
… one of the key features in the design of VHTR. Bypass flow in the prismatic core of VHTR is not a designed feature but it is inevitable due to the combination of several causes and considerably affects the core temperature. Although bypass flow has been studied extensively, the current status of …
-
CFD Analysis of Core Bypass Flow and Crossflow in the Prismatic Very High Temperature Gas-cooled Nuclear Reactor
… of the most crucial design considerations is the bypass flow and crossflow effect. The bypass flow occurs when the coolant flow into gaps between fuel blocks. These gaps are formed as a result of carbon expansion and shrinkage induced by radiations and manufacturing and installation errors. Hot …
-
Comparison of ultrasonic mixing with mechanical mixing in a continuous flow system
Mixing effects produced by ultrasonics in a flow process have been compared with the mixing obtained by a propeller stirrer at different speeds. These studies were carried out in an ultrasonic tank coupled with an ultrasonic generator. The generator produced sound waves at 90 kc./sec. at an average …
-
Improving performance of an energy efficient hydraulic circuit
… to control the pump swashplate (and hence flow rate) directly. The pump and DC motor were mathematically modeled and their parameters were experimentally identified. Based on the model and experimental results, a nonlinear PID controller was designed for the DC motor. By means of the DC …
-
Design of regulated velocity flow assurance device for petroleum industry
… research utilizes the concept of regulating the bypass flow velocity in order to maintain the pig velocity. The bypass flow is regulated by the control unit based on the feedback from the turbine flowmeter, which monitors the bypass flow. A motorized butterfly valve is used for actually …
-
Numerical Modeling for Characterization of Pebble Bed Reactor Bypass Flows
… contain cylindrical fuel compacts or coolant flow; alternatively, the pebble bed concept fuel is encapsulated by tennis-ball sized spherical graphite pebbles that move through the reactor bed under gravity. Encompassing both core designs are graphite reflector blocks that are distributed with …
-
An Effective Methodology for Thermal-Hydraulics Analysis of a VHTR Core and Fuel Elements
… largely due to the 3-D simulation of the helium flow in the 10 m long coolant channels in the reactor core and the need to examine the effects of helium bypass flow in the interstitial gaps between the core fuel elements. This research, performed at the UNM-ISNPS, developed an effective …
-
Improving the refrigeration and gas liquefaction performance of Gifford-McMahon and active magnetic regenerative cryocoolers: a study of flow maldistribution, unbalance, and asymmetry
… operation is required. Models to elucidate the flow characteristics of the regenerative heat exchangers of rotary AMRR and Gifford-McMahon (GM) systems using a commercially available computational fluid dynamics (CFD) software package are described. Theoretical results are presented to qualify …
-
Control of Herbicide Sprayers With Soil Organic Matter as an Input (Illinois)
… agricultural field sprayers was designed using bypass nozzles to minimize changes in spray pattern and drop size. Sprayer travel speed and the organic matter in the soil under the sprayer were the design inputs. Step, impulse and sinusoidal demands on the system were made and the resulting flows …
-
Simulation of a Comprehensive Heat Recovery Steam Generator
… were modeled at superheater exits in the HP bypass flow path. Steam turbine and bypass flow paths were modeled, including their respective valves, enabling the simulation of transient conditions. During testing, simultaneous operation of both valves was used to simulate an HRSG and steam …
-
Wake Characterization of a Cross-Flow Turbine
A cross-flow turbine wake is analyzed to better understand how these turbines affect the flow field in their immediate vicinity. Mean velocity, turbulence intensity, coherent turbulent kinetic energy, and Reynolds shear stresses are used to identify regions of turbulence and mixing. The shear layer …
-
Influence of denitrification bioreactor design on cost, performance, and potential for pollution swapping
… at three HRTs (2-, 8-, and 16-h) designed with bypass flow or a low probability of bypass flow. From this analysis, we observed a span of unit costs of bioreactor operation ranging from $0.74 kg-1 NO3-N removed (large-scale bioreactor with low probability of bypass flow at a 16 h HRT) to $60.13 …
-
Flow and pressure drop on the shellside of cylindrical heat exchangers
… work presents pressure distributions and fluid flow patterns on the shellside of a cylindrical shell-and-tube heat exchanger. The apparatus used was constructed from glass enabling direct observation of the flow using a dye release technique and had ten traversable pressure instrumented tubes …
-
A detailed chemistry solver on adaptive curvilinear meshes and its application to rotating detonation simulations
… handling detailed chemistry and boundary flows.<br/>In this work, a three-dimensional solver is developed based on the Adaptive Mesh Refinement in Object-oriented C++ (AMROC) framework. The adaptive mesh refinement technique enables dynamic mesh refinement based on a user-defined …
-
Experimental investigation of an ejector as a refrigerant expansion engine
… in the resulting ejector cycle was a hot gas bypass arrangement which was found to effectively control the condenser and evaporator flowrate. Hot gas bypass was used instead of a throttling valve, which would have undermined the benefit of the ejector. Experiments were conducted by running the …
-
Fundamentals of Operation of the Induced Bed Reactor (IBR) Anaerobic Digester
… model, incorporating elements of dead zone and bypass flow, appears to be the most appropriate representation of the data. Mixing is likely due to a combination of energy inputs from thermal gradients induced by heat flux through the reactors and reactor and shear rates induced by gas evolution …
-
An Evaluation of Accelerated Drying of Reclamation Soil Covers by Convective Airflow
… convective drying of the cover as a result of airflow from the atmosphere into the underlying coke. This airflow could be the result of density gradients across the cover system as a result of temperature contrasts between the atmosphere and the coke or could be the result of oxygen consumption …
Page 1 of 3