Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"C/A code"”.

  1. Cross correlation mitigation for C/A code GPS receivers

    … GPS signals. Unfortunately, the 1023 chip Gold code sequences used for the GPS C/A spreading codes limit the dynamic range of a typical GPS receiver such that the power difference between the strongest and weakest GPS signal is limited to less than 21 dB. When this condition is not satisfied, …

    unsw Repository record for Cross correlation mitigation for C/A code GPS receivers (opens in a new tab)

  2. Multicarrier Transmission As an Alternative for GPS C/A Code : Simulation and Verification

    This thesis mainly focuses on using multi-carrier code as an alternative for the C/A code currently transmitted in GPS System. As a substitution, the most critical concern that we have is the Doppler shift, which will Cause the overlap of the sub-carriers transmitted from di erent satellites. The …

    calgary Repository record for Multicarrier Transmission As an Alternative for GPS C/A Code : Simulation and Verification (opens in a new tab)

  3. Signal Acquisition and Tracking for a Software Gps Receiver

    … on the acquisition and tracking of L1 band C/A code GPS signals used by most civilian applications. The purpose of this thesis is to develop the acquisition and tracking algorithms to extract the navigation data bits from the raw GPS signals. The navigation data bits provide all the necessary …

    vt Repository record for Signal Acquisition and Tracking for a Software Gps Receiver (opens in a new tab)

  4. Behavioral VHDL Implementation of Coherent Digital GPS Signal Receiver

    … developed. The scope of this work is the GPS C/A code on the L1 carrier. The digital signal processing back-end in a GPS receiver is modelled in this work. VHDL modeling of various communiation sub-blocks, detection and demodulation schemes is done. A coherent demodulation of the GPS signals is …

    usf Repository record for Behavioral VHDL Implementation of Coherent Digital GPS Signal Receiver (opens in a new tab)

  5. Emulátor signálu navigačního systému GPS

    Práce se zabývá principem satelitní navigace. Přibližuje problematiku určení polohy a nadmořské výšky na povrchu Země. Obsahuje rozbor navigačních zpráv a způsob zpracování navigačních signálů v GPS přijímačích. Dále jsou popsány návrh a realizace emulátoru navigačního signálu systému GPS v …

    brno-tech Repository record for Emulátor signálu navigačního systému GPS (opens in a new tab)

  6. GPS L2 C signal survey and the development of the emergent MATLAB L2 C (EMAL2) receiver

    … are two new chip-by-chip interleaved spreading code sequences, Civilian Moderate (CM) and Civilian Long (CL), and a new, higher resolution navigation message, CNAV. The two new C codes are longer than the legacy C/A code and feature a data less pilot signal (CL) for improved tracking performance …

    texas Repository record for GPS L2 C signal survey and the development of the emergent MATLAB L2 C (EMAL2) receiver (opens in a new tab)

  7. Large scale antenna array for GPS bistatic radar

    … obtains the Doppler frequency component and C/A code pattern from each satellite, array calibration that realigns the inter-element phase errors and orientation of phased-array receiver using the GPS system, and direct-path signal interference cancellation. The GPS bistatic radar target detection …

    adelaide Repository record for Large scale antenna array for GPS bistatic radar (opens in a new tab)

  8. Development and Testing of A Space-borne GPS Signal Strength Sensor

    … strength in the thesis. The coarse/acquisition code (C/A-code) correlation is applied and the raw correlation data from a GPS correlator chip is obtained to calculate the signal strength. The gain variation of the automatic gain control (AGC) in the GPS signal link is considered, and a model is …

    vt Repository record for Development and Testing of A Space-borne GPS Signal Strength Sensor (opens in a new tab)

  9. A low-cost remote sensing system for agricultural applications

    … is the inability to effectively receive the P-Code wavelength, which is needed to gain the best accuracy when undertaking differential GPS processing. Pairing the carrier phase L1 with the pseudorange C/A-Code received, in order to determine the image coordinates by the differential technique, …

    aston Download PDF for A low-cost remote sensing system for agricultural applications (opens in a new tab)

  10. Precise pseudoranges obtained from combining code and dual carrier measurements in Global Positioning System receivers

    … typically uses the coarse acquisition (C/A) code. The military GPS user has improved position accuracy within 6 meters using the dual GPS frequencies that carry the precise (P) code. The coarse resolution of a code measurement is about 1/10 of the smallest bit length of either code, which is …

    iastate Repository record for Precise pseudoranges obtained from combining code and dual carrier measurements in Global Positioning System receivers (opens in a new tab)

  11. Interface Ecologia-Comportamento&SIG: avaliações instrumentais, qualidade cartográfica e soluções técnicas para a geração de bases cartográficas aplicadas à primatologia

    … observed that the methods of positioning C/A code, autonomous, GPS, instant (optimistic scenario 2) and carrier phase (L1 and L2) GNSS (GPS and GLONASS), and multipath soluctions (Floodlight technology – Trimble®) with acquisition times of up to 15' (conservative scenario 2) have the same …

    brazil-ufrn Repository record for Interface Ecologia-Comportamento&SIG: avaliações instrumentais, qualidade cartográfica e soluções técnicas para a geração de bases cartográficas aplicadas à primatologia (opens in a new tab)

  12. Detection, characterization and mitigation of interference in receivers for global navigation satellite systems

    … and the commonality between the GPS C/A code and Galileo signal as a basis to build up a common term for satellite availability, the probability of satellite availability in the presence of CW interference is defined and for the two currently available satellite navigation systems (GPS L1 …

    unsw Repository record for Detection, characterization and mitigation of interference in receivers for global navigation satellite systems (opens in a new tab)

  13. Implementation of Real-Time Software Receiver for Gps or Glonass L1 Signals

    A 12 channel real-time GPS L1 C/A-code software receiver has been implemented on a Desktop with 1.84GHz Intel CPU. The software receiver has the capability to acquire new satellites coming in, keep tracking of satellites in view and give a user solution accuracy of 30 meters. This study also …

    vt Repository record for Implementation of Real-Time Software Receiver for Gps or Glonass L1 Signals (opens in a new tab)

  14. GNSS Reflectometry for land surface monitoring and buried object detection

    … extracted by means of reflected signal strength, code delay, carrier phase delay, interference with direct GNSS signals and so on. Possible applications cover soil moisture retrieval, ice topography and thickness detection, snow depth estimation, vegetation coverage, sea state monitoring such as …

    poli-torino Repository record for GNSS Reflectometry for land surface monitoring and buried object detection (opens in a new tab)