Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 21 for “"CAD Modelling"”.
-
Design of locally actuated surgical gripper for minimal access robotic surgery applications
… development of design specification, device CAD modelling, mechanical and thermal analysis of the design, using Autodesk® engineering software and physical prototype manufacturing.
-
A CAD-based Integrated robotic disassembly sequence planning system
… in disassembly planning. Computer-aided design (CAD) is a well-established technology that has been used in digitalising assembly planning. However, few attempts at adopting CAD modelling and simulation ca
-
Automatic Mesh Repair and Optimization for Quality Mesh Generation
Imperfect CAD and data-scanned models are very common in model preparations and translations. Modification a model is often a necessity as a precursor to effective mesh generation. The novelty of the work presented in this thesis is the development of error identification and mesh-repair algorithms …
-
Weight reduction of a mount for a red dot sight through topology optimization and additive manufacturing: A study of red dot sight mount weight optimization
… and redesigned geometries were evaluated using CAD modelling and finite element analysis (FEA) in Abaqus. The simulations were used to study stress distribution, displacement, and load paths under recoil loading. Based on these results, the design was modified in SolidWorks through repeated …
-
Reverse engineering of a centrifugal turbine housing
… Neutron Computed Tomography (NCT) using CADKEY® V21 CAD modelling software at the SAFARI-1 nuclear reactor, NECSA, produced the most favourable 3-D NURBs model, which had a geometrical external accuracy of 95% and a volumetric internal accuracy of 94%. It was verified by comparing the …
-
Experimental and numerical investigation of the dynamic seat comfort in aircrafts.
… is undertaken with the initial work of CAD modelling. The simulated responses of the seat is partially matching with experimental results due to unknown parameters of the cushion and the connections of the aircraft seat that cannot be created in the CAD model due to unknown manufacturing …
-
Development of new attachment solution for patient transfer device
… The selected concept was further refined through CAD modelling, prototyping and ergonomic validation. The final design solution presents an alternative attachment solution intended to reduce handling problems while maintaining functionality and compatibility with Atle®. The project has shown how …
-
Technical Concept Study of an Electric Motorcycle Powertrain
… matrices as well as packaging models in CAD. The number of concepts was gradually reduced until three remained. It was concluded that a PMSM (Permanent Magnet Synchronous Machine) axial flux motor with a belt drive would fit the motorcycle best. Initial mechanical design and CAD modelling …
-
Cost benefit analysis of computer aided engineering implementation in bespoke engineering business.
… in which 3-Dimensional Computer Aided Design (CAD) modelling, dynamic simulation, Finite Element Analysis (FEA) and 3D CAD animation were applied to four company machines i.e. rubber die press, knuckle joint press, HME Coining press and clay extrusion machine to enhance both pre- and post order …
-
Establishing a 3D vascularized tri-culture model of the human airways via a digital light processing bioprinter
… LUMENX+ bioprinter into the model designed via CAD modelling software. Endothelial and epithelial cells were then seeded in lumens and on top of models. Perfusion experiments were set up to flow cell culture media through models and develop endothelialization. Models were structurally …
-
A real-time building HVAC model implemented as a tool for decision making in early stages of design
… (sketching) phase, the computer aided design (CAD) models and the location. To achieve these objectives, the Radiant Time Series (RTS) method was supplemented with real data from National Solar Radiation Database to enable a near-instantaneous annual HVAC load calculation to be integrated into …
-
Interior Design of an Urban Air Mobility Vehicle for Use in Prehospital Medical Emergencies - Developing a Concept to Complement Today’s Ambulance Vehicles
… and evaluated through 1:1 scale prototyping and CAD modelling. A final evaluation with paramedics in the full-scale prototype, followed by refinements, resulted in a user-centred interior solution. The primary project deliverables consist of a visualisation of the concept through a comprehensive …
-
Forging Preform Design Optimization for Structural Magnesium Components
… intensive, demands manual computer-aided design (CAD) modelling efforts, and places considerable reliance on engineering judgment and experience. In addition, the use of disjointed CAD and Finite Element Method (FEM) software makes it difficult to effectively incorporate FEM simulation responses …
-
Comparisons of the Aerodynamic Performance of two Silver Arrows from the Thirties
… a commercial CFD software. At the time, previous CAD data were not available for the cars, thus the models were created from scratch using two CMC models in scale 1:18. The thesis reports that the large time consumption required for the CAD modelling accompanied that the work of the simulations …
-
Accelerated, Collaborative & Extended BlobTree Modelling
BlobTree modelling has been used in several solid modelling packages to rapidly prototype models by making use of boolean and sketch-based modelling. Using these two techniques, a user can quickly create complex models as combinations of simple primitives and sketched objects. Because the BlobTree …
-
Integrating CAD Geometry and Scaled Boundary Finite Element Analysis
… (IGA) (Hughes et al., 2005). However, as the CAD model provides information only of the boundary, a 2D/3D stress analysis is still one major step away. This thesis presents a simple and efficient technique based on the combination of the scales boundary finite element method (SBFEM), automatic …
-
ARTIFICIAL MATERIAL 3D PRINTED TEACHING TOOLS FOR CARDIAC SURGICAL SKILLS TRAINING
… was divided into four different stages including CAD model development, tissue testing using surgical tools, aortic valve model manufacturing and model evaluation. First, the development of a patient-specific aortic valve model was carried out. The process involved heavily processing CT scanned …
-
Dynamic Data-Driven Simulation-Based Decision Support System for Medical Procedures
… trainees. For the system implementation phase, CAD modelling and CT segmentation have been used to develop 3D models of procedure-specific tools and anatomical structures, respectively. The CAD models have also been imported into the Physics-based simulation platform (Unity 3D), where the …
-
Simulace sestavování komponent ve virtuální realitě
Virtuální realita je vytvořena oklamáním mozku pomocí zobrazení jedné scenérie na dvourozměrném obraze, přičemž pro každé oko je generován obraz z mírně posunuté perspektivy. Tímto je vytvořena iluze trojrozměrného prostoru, se kterým je za pomocí vhodného software možné i simulovat interakci s …
-
Architektura, geometrie a výpočetní technika
… geometrických objektů, jejich modelování v CAD systémech a příklady jejich použití v praxi, v některých případech včetně způsobu realizace. Geometrické objekty jsou systematicky členěny od bodu přes křivky a plochy až po tělesa. Závěrem práce je návrh úpravy výuky geometrie na školách …
Page 1 of 2