Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 302 for “"CAD model"”.

  1. 3D CAD model figuríny člověka

    … práce se zabývá návrhem a realizací 3D CAD modelu figuríny člověka. Jsou zde popsány statistiky populace, tvorba tvaru a kinematiky modelu, a postup pro jeho nastavování do chtěných poloh.

    brno-tech Repository record for 3D CAD model figuríny člověka (opens in a new tab)

  2. CAD model robustness assessment and repair

    <p>The transfer of CAD data among different CAD systems or subsequent downstream analysis applications is critically important to the acceleration of the product development cycle. Since each vendor has its own proprietary native file format, this transfer of data among differing systems is …

    iastate Repository record for CAD model robustness assessment and repair (opens in a new tab)

  3. Immersive Virtual Reality Prototype for Evaluating 4D CAD Model

    Abstract 4D CAD model is a media used to communicate a construction project schedule to a wider amount of people in a project team. This model takes advantage of 3D geometry visualization to describe each construction activity. This 4D model can be potentially improved by adding within it an …

    washington Repository record for Immersive Virtual Reality Prototype for Evaluating 4D CAD Model (opens in a new tab)

  4. Autonomous Localization Of A Uav In A 3d Cad Model

    … building, given a prebuilt Computer Aided Design(CAD) model of the building. The proposed system is novel in that it leverages the support of machine learning and traditional computer vision techniques to provide a robust method of localizing and navigating a drone autonomously in indoor and GPS …

    nodak Repository record for Autonomous Localization Of A Uav In A 3d Cad Model (opens in a new tab)

  5. Development of a CAD Model Simplification Framework for Finite Element Analysis

    Analyzing complex 3D models using finite element analysis software requires suppressing features/parts that are not likely to influence the analysis results, but may significantly improve the computational performance both in terms of mesh size and mesh quality. The suppression step often depends …

    maryland Repository record for Development of a CAD Model Simplification Framework for Finite Element Analysis (opens in a new tab)

  6. A low cost Virtual Reality interface for CAD model manipulation and visualization

    … interface technology provided in modern CAD systems makes the use of two dimensional (2D) computer interfaces, e.g. a keyboard and mouse, to generate and interact with CAD models. In addition, all CAD systems project complex 3D CAD models on a two dimensional computer screen, and the …

    iastate Repository record for A low cost Virtual Reality interface for CAD model manipulation and visualization (opens in a new tab)

  7. Automated Recognition of 3D CAD Model Objects in Dense Laser Range Point Clouds

    … and Ranging (LADAR), 3D Computer-Aided-Design (CAD) modeling and registration technologies. The performance of this approach is investigated with a first set of experimental results obtained with real-life data. A second set of experiments then analyzes the feasibility of implementing, based on …

    waterloo Repository record for Automated Recognition of 3D CAD Model Objects in Dense Laser Range Point Clouds (opens in a new tab)

  8. Analysing the Effects of Incentives and Model Attributes on CAD Model Creation and Alteration

    Modern computer-aided design (CAD) systems have contributed significantly towards product development cycle time reduction and product quality improvement. To enhance the performance of CAD systems engineers must be able to create CAD models of conceptual designs quickly; at the same time CAD …

    tamu Repository record for Analysing the Effects of Incentives and Model Attributes on CAD Model Creation and Alteration (opens in a new tab)

  9. A CAD model for the axial inductive strip with finite thickness centered in homogeneous finline with wb=1

    This thesis describes a CAD compatible circuit model for an inductive strip with finite metal thickness centered in finline with wb=1. Scattering coefficients predicted by the circuit model are in good agreement with those predicted by an electromagnetic model based on Maxwell's equations. Filter …

    nps Repository record for A CAD model for the axial inductive strip with finite thickness centered in homogeneous finline with wb=1 (opens in a new tab)

  10. Automatic feature extraction from conventional CAD model to support feature-based design approach for the sheet metal stamping industries

    … continuing improvement in computer aided design (CAD) systems and improvements in computer aided manufacturing (CAM), the process planning activity has still not been completely integrated into the CAD/CAM cycle. Particularly in sheet metal stamping industries human interpretation of CAD data is …

    njit Repository record for Automatic feature extraction from conventional CAD model to support feature-based design approach for the sheet metal stamping industries (opens in a new tab)

  11. CAD model extraction of PCB signal discontinuity using a circuit extraction approach based on mixed-potential integral equation formulation

    … signal integrity issue. Efficient and accurate models for via transitions are necessary to analyze high bit-rate digital circuit system. The circuit extraction approach based on a mixed-potential integral equation formulation (CEMPIE) is an extension of the Partial Element Equivalent Circuit …

    must-thes Repository record for CAD model extraction of PCB signal discontinuity using a circuit extraction approach based on mixed-potential integral equation formulation (opens in a new tab)

  12. Registration using Graphics Processor Unit

    … by which sampled point clouds are aligned with a CAD model by a 4X4 homogeneous transformation (e.g., rotation and translation). This alignment permits validation of the produced artifact's geometry. State-of-the-art metrology systems are now capable of generating thousands, if not millions, of …

    clemson Repository record for Registration using Graphics Processor Unit (opens in a new tab)

  13. Boundary-based approach for the extraction of form features from Computer-Aided-Design (CAD) models

    Feature models represent parts in terms of high level, functionally significant entities such as holes, slots or pockets. Features can provide an additional layer of information in advanced Computer-Aided Design (CAD) systems to make them more useful for design and to integrate design with down …

    iastate Repository record for Boundary-based approach for the extraction of form features from Computer-Aided-Design (CAD) models (opens in a new tab)

  14. Generation Of An Accurate, Metric Spatial Database Of A Large Multi Storied Building

    … during construction. The algorithm uses the 3D CAD model of the building and the video of the structure captured by an Unmanned Aircraft System (UAS). The spatial database is then used to perform several inspection procedures such as, metric data analysis, spatial query for images, visualization …

    nodak Repository record for Generation Of An Accurate, Metric Spatial Database Of A Large Multi Storied Building (opens in a new tab)

  15. Čtyřválcový zážehový motor s vypínáním válců

    … Následně je dle předloženého výkresu navržen 3D CAD model. Ten je převeden do náhradní torzní soustavy, ze které vycházejí výpočty vlastních a vynucených torzních kmitů. Navržený 3D CAD model je poté prostorově vysíťován v MKP softwaru Ansys Workbench a upraven (okrajové podmínky, atd.) v MKP …

    brno-tech Repository record for Čtyřválcový zážehový motor s vypínáním válců (opens in a new tab)

  16. Feature-based exploitation of multidimensional radar signatures

    … ray technique and a computer-aided design (CAD) model of the target. The feature extraction technique groups scattering centers across multiple angles that pertain to the same scattering mechanism. Using a nearest neighbor clustering algorithm, this association is carried-out in a …

    texas Repository record for Feature-based exploitation of multidimensional radar signatures (opens in a new tab)

Page 1 of 16