Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"CAFM"”.
-
CAFM Studies of Epitaxial Lateral Overgrowth GaN Films
… atomic force microscopy (AFM) and conductiveAFM (CAFM) to study defect sites on GaN films. In particular, these defect sites demonstrate current leakage under reverse-bias conditions that are detrimental to device fabrication. Two growth techniques that were used to improve this leakage behavior …
-
AFM, CAFM, and EFM Studies of the GaN System
… measured using the techniques of Conductive AFM (CAFM) and Surface Potential Electric Force Microscopy (SPEFM), respectively. CAFM studies of GaN surfaces have revealed that prismatic planes around islands and pits on surfaces can lead to enhanced conductivity, which may be related to leakage …
-
Anticedents [i.e. antecedents] of intention to adopt web-based computer aided facility management (CAFM) by facility managers
Thesis (Ph. D.)--Michigan State University. Department of Human Environment and Design, 2007
-
Charakterizace 1-D nanostruktur metodami SPM
… sil (AFM), vodivostní mikroskopií AFM (CAFM) a mikroskopií blízkého pole (SNOM). Uhlíkové nanotrubice byly analyzovány mikroskopiemi STM, AFM a CAFM. V navržené aparatuře byly připraveny stříbrné nanodráty depozicí do polykarbonátových membrán, analyzovány z hlediska geometrie (AFM), …
-
A Study on the Nature of Anomalous Current Conduction in Gallium Nitride
… measurements on NiIAu Schottky diodes and CAFM. Current-voltage (IV) mechanisms will identify conduction mechanisms on diodes, and CAFM measurements will investigate the microstructure of conduction in GaN thin films. With CAFM, enhanced conduction has been shown to decorate some extended …
-
Příprava funkčních nanostruktur a jejich analýza povrchově citlivými technikami
… sondové mikroskopie (KPFM) a vodivostního AFM (CAFM), pro elektrickou charakterizaci nanomateriálů. Nejvýznamnější část práce se věnuje charakterizaci elektrických vlastností dislokací v AlGaN/GaN. Hlavní dosažené výsledky jsou následující: CAFM měření dislokací v GaN a AlGaN bylo optimalizováno …
-
Analýza dislokací v GaN pomocí mikroskopických metod
… datech z vodivostní mikroskopie atomárních sil (CAFM). Byly provedeny korelativní ECCI-CAFM experimenty na průmyslových AlGaN/GaN epivrstvách, pro účely CAFM měření pak byla vyvinuta šetrná metoda pro dekontaminaci povrchu vzorků. Předběžná statistická analýza souboru 12~000 dislokací naznačuje …
-
STUDY OF SEQUENTIALLY SPUTTERED Co-HfO2 GRANULAR FILMS
… based on the conductive atomic force microscopy (CAFM) was developed to image the nanostructure of the Co-HfO2 GFs. A control sample using patterned and well-defined Py nanostructures was studied to test the imaging capability of CAFM and build a model. Tomography and 3D image reconstruction of …
-
Operation and Maintenance Support Information (OMSI) creation, management, and repurposing with XML
… of a Computer-Aided Facility Management (CAFM) system allows for early identification of O&M requirements, an improved planning capability for new facilities, and more efficient economies of scale. In addition to PWD manpower savings, OMSI-CAFM integration will also allow a revolution in …
-
SINGLE IMPURITY TUNNELING CURRENT AND PHOTOCURRENT MEASUREMENT IN 2D MATERIAL BY CONDUCTIVE ATOMIC FORCE MICROSCOPY
… Conductive atomic force microscopy (cAFM) is employed to create a nanoscopic molecular junctions and probe its electrical and opto-electrical properties. The research findings are broadly divided into three parts. First, the capability of cAFM to detect single atomic impurities in …
-
Thermoelectric properties of ultra-thin film formed by molecular self assembly and Langmuir-Blodgett deposition
… materials, Conductive Atomic Force Microscopy (CAFM) o ers high sensitivity to the nanoscale electric and thermoelectric properties and a spatial resolution of few nm. In addition, AFM-based techniques provide outstanding control of the normal force applied by the nanometric probe on the …
-
Nanoscale electrical characterization of semiconductor and semiconductor-oxide junctions by scanning probe microscopy
… (SCM), and conductive atomic force microscopy (CAFM)---in combination with quantitative electrostatic modeling, to characterize the nanoscale electronic structure of GaN and GaAs pn junctions and of SrTiO₃/Si heterostructures. Cross-sectional SKPM and SCM measurements of GaN pn junctions profile …
-
Memristive Dynamics of Ag-based Nanostructures for Neuromorphic Systems
In this thesis, an unconventional cAFM approach was developed to enhance basic research on nanoscale memristive systems. This approach intends to integrate the memristive system at the apex region of a cantilever, to achieve an efficient nanoscale localization of the memristive action. Two …
-
Resistive switching properties of p-type cobalt oxide thin films and devices
… measurement, conductive atomic force microscopy (CAFM) and Kelvin probe force microscopy (KPFM) methods, trying to reveal the RS mechanism in the CoO material system and to find new material structures as good RRAM candidates. RS performance and mechanism in the OMBE fabricated CoO thin film were …
-
Facility management
… bakalářská práce se zabývá návrhem implementace CAFM systému ve společnosti Bosch Rexroth pro digitalizaci technické správy nemovitostí . Na základě procesní analýzy pomocí snímků dne a rozhovorů jsou kvantifikovány administrativní neefektivity a definována provozní i legislativní rizika . …
-
Facility management staveb
… část práce je proces implementace dvou CAFM systémů a jejich vzájemné porovnání v prostředí Vysokého učení technického v Brně.
-
Optimalizace a analýza mikrostruktury baterií s pevným elektrolytem
… přenosu. Vodivstní mikroskopie atomárních sil (CAFM) odhaluje vysokou elektronovou vodivost na hranicích částic CAM, což je způsobeno difúzí prvků během cyklování. Dále je pozorován pokles elektronické vodivosti uvnitř částic CAM. Kelvinova sondová mikroskopie (KPFM) ve spojení s energiově …
-
Investigation of Surface Properties for Ga- and N-polar GaN using Scanning Probe Microscopy Techniques
… with rms values of only 0.4 nm. Conducting AFM (CAFM) indicated unexpected insulating behavior for N-polar GaN bulk samples, but showed expected forward and reverse-bias conduction for periodically patterned GaN samples. Using scanning Kelvin probe microscopy, these same patterned samples …
-
Návrh procesu facility managementu u polyfunkční budovy
… nebo plánují uplatňovat. Jedná se o metody BIM, CAFM a také o minoritní doplňkové trendy. V druhé části s teoretickým zaměřením je popsána polyfunkční budova, rozebrán životní cyklus staveb a jejich životnost. V samotném závěru nechybí ani popis pasportizace budov, která je nedílnou součástí pro …
-
Investigations of Hybrid Perovskite Thin Films and Interfacing TiO2 Electrode Surfaces: Chemical Origins of Nanoscale Structural and Electrical Properties for Photovoltaic Applications
… By combining conductive atomic force microscopy (cAFM), to measure local current-voltage properties across the TiO2 surface, with X-ray photo-electron spectroscopy (XPS), to track near-surface composition and energetics, we examine how two common TiO2 surface treatments for PV contact formation …
Page 1 of 3