Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"CANMET"”.
-
Determination of silver using cyclic epithermal neutron activation analysis
… activation analysis (CENAA). Various NIST and CANMET certified materials were analyzed by the system. Experiment results showed 110Ag as one of the isotopes favored by the system. Thus, the system was put into practical application for identifying silver concentration in the Arctic atmospheres …
-
Experimental and modeling study of Pitch Pyrolysis kinetics
Kinetics of thermal pyrolysis of both CANMET and Syncrude pitches from heavy oil upgrading have been studied with Thermogravimetric Analysis (TGA), and with Pyroprobe-Gas Chromatography (Pyroprobe-GC). In the latter technique samples are pyrolyzed at high heating rates and products analyzed with …
-
Investigating the High-Temperature (100 °C - 200 °C) Dissolution and Sulfidation of As₂O₃ Stored at the Giant Mine, NWT, Canada
… that time to equilibrium is > 24 hours at 60 °C (CANMET, 2000). Reaction of Giant-Mine material in water at elevated temperatures (140 °C - 200 °C) for 10 to 30 minutes consistently resulted in dissolution of approximately 80 wt. % of the initial solid-phase As concentrations, representing almost …
-
Coal blending model : theory and application of the model
… of existing computer programs called the CANMET Coal Data Manipulation Programs, and after some modifications, the Coal Blending Model was produced. The Coal Plant Simulation program, which is included in the CANMET program, is the heart of the model, while the Coal Blending coefficient …
-
NO[sub x] and N2O emissions from circulating fluidized bed combustion
… fuels: Conoco coke, Poplar River lignite, CANMET pitch and Mt. Klappan anthracite, with the volatile content ranging from 6.5% (Mt. Klappan anthracite) to 67.7% (CANMET pitch) and the fuel nitrogen content varying from 0.9 wt % (Mt. Klappan anthracite and Poplar River lignite) to 1.9% …
-
Using lithium compounds as an admixture in new concrete and as a post-treatment for existing concrete affected by alkali-silica reaction
… conducted jointly at the University of Texas, CANMET (Ottawa), and the University of New Brunswick, evidence of major differences between the amounts of lithium nitrate suggested by each test method became apparent. This thesis seeks to identify these differences as well as describes the first …
-
X-ray microscopy of hydrocarbon-clay interactions
… microscopy results from our collaborators at CANMET Energy Technology Centre in Devon, Alberta.
-
Sorbent attrition in fluidized carbon dioxide capture systems
… of British Columbia, the University of Ottawa/CANMET, and Laval University, respectively. The attrition testing equipment was an air-jet apparatus based on the ASTM D5757 standard, with several modifications to improve testing capabilities. The experiments were conducted under varying attrition …
-
Opportunities for forest-based biorefining to reverse decline in Canada’s forest products sector
… - the I-BIOREF application developed by CANMET Energy - is used. Identified measures are evaluated against three important criteria: required data be available, collection be automated, and the measure be acceptable to key stakeholders. Three measures, including employment, employment …
-
An investigation into using artificial neural networks for empirical design in the mining industry
… to assist in ELOS prediction. A joint UBC - Canmet research project ( Clarke, 1997 ) recorded ELOS from 75 open stopes while recording 23 relevant input factors for each stope. This neural net analysis was conducted to assist in determining the most relevant factors. Rock quality, …
-
Feasibility of Producing Clad Twin Roll Cast (TRC) AZ31
… a process window was created (based on the CANMET facility) to illustrate the feasibility of casting and cladding during TRC. This window is beneficial for future experimentation and understanding the effects of these casting parameters.
-
Hard rock pillar strength estimation an applied empirical approach
… Centre for Mineral and Energy Technology (CANMET). 147 additional case histories were acquired from six documented hard rock pillar case studies in the literature, resulting in a combined database of 178 case histories. The combined database is comprised mainly of massive sulphide pillars …
-
Caractérisation large bande d'un canal radio dans une mine souterraine à une fréquence porteuse de 60 GHZ
… sur une campagne de mesures dans la mine CANMET à Abitibi Témiscamingue, au Nord du Québec, Canada, cette étude est une caractérisation du canal minier souterrain à 60 GHz. Même si dans la majorité des cas réels de communications sans fil, les antennes ne se voient pas nécessairement, …
-
Factors affecting the mechanical properties of blast furnace coke
… were supplied by Energy, Mines and Resources (CANMET) in Ottawa. A warf coke batch was also provided as a control sample. Several hundred core-drilled specimens (≃1.3cm diameter and 1.3cm length) were produced from the seven coke batches. The bulk density of each cylindrical coke specimen was …
-
Deriving Gas Transport Properties of Microporous Silica Membranes from First Principles and Simulating Separation of Multi-Component Systems in Different Flow Configurations
… (kindly provided by Natural Resources Canada, CANMET Energy Technology Center (CETC) laboratory in Ottawa) by minimizing the error of the calculated permeance ratios with respect to the experimental values. The results indicate that, depending on how the objective function is defined, more than …
-
Fluidized Bed Combustion with Integrated Carbon Dioxide Capture
… cycle process has been demonstrated using the CANMET 75 kWth pilot-scale dual fluidized bed facility and more than 50 hrs operating experience in total has been accumulated. Havelock limestone from eastern Canada was used as the CO2 sorbent, while a synthesis gas mixture of air and CO2 (15%) …
-
The prediction of the evolution of microstructure during hot rolling of steel strips
… simulation of the industrial hot rolling mill on CANMET's pilot mill. To verify the heat-transfer model, industrial trials were conducted in which the surface temperature of the strip was monitored with pyrometers at several locations. To obtain an accurate prediction of the roll forces in the …
-
Thermomechanical phenomena during rough rolling of steel slab
… effect, pilot mill tests have been conducted at CANMET and UBC. In these tests, the surface and the interior temperatures of specimens during rolling have been recorded using a data acquisition system. The corresponding heat transfer coefficients in the roll bite have been back-calculated by a …
-
Étude et modélisation d'une pompe à chaleur géothermique à expansion directe au CO2
… générés par plusieurs tests realizes à CANMET Énergie à Varennes ont permis de valider ce modèle. Deux études ont été réalisées par la suite : une étude paramétrique sur l’échangeur de chaleur intermédiaire ainsi qu’une étude sur un nouveau algorithme de contrôle de la pression optimale …
-
Design and Development of an Intelligent Energy Controller for Home Energy Saving in Heating/Cooling System
… energy analysis and rating software developed by CanmetENERGY’s Housing, Buildings, Communities and Simulation (HBCS) group. We have calculated how much energy a home modelled will use under emulated conditions. The results showed that the implementation of the proposed energy controller algorithm …
Page 1 of 2