Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 155 for “"CAR model"”.

  1. Computational Aerodynamics Study of Ahmed Body Car Model

    … such as wind tunnels and climate tunnels. The models are costly and at the beginning of a specific development several design alternatives have to pursued. Computational Fluid Dynamics (CFD) serves as a much cheaper tool to meet current development needs. It can closely simulate flow, and thus …

    odu Repository record for Computational Aerodynamics Study of Ahmed Body Car Model (opens in a new tab)

  2. Investigation of a non-linear suspension in a quarter car model

    This thesis presents the study of a quarter car model which consists of a two-degree-of-freedom (2 DOF) with a linear spring and a nonlinear spring configuration. In this thesis, the use of non-linear vibration attachments is briefly explained, and a survey of the research done in this area is also …

    aston Download PDF for Investigation of a non-linear suspension in a quarter car model (opens in a new tab)

  3. Large Eddy Simulation of a Simplifed Car Model Exposed to an Unsteady Harmonic Crosswind

    … is used to simulate a case where a simplified model of a car is oscillating on its vertical axis inside a wind tunnel. This is done in order to represent incoming oscillating wind. This air flow reaches the model with an angle varying between 10 and 30 degrees. The simulation is performed for …

    chalmers Repository record for Large Eddy Simulation of a Simplifed Car Model Exposed to an Unsteady Harmonic Crosswind (opens in a new tab)

  4. Design of active suspension control based upon use of tubular linear motor and quarter-car model

    The design, fabrication, and testing of a quarter-car facility coupled with various control algorithms are presented in this thesis. An experimental linear tubular motor, capable of producing a 52-N force, provides control actuation to the model. Controllers consisting of two designs were …

    tamu Repository record for Design of active suspension control based upon use of tubular linear motor and quarter-car model (opens in a new tab)

  5. An Experimental Study of the Flow Around the Front Wheels of a 20% Scale Car Model in Moving Ground Conditions

    … the conceptual design of a sting that should carry a car model when using moving ground. The second part contains a study of the flow around a wheel in a wheel house cavity in moving and stationary ground condition. The aim of the study was to try to give further explanation to the change in …

    chalmers Repository record for An Experimental Study of the Flow Around the Front Wheels of a 20% Scale Car Model in Moving Ground Conditions (opens in a new tab)

  6. Bayesian modelling of the spatial distribution of road accidents

    … research aims to develop Hierarchical Bayesian models for road accident counts that take account of the spatial dependency in the neighbouring areas or sites. The Poisson log-linear model is extended by introducing a second level of random variation that includes a conditional autoregressive …

    middlesex Download PDF for Bayesian modelling of the spatial distribution of road accidents (opens in a new tab)

  7. On the Control Aspects of Semiactive Suspensions for Automobile Applications

    … of a two-degree-of freedom quarter-car model, using passive and semi-active dampers, along with a seven-degree-of-freedom full vehicle model. The behaviors of the semi-actively suspended vehicles have been evaluated using skyhook, groundhook, and hybrid control policies, and compared …

    vt Repository record for On the Control Aspects of Semiactive Suspensions for Automobile Applications (opens in a new tab)

  8. Model development, validation and nonlinear control of pneumatic suspensions

    … to improve the ride comfort and performance of car suspensions. For this purpose, dimensional analysis was applied to the half car model of the Honda Civic. The conventional suspension of the Honda Civic was replaced by a pneumatic suspension. Its scaled half car model was designed and built. …

    ottawa-retro Repository record for Model development, validation and nonlinear control of pneumatic suspensions (opens in a new tab)

  9. Design of an Automobile Accelerator/ Brake Pedal Robot for Advanced Driver Assistance Systems

    … steady state error. A simplified actuator and car model are developed. A PID controller and a Fuzzy controller were designed, simulated, and compared in their ability to control the developed car model. Both controllers were then implemented and tested in two different cars.

    iupui Repository record for Design of an Automobile Accelerator/ Brake Pedal Robot for Advanced Driver Assistance Systems (opens in a new tab)

  10. Finite element analysis and passive vibration control of the Timoshenko beam traversed by a moving vehicle using an optimized tuned mass damper

    … bridge-vehicle system in which, the bridge is modeled as a Timoshenko beam and the vehicle is considered as a half car model has been investigated using the finite element method. Responses of the beam and the vehicle model have been obtained and then validated with those reported in …

    concordia Download PDF for Finite element analysis and passive vibration control of the Timoshenko beam traversed by a moving vehicle using an optimized tuned mass damper (opens in a new tab)

  11. Study of Vehicle Dynamics with Planar Suspension Systems (PSS)

    … this investigation, various number of vehicle models are developed considering the relative longitudinal motions of wheels with respect to the chassis. A 4-DOF quarter-car model is used to conduct a preliminary study of the ride quality, and a pitch plane half-car model is employed to …

    waterloo Repository record for Study of Vehicle Dynamics with Planar Suspension Systems (PSS) (opens in a new tab)

  12. Full vehicle dynamics model of a formula SAE racecar using ADAMS/Car

    … dynamic behavior of the student-designed racecars. The objective of this study is to fulfill this need by creating a full vehicle ADAMS/Car model incorporating an empirical tire-road force model and validating the longitudinal performance of the model by using vehicle responses recorded at the …

    tamu Repository record for Full vehicle dynamics model of a formula SAE racecar using ADAMS/Car (opens in a new tab)

  13. Bayesian multivariate spatial models and their applications

    Univariate hierarchical Bayes models are being vigorously researched for use in disease mapping, engineering, geology, and ecology. This dissertation shows how the models can also be used to build modelbased risk maps for areabased roadway traffic crashes. Countylevel vehicle crash records and …

    tamu Repository record for Bayesian multivariate spatial models and their applications (opens in a new tab)

  14. Conditional autoregressive models : implications for inference

    Conditional autoregressive models (CAR) have been used to account for potential violations of independence in error terms which are common in ecological data. In this simulation the performance of two CAR models, intrinsic which assumes full dependence and Leroux which estimates the degree of …

    texas Repository record for Conditional autoregressive models : implications for inference (opens in a new tab)

  15. Design optimization of aerodynamic drag at the rear of generic passenger cars using nurbs representation

    The rear geometry of a passenger car has the most significant influence on its aerodynamic characteristics. This thesis studied aerodynamic shape optimization of the rear geometry of passenger cars. The Non-uniform rational B-spline (NURBS) curve was used to represent the rear body of a generic …

    uoit Repository record for Design optimization of aerodynamic drag at the rear of generic passenger cars using nurbs representation (opens in a new tab)

  16. Model studies to determine a winged gem configuration for the Curtis-Wright air car

    This report deals with an investigation of model tests to determine the most desirable winged GEM configuration to which the Curtiss-Wright Air Car can be modified. Tests on a modified C-W Air Car model showed that the addition of wings and nose and tail fairings had negligible effect on hover …

    nps Repository record for Model studies to determine a winged gem configuration for the Curtis-Wright air car (opens in a new tab)

  17. Marginally modeling misaligned regions and handling masked failure causes with imprecision

    … units are available. We wish to simultaneously model both 1) the spatial relations within each variable, and 2) the relations between variables. Unlike other approaches to constructing multivariate generalizations of the CAR model, we require that each marginal distribution is an ordinary CAR …

    missouri Repository record for Marginally modeling misaligned regions and handling masked failure causes with imprecision (opens in a new tab)

  18. Pseudo-continuous spatial and spatio-temporal modelling of disease risk

    … on areal unit data. Conditional autoregressive (CAR) models are the most common modelling approach for disease data at the areal unit level. Such approaches assume constant disease risk within each areal unit, which may not be realistic. Therefore this study aims to address this problem by …

    glasgow Repository record for Pseudo-continuous spatial and spatio-temporal modelling of disease risk (opens in a new tab) Download PDF for Pseudo-continuous spatial and spatio-temporal modelling of disease risk (opens in a new tab)

Page 1 of 8