Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 164 for “"CEMENT CONTENT"”.

  1. Effect of Cement Content on Concrete Performance

    … all the traditional concrete materials, portland cement has the greatest impact on mixture cost and the environment. Cement is in many ways the glue holding concrete together (Weiss, 1999), and as such, it plays a major role in fresh and hardened concrete properties. Without the proper range of …

    arkansas Repository record for Effect of Cement Content on Concrete Performance (opens in a new tab)

  2. Optimizing concrete mixtures with minimum cement content for performance and sustainability

    … of this research is to investigate the minimum cement content required with an appropriate water-to-cement ratio (w/c) to meet given workability, strength, and durability requirements in a concrete pavement; and to reduce carbon dioxide emissions, energy consumption, and costs.</p> <p>An …

    iastate Repository record for Optimizing concrete mixtures with minimum cement content for performance and sustainability (opens in a new tab)

  3. Role of cement content in determining resistance of concrete to reinforcement corrosion

    … literature shows that at fixed w/c ratio, cement reduction is not detrimental to fresh and hardened concrete properties and may improve performance in some cases. However, cement content variations (in some cases) are relatively small and do not cover an adequate range around the specified …

    dundee Repository record for Role of cement content in determining resistance of concrete to reinforcement corrosion (opens in a new tab) Download PDF for Role of cement content in determining resistance of concrete to reinforcement corrosion (opens in a new tab)

  4. Investigation of Mobility Parameters in Rheological Behaviour of Low Cement Content Mortars

    … mixtures, more specifically, the production of cement. The combination of using advanced mixdesign techniques (e.g., particle packing models -PPM) and more sustainable ingredients poses as a promising alternative to overcome concrete environmental impact. However, there is a lack of studies …

    ottawa-retro Repository record for Investigation of Mobility Parameters in Rheological Behaviour of Low Cement Content Mortars (opens in a new tab)

  5. Global Assesment of Interparticle Separation Distance on Low Cement Content Paste Mixtures

    … currently focus on the reduction of Portland cement (PC). Alternatives to reduce PC content in concrete such as the use of particle packing models (PPMs) and blended systems of PC and limestone fillers (LF) have been proven to be effective. However, the combined response of PPMs and LF at high …

    carleton Repository record for Global Assesment of Interparticle Separation Distance on Low Cement Content Paste Mixtures (opens in a new tab)

  6. Structural Low Cement Content (LCC) Concrete: An Eco-friendly Alternative for Construction Industry

    … methods to reduce CO2 emissions. Portland cement (PC) often constitutes to more than two-thirds of the embodied energy of concrete, and its production generates 5% of global greenhouse gas emissions. One efficient strategy to reduce the cement content without sacrificing performance is the …

    ottawa-retro Repository record for Structural Low Cement Content (LCC) Concrete: An Eco-friendly Alternative for Construction Industry (opens in a new tab)

  7. Examining the Effects of Reducing the Cement Content of Portland Cement Concrete Pavement

    Portland cement is a significant component in a concrete mixture. For concrete used in portland cement concrete pavement (PCCP), the Arkansas Department of Transportation (ARDOT) specifies a minimum cementitious material content of 564 lb/yd3 and a maximum water-cementitious material ratio of 0.45. …

    arkansas Repository record for Examining the Effects of Reducing the Cement Content of Portland Cement Concrete Pavement (opens in a new tab)

  8. Determination of Water and Cement Content of Fresh Concrete by Nuclear and Chemical Methods

    Made available in DSpace on 2014-12-13T19:31:40Z (GMT). No. of bitstreams: 1 7804030.pdf: 7013662 bytes, checksum: 2a82e05b23fd47e0f3afdf67645c9b6b (MD5) Previous issue date: 1977

    uiuc Repository record for Determination of Water and Cement Content of Fresh Concrete by Nuclear and Chemical Methods (opens in a new tab)

  9. Application of Low-Portland Cement Content Binders for Potential High-Strength Concrete Masonry Unit Manufacturing

    … with lower carbon footprints. Replacing high contents of Portland cement with supplementary cementitious materials (SCMs) in the mixture design of CMUs is a promising approach towards reducing the carbon footprint of these units. The current study aimed to develop a high-strength dry-mix …

    calgary Repository record for Application of Low-Portland Cement Content Binders for Potential High-Strength Concrete Masonry Unit Manufacturing (opens in a new tab)

  10. Evaluation of Troxler 3241-C nuclear asphalt content gauge used for Marshall specimens

    Asphalt cement content is one of the most important requirements for producing high quality hot-mix asphalt. The determination of the asphalt cement content of hot-mix asphalt by traditional methods is time consuming and hazardous. A demand for faster and safer methodes) led to the development of a …

    vt Repository record for Evaluation of Troxler 3241-C nuclear asphalt content gauge used for Marshall specimens (opens in a new tab)

  11. Investigation of Shear Modulus and Material Damping of a Lightly Cemented Silty Sand Representing Offshore Soil

    … soils critical. Since many offshore soils are cemented, understanding their response to dynamic loads is essential for developing accurate models that improve the reliability and cost-effectiveness of offshore structure designs. This study examines the impact of cement content on shear modulus, …

    south-carolina Repository record for Investigation of Shear Modulus and Material Damping of a Lightly Cemented Silty Sand Representing Offshore Soil (opens in a new tab)

  12. Contractor Variability in Construction of Cement Treated Base Layers

    … correlated to specific mechanical properties of cement-treated base (CTB) layers and to determine which construction factors exhibit comparatively high variability within individual construction sections of the two pavement reconstruction projects included in this study. In addition, differences …

    byu Repository record for Contractor Variability in Construction of Cement Treated Base Layers (opens in a new tab) Download PDF for Contractor Variability in Construction of Cement Treated Base Layers (opens in a new tab)

  13. Strength of Masonry Grout Made with Expanded Shale

    … proportions, as well as the same target water-cement (w/c) ratio and cement content. The weight of the cement was increased by 30 percent in the third grout type of each set to determine the effect on strength. The slump, component temperature, unit weight, air content, segregation, cement …

    byu Repository record for Strength of Masonry Grout Made with Expanded Shale (opens in a new tab) Download PDF for Strength of Masonry Grout Made with Expanded Shale (opens in a new tab)

  14. High Early-Age Strength Concrete for Rapid Repair

    … and non-air-entrained concretes. The cement types chosen for this study included Type III and Type V Portland cement and “Rapid Set” − a Calcium Sulfoaluminate (CSA) cement. In addition, two blended concretes containing different ratios of Type V Portland cement and CSA cement were …

    unlv Repository record for High Early-Age Strength Concrete for Rapid Repair (opens in a new tab) Download PDF for High Early-Age Strength Concrete for Rapid Repair (opens in a new tab)

  15. The development of a field procedure for determining the chloride content of concrete and an analysis in the variability of the effective diffusion constant

    … to the remaining methods selected. Effects of cement content and reaction temperature on the results obtained for the specific ion probe were also investigated. Results of the tests for the effects of cement content were somewhat inconclusive, but indicated more variability in the results as …

    vt Repository record for The development of a field procedure for determining the chloride content of concrete and an analysis in the variability of the effective diffusion constant (opens in a new tab)

  16. On the strength of saturated cement-treated soil reconstituted by wet-mixing

    … the influence of (i) sand-silt ratio, (ii) cement content, (iii) water content and (iv) time on the unconfined compressive strength of saturated cement-treated soil specimens. A new test device and method of specimen reconstitution were conceived in order to obtain a saturated mix of soil …

    ubc Repository record for On the strength of saturated cement-treated soil reconstituted by wet-mixing (opens in a new tab) Download PDF for On the strength of saturated cement-treated soil reconstituted by wet-mixing (opens in a new tab)

  17. Development of a theory of particle mixtures and its application to aggregates, mortars and concretes

    … as water demand, cohesion and per cent fines, cement content and plastic density. Derived relationships are examined including those between water demand and cement content The original concept proposed by the author in 1983 has been confirmed in principle and modified in detail on the basis of …

    city-london Download PDF for Development of a theory of particle mixtures and its application to aggregates, mortars and concretes (opens in a new tab)

  18. Comprehensive analysis of cemented mine tailings granular materials anisotropy under multiaxial loading

    … studying the geomechanical behavior of two cemented granular materials: (i) iron ore tailing, and (ii) ordinary sand, when subjected to multiaxial loading conditions. Unconfined compressive, splitting tensile, ultrasonic pulse velocity, triaxial, and true triaxial tests were carried out to a …

    brazil-ufrgs Repository record for Comprehensive analysis of cemented mine tailings granular materials anisotropy under multiaxial loading (opens in a new tab)

  19. Cement Stabilization of Aggregate Base Materials Blended with Reclaimed Asphalt Pavement

    … the effects of reclaimed asphalt pavement (RAP) content and cement content on the strength and durability of recycled aggregate base materials. Specifically, the unconfined compressive strength (UCS) and final dielectric value in the Tube Suction Test (TST) were measured in a full-factorial …

    byu Repository record for Cement Stabilization of Aggregate Base Materials Blended with Reclaimed Asphalt Pavement (opens in a new tab) Download PDF for Cement Stabilization of Aggregate Base Materials Blended with Reclaimed Asphalt Pavement (opens in a new tab)

  20. STRENGTH AND COMPRESSIBILITY BEHAVIOUR OF CEMENTED SANDY CLAY

    … understand the effect of sand on the matrix of cemented clays. Since there are no proper guidelines for mix design regarding cemented sandy clay from literature, the thesis starts by examining three conceptual case studies, to arrive at a suitable procedure for analysing cemented binary …

    nus Repository record for STRENGTH AND COMPRESSIBILITY BEHAVIOUR OF CEMENTED SANDY CLAY (opens in a new tab) Download file for STRENGTH AND COMPRESSIBILITY BEHAVIOUR OF CEMENTED SANDY CLAY (opens in a new tab)

Page 1 of 9