Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 763 for “"CFD model"”.

  1. One-dimensional CFD model of a multiphase loop polymerization reactor

    … multiphase Computational Fluid Dynamics (CFD) model was successfully developed in MATLAB and applied toward modeling the behavior of a generalized liquid-solid tubular loop polypropylene polymerization reactor. The model equations were based on a two-fluid Eulerian model with the key …

    iastate Repository record for One-dimensional CFD model of a multiphase loop polymerization reactor (opens in a new tab)

  2. Advanced CFD model of multiphase photobioreactors for microalgal derived biomass production

    … is to develop and validate better computational models to investigate the interplay between fluid hydrodynamics, radiation transport and algae growth, which is crucial to determine the performance and scalability of algae photobioreactors.</p> <p>First, a detailed review of the pertinent …

    iastate Repository record for Advanced CFD model of multiphase photobioreactors for microalgal derived biomass production (opens in a new tab)

  3. Development of a CFD Model for the Drying of Aluminum-clad Spent Nuclear Fuel

    … The purpose of this work is to develop a model on the basis of computational uid dynamics (CFD) by which a reasonable and accurate estimate of any residual water content may be estimated. The resulting framework is built on the basis of the classical Navier-Stokes equations for the …

    south-carolina Repository record for Development of a CFD Model for the Drying of Aluminum-clad Spent Nuclear Fuel (opens in a new tab)

  4. Development of a Simplified CFD Model for In-Cylinder Flow in Two-Stroke Engines

    … by increasing the time step and changing a gas model. Finally, the successful changes from the three different approaches are combined into one single model. To verify that the changes made does not impact the results of the simulations significantly, several measurements are set up in the model …

    chalmers Repository record for Development of a Simplified CFD Model for In-Cylinder Flow in Two-Stroke Engines (opens in a new tab)

  5. A Cfd model to predict pressure loss coefficient in circular ducts with a motorized damper

    … damper using computational fluid dynamics. The CFD package Star-CD was used to predict the air flow and pressure distribution in the duct. A three dimensional computational fluid dynamics model was developed and simulated for five different positions of the damper ranging from partially opened …

    unlv Repository record for A Cfd model to predict pressure loss coefficient in circular ducts with a motorized damper (opens in a new tab) Download PDF for A Cfd model to predict pressure loss coefficient in circular ducts with a motorized damper (opens in a new tab)

  6. An integrated thermal-hydraulic system CFD model of a prismatic block HTR core using Flownex

    … of a thermal-hydraulic Flownex network based model for a prismatic block-type HTR that can reasonably predict the temperature distribution for a standard fuel block. The application of the methodology is illustrated through Flownex models of segments and assemblies of the standard fuel block …

    nwu-za Repository record for An integrated thermal-hydraulic system CFD model of a prismatic block HTR core using Flownex (opens in a new tab)

  7. Effect of Nozzle Exit Position on the Performance of Geothermal Ejectors Using a Parametric CFD Model

    … ejector using a computational fluid dynamics (CFD) model with wet steam formulation, focusing on the effect of nozzle exit position (NXP) on fluid entrainment. A parametric geometry and meshing approach was developed, allowing the NXP to be varied independently while keeping all other geometric …

    reykjavik Repository record for Effect of Nozzle Exit Position on the Performance of Geothermal Ejectors Using a Parametric CFD Model (opens in a new tab)

  8. Validation of a multiphase CFD model with mass transfer for xenon removal in molten salt reactor

    … to developing a computational fluid dynamics (CFD) model as a design tool for the xenon removal system in fueled salt reactors. Beginning with the review of gaseous fission product removal, the possibility and limitation of CFD with multiphase species transfer modeling are discussed. The …

    uiuc Repository record for Validation of a multiphase CFD model with mass transfer for xenon removal in molten salt reactor (opens in a new tab)

  9. Verification and Development of a Steady Thermal CFD Model for High Density Staging of Radiological Materials Packages

    … verify results of a computational fluid dynamics model with a densely-packed array of staged heat generating packages in a theoretical ventilated room for the purposes of developing an application that estimates the surface temperatures of the packages with configurable loading conditions. A …

    unr Repository record for Verification and Development of a Steady Thermal CFD Model for High Density Staging of Radiological Materials Packages (opens in a new tab)

  10. Transient Multi-scale Computational Fluid Dynamics (cfd) Model For Thrombus Tracking In An Assit Device Vascular Bed

    … functions and even death. A multi-scale CFD analysis a patient specific geometry model is used as well as a lumped system which provides the correct conditions in order to simulate the whole cardiovascular system. The main goal of the study is to understand the difference in flow behavior …

    ucf Repository record for Transient Multi-scale Computational Fluid Dynamics (cfd) Model For Thrombus Tracking In An Assit Device Vascular Bed (opens in a new tab)

  11. A CFD model for the coupling of multiphase, multicomponent and mass transfer physics for micro-scale simulations

    … work a holistic computational fluid dynamics (CFD) model that couples the physics of multiphase flow, multicomponent flow and mass transfer physics across the multiphase interface is presented. The CFD model uses the volume-of-fluid (VOF) multiphase model as its foundation, and is applicable …

    unsw Repository record for A CFD model for the coupling of multiphase, multicomponent and mass transfer physics for micro-scale simulations (opens in a new tab)

  12. A Two-Phase Flow CFD Model for Predicting Rotordynamic Performance of Annular Seals During Laminar-to-Turbulent Transition

    This work uses a computational fluid dynamics (CFD) model to predict the leakage and rotor-dynamic coefficients of a smooth annular turbomachinery seal operating with bubbly two-phase flows for gas volume fractions up to 10%. An experiment was first performed to determine the critical Reynolds …

    tamu Repository record for A Two-Phase Flow CFD Model for Predicting Rotordynamic Performance of Annular Seals During Laminar-to-Turbulent Transition (opens in a new tab)

  13. Development of a Validated CFD Model For Simulation of Tube Heat Exchangers: A Comparison of Methods and Models

    … two tube heat exchanger geometries have been modelled and simulated in Siemens Star-CCM+, a commercial CFD software. The heat exchanger geometries are taken from the book Compact Heat Exchangers (1984) by William M. Kays and Alexander L. London. This book contains experimental data for a wide …

    chalmers Repository record for Development of a Validated CFD Model For Simulation of Tube Heat Exchangers: A Comparison of Methods and Models (opens in a new tab)

  14. A 3D finite volume based CFD model to improve on-farm stored grain aeration strategies under Southern Australian conditions

    … to mitigate this issue with the help of a 3D CFD model for on-farm storage silos. The study showed that the numerical approach differs when the efficiency is scaled up from lab-scale to on-farm grain storage scenarios. The model also showed that for southern Australian conditions, cooling …

    adelaide Repository record for A 3D finite volume based CFD model to improve on-farm stored grain aeration strategies under Southern Australian conditions (opens in a new tab)

  15. Turbulence Wind Flow Modeling in Complex Terrain. A Comparison Between a Linear Model, a CFD Model and a NWP Model.

    … predictions has been made for three different models. Predictions were made for a planned wind farm located at Skottfjället on the west coast of Sweden. Simple linear models have shown difficulty in predicting the wind resource for terrain that are forested and hilly. This thesis concludes that …

    chalmers Repository record for Turbulence Wind Flow Modeling in Complex Terrain. A Comparison Between a Linear Model, a CFD Model and a NWP Model. (opens in a new tab)

  16. Incorporating computational fluid dynamics into a virtual engineering environment

    … for integrating computational fluid dynamics (CFD) models into a virtual engineering environment. The goal of this research is to enable a non-CFD expert to readily incorporate changes to a reduced CFD model and to view the results of those changes in an intuitive and natural manner. There are …

    iastate Repository record for Incorporating computational fluid dynamics into a virtual engineering environment (opens in a new tab)

Page 1 of 39