Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1141 for “"CFD simulations"”.

  1. CFD Simulations of a Propeller-Wing Interaction

    … mesh generation software, GRIDGEN, and then simulations were performed using a commercial finite volume Reynolds-Averaged Navier-Stokes (RANS) solver FLUENT. Initial runs were performed to validate the boundary conditions and setup of the problem where a hybrid mesh consisting of multi-blocks …

    odu Repository record for CFD Simulations of a Propeller-Wing Interaction (opens in a new tab)

  2. Assessment of Varying Model Representations in CFD Simulations

    … representation of computational fluid dynamics (CFD) simulations in two case studies. Product and process realization in engineering design requires substantial resources (time and money) in order to test novel designs for effectiveness. In recent decades, engineering has been relying more …

    sdstate Repository record for Assessment of Varying Model Representations in CFD Simulations (opens in a new tab)

  3. CFD simulations in support of wind tunnel testing

    CFD and wind tunnel simulations are complementary due to their inherent limitations. Wind tunnel tests apply to any hypothesis, but are limited by the tunnel wall interference/blockage, the model details, and even the distortion of the model. CFD are not limited in any of these ways, but limited in …

    glasgow Download PDF for CFD simulations in support of wind tunnel testing (opens in a new tab)

  4. Aerodynamic optimization using high-order finite-volume CFD simulations

    … of the aircraft. Higher order methods in CFD simulations have proved to be a valuable tool and are expected to replace current second order CFD methods in the near future; therefore, exploring the use of higher order CFD methods in aerodynamic optimization is of great research interest and …

    ubc Repository record for Aerodynamic optimization using high-order finite-volume CFD simulations (opens in a new tab) Download PDF for Aerodynamic optimization using high-order finite-volume CFD simulations (opens in a new tab)

  5. Transient CFD simulations of pumping and mixing using electromagnetic

    … two dimensional and three dimensional, transient CFD simulations are conducted to investigate the active pumping and mixing in microfluidics driven by Electromagnetic/Lorentz force. Shallow disk/ring cylindrical microfluidic cell and shallow cuboid microfluidic cell with electrodes deposited on …

    must-thes Repository record for Transient CFD simulations of pumping and mixing using electromagnetic (opens in a new tab)

  6. Applications of CFD Simulations on Chemical Processing Equipment Designs

    … by seeking optimal equipment design with CFD investigations. In this work, two projects on chemical equipment design have been discussed. The first project is on design and optimization of fractal distributor in a novel ion-exchanger. Flow distributors are adopted extensively by chemical …

    lsu-thes Repository record for Applications of CFD Simulations on Chemical Processing Equipment Designs (opens in a new tab)

  7. CFD simulations of AdBlue spray in an exhaust pipe

    … systems often uses Computational Fluid Dynamics, CFD, to deal with the turbulent and multi-phase flow, however these are in many cases computationally expensive. The thesis deals with developing a CFD model that is reliable while still being computationally affordable. The simulation was made in …

    chalmers Repository record for CFD simulations of AdBlue spray in an exhaust pipe (opens in a new tab)

  8. Experimental studies and CFD simulations of conical spouted bed hydrodynamics

    … as compared to cylindrical spouted beds. No CFD simulation model has been developed to predict static pressure profiles, and there is a lack of experimental data on such characteristics as the evolution of the internal spout, particle velocity distribution, voidage distribution and gas …

    ubc Repository record for Experimental studies and CFD simulations of conical spouted bed hydrodynamics (opens in a new tab) Download PDF for Experimental studies and CFD simulations of conical spouted bed hydrodynamics (opens in a new tab)

  9. IMEX and Semi-Implicit Runge-Kutta Schemes for CFD Simulations

    Numerical Weather Prediction (NWP) and climate models parametrize the effects of boundary-layer turbulence as a diffusive process, dependent on a diffusion coefficient, which appears as nonlinear terms in the governing equations. In the advection dominated zone of the boundary layer and in the free …

    ottawa-retro Repository record for IMEX and Semi-Implicit Runge-Kutta Schemes for CFD Simulations (opens in a new tab)

  10. Experimental Validations of CFD Simulations and Models in Chemical Applications

    … systems. Computational Fluid Dynamics (CFD) can provide information on local conditions in the equipment. However, we are still far away from the possibility of modeling all the phenomena in industrial-scale vessels, due to the computational capacity required. A possible trade-off …

    aalto Repository record for Experimental Validations of CFD Simulations and Models in Chemical Applications (opens in a new tab)

  11. Analysis of Multiphase Flow Centrifuge Decanter Separator Using CFD Simulations

    … decanter by using computational fluid dynamics (CFD) as a simulation tool in combination with the field of multiphase flow modeling to understand the decanter’s different components and complex functions at high rotational speeds. This makes the decanter a very demanding topic for this type of …

    chalmers Repository record for Analysis of Multiphase Flow Centrifuge Decanter Separator Using CFD Simulations (opens in a new tab)

  12. CFD simulations of mixing processes in Direct Injection SI engines

    … the piston surface were studied using CONVERGE CFD soft ware. The simulations were performed by selecting a single component (iso-octane) and a multi-component fuel blend (iso-octane, n-hexane, n-decane) as surrogates for gasoline, in a Volvo single cylinder medium tumble 4 valve direct …

    chalmers Repository record for CFD simulations of mixing processes in Direct Injection SI engines (opens in a new tab)

  13. CFD-simulations of urea-SNCR for NOx-reduction in combustion

    … of NOx reduction in a certain urea-SNCR system, simulations are advised to be conducted, it can be used to optimize the system design, which also significantly reduces the time and costs of experimental optimization in the real plant. In the simulation, urea evaporation and decomposition and NOx …

    chalmers Repository record for CFD-simulations of urea-SNCR for NOx-reduction in combustion (opens in a new tab)

  14. Open Source Mesh Generation and CFD Simulations for Francis Turbine

    … validate the mesh and mesh generation procedure simulations were carried out various operating conditions to analyse the flow. Two equation RANS models, standard k-e and it's variant RNG k-e model have been used for turbulence modelling. The efficiency of turbine did not vary much with choice of …

    chalmers Repository record for Open Source Mesh Generation and CFD Simulations for Francis Turbine (opens in a new tab)

  15. Framework for Integrated Multi-Scale CFD Simulations in Architectural Design

    … design problem. Computational Fluid Dynamics (CFD) analysis is one of the approaches that have gained popularity in the testing of architectural design solutions especially for purposes of evaluating the performance of natural ventilation strategies in buildings. Natural ventilation strategies …

    vt Repository record for Framework for Integrated Multi-Scale CFD Simulations in Architectural Design (opens in a new tab)

  16. Validation of CFD Simulations for Hypersonic Flow Over a Yawed Cone

    … wind tunnel experiment at Cal Tech. The six simulations cases are conducted for yaw angles of 0, 8, 12, 16, 20 and 24 degrees. The unsteady Reynolds-Averaged compressible Navier-Stokes solver with Spalart-Allmaras (SA) turbulence model is employed. The upstream flow Mach number is M = 8 and …

    wustl Repository record for Validation of CFD Simulations for Hypersonic Flow Over a Yawed Cone (opens in a new tab)

  17. CFD SIMULATIONS FOR SCALE UP OF WET MILLING IN HIGH SHEAR MIXERS

    … on final product quality. In this work, CFD results at different scales are used to aid in the scale up of crystal wet milling processes. CFD simulations were performed to simulate different scale mixers. In addition, wet milling studies were conducted at the bench scale to complement the …

    maryland Repository record for CFD SIMULATIONS FOR SCALE UP OF WET MILLING IN HIGH SHEAR MIXERS (opens in a new tab)

  18. CFD Simulations and Thermal Design for Application to Compressed Air Energy Storage

    … heat transfer. Computational Fluid Dynamics (CFD) and design analyses on the heat exchangers are done in the present research. Two main types of heat exchangers, a commercially available, open-cell metal foam and an in-house designed interrupted plate matrix, are investigated, mainly through …

    umn Repository record for CFD Simulations and Thermal Design for Application to Compressed Air Energy Storage (opens in a new tab)

Page 1 of 58