Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 95 for “"CFRPs"”.
-
Micro-mechanical contributions to interlaminar toughness in particle-toughened CFRPs
The main objective of this thesis was to increase the understanding of interlaminar toughening mechanisms in particle-toughened interlayers within carbon/epoxy laminates. High-resolution Synchrotron Radiation Computed Tomography (SRCT)and Synchrotron Radiation Computed Laminography (SRCL) allowed …
-
Self-Healing of CFRPs using micro-capsules or/and micro-vascules
Over the past 20 centuries the properties of structural materials have improved tremen-dously in every aspect and further improvements are continue due to a slow trial and error process. One recurring goal of material development has been to emulate the ma-terials of nature. Among these, the most …
-
Physically-based meso-scale modelling of unidirectional CFRPs for impact loading applications
<p>While the physical understanding of UD CFRPs and the processes that govern their mechanical response is continuously improving, macro-scale modelling still often relies on empirical, over-simplified constitutive laws and failure criteria. In addition, many aspects of the rate-dependency and …
-
Advancing Life Cycle Assessment for Environmental Sustainability of Carbon Fiber-Reinforced Polymer Composites (CFRPS))
Carbon fiber-reinforced polymer composites (CFRPs) have emerged as promising materials, particularly for lightweight applications, with the potential to reduce environmental impacts across multiple sectors, including automotive, aerospace, and renewable energy. However, fully realizing their …
-
A Study of the abrasive waterjet hole machining processes on woven CFRPs and the jet impact characteristics
… the woven carbonfibre reinforced polymers (CFRPs) that are gaining increasing industrial applications, remains unclear, while the knowledge of delamination induced by the machining process is even in more dearth. Furthermore, there is little reported study on the jet impact process and …
-
Development and evaluation of an optimized solvolysis recycling process for CFRPs: fiber performance and environmental-economic impact
… adoption of carbon fiber reinforced polymers (CFRPs) in high-performance engineering applications, including aerospace, automotive, wind energy,and sports sectors, has led to a substantial increase in composite waste at the end of product life. CFRPs are favored due to their exceptional …
-
Out of autoclave manufacturing of CFRPs having multiscale reinforcement for improved interlaminar fracture toughness and multifunctional characteristics
Carbon fiber reinforced polymer (CFRPs) composites are increasingly used as advancedmaterials in many structural applications i.e. aerospace, automotive, marine etc. due totheir superior in-plane mechanical properties, high specific strength and stiffness andcorrosion resistance compared to …
-
Fatigue, Fracture and Impact of Hybrid Carbon Fiber Reinforced Polymer Composites
… the carbon fiber reinforced polymer composites (CFRPs) suitable structural materials for variety of applications such as aerospace, automotive, civil, sporting goods, etc. Despite the outstanding performance of the CFRPs along their fibers direction (on-axis), they lack sufficient strength and …
-
Rotary ultrasonic surface machining of carbon fiber reinforced plastic composites
… can be effectively reduced in the hole making of CFRPs using rotary ultrasonic machining with vertical ultrasonic vibration, which is originally developed for the hole making process. Therefore, rotary ultrasonic machining with vertical ultrasonic vibration is extended to the surface machining of …
-
Fracture behavior of block copolymer and graphene nanoplatelet modified epoxy and fiber reinforced/epoxy polymer composites
… reinforced/epoxy polymer composites (GFRPs and CFRPs) have high strength-to-weight and stiffness-to-weight ratios. Thus, GFRPs and CFRPs are used to lightweight aircraft, marine and ground vehicles to reduce transportation energy utilization and cost. However, GFRP and CFRP matrices have a low …
-
Engineering the Microstructure of Carbon Fiber-Reinforced Polymer Composites by Cellulose Nanocrystal–Carbon Nanomaterials
… (CNTs) and graphene nanoplatelets (GNPs) into CFRPs is challenging because of the need for complicated lab-scale processes and toxic chemical grafting or dispersants that makes conventional means of processing less compatible with existing industrial procedures for large-scale applications. …
-
Self-Healing Behavior of Vitrimeric Composites
… However, the repair and maintenance of CFRPs present significant challenges. This study explores the processing and self-healing capabilities of vitrimer-based CFRPs, focusing on an aromatic thermosetting co-polyester (ATSP) vitrimer. Vitrimers are a class of thermosetting polymers known …
-
Effect of Manufacturing and Machining Process on Recycled Composite Connecting Rods Under Tension and Compression
… material properties. Such properties make CFRPs especially useful for applications across many industries, including aerospace, automotive, marine, sporting goods, oil and gas, and more. However, with such favorable material properties comes the cost of high energy usage required to produce …
-
Detection, quantification and prediction of interlaminar crack propagation in carbon-fiber reinforced polymers informed by high resolution ultrasonic testing.
Carbon fiber-reinforced polymers (CFRPs) are widely used in aerospace, automotive, and industrial applications due to their advantageous properties such as, high strength-to-weight ratio and fatigue resistance. However, their susceptibility to delamination presents a significant challenge, …
-
Impact fatigue damage in CFRP
… conditioning and repetitive impact loading on CFRPs. Commonly used techniques for evaluating impact damage typically rely on non-kinematic measurement techniques or destructive mechanical tests, contributing to high material and equipment costs. The current work addresses these concerns by …
-
Mechanical and Electrical Characterization of Carbon Fiber/Bucky Paper/Zinc Oxide Hybrid Composites
… carbon fiber reinforced composites (CFRPs) expedited the use of several nano reinforcements such as zinc oxide nanorods (ZnO) and carbon nanotubes (CNTs). Zinc oxide is semi-conductor with good piezoelectric and pyroelectric properties. These properties could be transmitted to CFRPs …
-
Modeling flexural failure in composites using ANSYS ACP
… designing. Carbon fiber reinforced polymers (CFRPs) are among the most used composites in industries. Benefits of CFRPs include higher strength- and stiffness-to-weight ratios, established material supply, chemical resistance, and being biologically inert. However, CFRPs, like many composites, …
-
Terfenol-D Carbon Fiber Reinforced Polymer (CFRP) Embedded Sensing for Early Damage Detection
Carbon Fiber Reinforced Polymers (CFRPs) have become an essential part of designing and engineering lightweight rigid bodies; predominantly in the aerospace and automotive industries. Typical epoxy-based CFRPs exhibit virtually no plasticity with minimal strainto failure. Although CFRPs have high …
-
Additively Manufactured Continuous Carbon Fiber Thermoplastic Composites for High-Performance Applications
… fiber reinforced polymer matrix composites (CFRPs). AM can provide valuable advantages over conventional composite manufacturing techniques, including the control over fiber orientation, capability of manufacturing complex geometries, out-of-autoclave processing, elimination of the need for …
-
Multiscale Fibre Composites for Cryogenic Storage Applications: Toughening Technologies and Suppression of Matrix Cracking
… Thus, the suppression of matrix cracking in CFRPs at cryogenic temperatures remains a significant challenge. This research thesis aims to develop new scientific understanding of the effects of cryogenic temperature on the matrix cracking phenomenon in CFRPs and new technologies to address …
Page 1 of 5