Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 339 for “"CLSM"”.
-
Controlled Low-Strength Material (CLSM) produced from limestone fines and other byproducts
Controlled Low Strength Material (CLSM) or flowable fill mixtures are typically specified and used in lieu of compacted fill especially for backfill, utility bedding, void fill and bridge approaches. This study developed flowable fill mixtures containing only quarry fines, fly ash, synthetic gypsum …
-
Detection method for salt content and spatial distribution in bread using CLSM
A major health concern today is the increasing intakes of salt from many of the food products consumed every day. The high salt content contributes to health issues like raised blood pressure and increased risk for cardiovascular disease. A national project to reduce the amount of salt in several …
-
Distortion-constraint compression of three-dimensional CLSM images using image pyramid and vector quantization
The confocal microscopy imaging techniques, which allow optical sectioning, have been successfully exploited in biomedical studies. Biomedical scientists can benefit from more realistic visualization and much more accurate diagnosis by processing and analysing on a three-dimensional image data. The …
-
Engineering Characterization and Adaptation of Controlled Low Strength Material (CLSM) Containing High Pozzolan Contents for Civil Engineering Applications
… to adapt Controlled Low Strength Material (CLSM) to other structural applications, in particular, as a self-consolidating base material (SCBM). The typical constituents of an SCBM are fine aggregate, pozzolanic material, Portland cement, and water, and the mix is designed to use high levels …
-
Pilotstudie zur klinischen Untersuchung der oralen Biofilmbildung auf verschiedenen Bracket-Adhäsivsystemen mittels der Konfokalen Laser-Scanning-Mikroskopie (CLSM)
… angefärbt und der Analyse mittels CLSM zugeführt. Es bildete sich ein Biofilm mit einer durchschnittlichen Höhe von 24-118 µm. Die durchschnittliche Gesamtvitalität war für Steadey Resin mit 13%±12,4%am geringsten und für Heliosit® mit 40,1%±22,2% am höchsten. Die Vitalität nahm von …
-
Performance of Steel Pipelines Backfilled with Controlled Low-Strength Material (CLSM) under Seismic Wave Propagation and Reverse-Slip Fault Rupture
… under loads. Controlled Low-Strength Materials (CLSM) is a group of cementitious materials that can be used as an alternative to compacted soils to backfill pipelines. These mixtures are highly flowable in their fresh state and are solid in the final state providing a uniform support around …
-
Laboratory investigations of controlled low-strength material
… properties of controlled low-strength material (CLSM) and the corresponding test methods for evaluating the characteristics of this material. A wide range of CLSM mixtures were included in this study. Fresh properties of CLSM were evaluated. The use of bottom ash, foundry sand, and high-carbon …
-
Physiochemical characteristics of controlled low strength materials influencing the electrochemical performance and service life of metallic materials
Controlled Low Strength Materials (CLSM) are cementitious self-compacting materials, comprised of low cement content, supplementary cementing materials, fine aggregates, and water. CLSM is typically used as an alternative to conventional compacted granular backfill in applications, such as pavement …
-
Design parameters for using controlled low-strength material backfill to manage axial soil loads on buried pipelines
… pipeline in controlled, low-strength material (CLSM). The use of CLSM to increase axial soil restraint on buried pipelines requires that the axial load to produce pipe-CLSM interface bond failure be greater than that required for failure at the CLSM-soil interface. To advance the state of …
-
Beneficial Reuse of Corrugated Paperboard in Civil Engineering Applications
… drilling, and controlled low strength materials (CLSM). For the purpose of this project, corrugated paperboard was pulped and added to bentonite slurry or CLSM mixtures. Bentonite slurry mixtures were tested for viscosity, density, filtrate loss, and permeability. The behavior of the bentonite …
-
ADVANCED IMAGING AS A NOVEL APPROACH TO THE CHARACTERIZATION OF MEMBRANES FOR MICROFILTRATION APPLICATIONS
… by confocal laser scanning microscopy (CLSM) and the implementation of my newly developed CLSM cross-sectional imaging protocol. Depth-of-penetration limits were identified to be approximately 24 microns and 7-8 microns for mixed cellulose ester and polyethersulfone membranes, …
-
The Effect of Resection on the Sealer-Dentin Interface in Roots Obturated with Tricalcium Silicate Sealer: A Confocal Laser Scanning Microscopy and India Ink Penetration In Vitro Pilot Study
… bur. A Confocal Laser Scanning Microscope (CLSM) was utilized to examine the resected root ends and capture images. After examination with CLSM was complete, all specimens were placed in India ink for 48 hours. Following India ink exposure, all specimens were scored on their mesial and …
-
Implementation of Agriculture Wastes in Different Construction Applications
… known as Controlled low strength materials (CLSM), was tested as a potential hosting for high amounts of agro-wastes. Two types of CLSM were evaluated: a cement-based CLSM (i.e. with ordinary Portland cement) and zero-cement CLSM (i.e. with alkali-activated binder). Results showed the high …
-
Protein sorption to contact lenses and intraocular lenses
… and using confocal laser scanning microscopy (CLSM) the sorption profile to contact lenses and IOL could be determined. Radiolabeled protein was used for quantification purposes. • Albumin sorption to etafilcon A and lotrafilcon B was determined (Chapter 3) • Different fluorescent probes were …
-
LASER MULTI-SPECTRAL CONFOCAL MICROSCOPY FOR STRUCTURED ILLUMINATION IMAGING
… the applicability of SIM principle to CLSM. This research focuses on experimental investigation and developing a state-of-the-art instrumentation that can be deployed to demonstrate this concept. Research challenges are expected for all aspects of the proposed work. The anticipated …
-
Study of microfluidic measurement techniques using novel optical imaging diagnostics
… based on confocal laser scanning microscopy (CLSM) and optical serial sectioning microscopy (OSSM). Two microscopic measurement systems were developed, 1) a CLSM micro particle image velocimetry (PIV) system with a dual Nipkow disk confocal unit (CSU-10), a CW argon-ion laser and an upright …
-
Evaluation of Passive Force on Skewed Bridge Abutments with Controlled Low-Strength Material Backfill
… widespread, controlled low-strength material, or CLSM, has fallen through the crack between geotechnical engineering and materials engineering research. The National Ready Mix Association states that CLSM is not a low strength concrete, and geotechnical engineers do not consider it as a …
Page 1 of 17