Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 102 for “"CLT panels"”.
-
Retrofitting CLT Panels and Glulam Beams Subjected to Static and Dynamic Loads
… timber products such as cross-laminated timber (CLT) and glued laminated timber (glulam) have become more common in contemporary structures, particularly mid- to high-rise ones, as a result of their development. Although engineered wood products are structurally efficient and reliable, their …
-
Numerical analysis of the adhesive effect on moisture-induced stresses and deformations in CLT panels
… materials such as cross-laminated timbers (CLT) are increasingly being used in the construction of green buildings worldwide. Such products may be exposed to cyclic environmental conditions and exhibit moisture-induced damage. The main objective of this study is to develop and validate an …
-
Modeling of CLT creep behavior and real-time hybrid simulation of a CLT-LiFS building
CLT-LiFS is an innovative hybrid structural system. This type of structure has emerged as a promising structural system for mid-rise to tall wood buildings in the seismic areas. CLT-LiFS is made by integrating post-tensioned Cross Laminated Timber (CLT) panels with Light Frame Wood Systems (LiFS). …
-
Behaviour of Cross-Laminated Timber Panels Subjected to Near-Field Blast Loads
… behaviour of cross-laminated timber (CLT) panels under near-field blast loading. A total of six 3-ply CLT panels were subjected to live explosive testing with the aim of establishing material behaviour of CLT under near-field blast loads. The observed failure modes of the CLT panels …
-
Contribution of cross laminated timber panels to room fires
… the contribution of Cross Laminated Timber (CLT) panels to the development, duration and intensity of room fires. The tests were conducted in rooms constructed from 105 mm thick 3-Ply CLT panels and measured 3.5m wide by 4.5 m long by 2.5 m high. Propane and furniture fires were used with the …
-
EVALUATION OF CROSS-LAMINATED TIMBER PANELS PRODUCED WITH YELLOW-POPLAR (Liriodendron tulipifera)
Cross-Laminated Timber (CLT) panels are engineered wood products breaking into the building sector. Currently, the range of raw materials used in CLT is still limited to softwoods, while some hardwood species such as yellow-poplar could potentially be used to produce this wood product. Therefore, …
-
PROPERTIES OF CROSS-LAMINATED TIMBER PANEL WITH LOW-VALUE LUMBER AND PERFORMANCE OF CROSS-LAMINATED TIMBER WALL SYSTEM SUBJECTED TO SEISMIC AND SEQUENTIAL SEISMIC-WIND LOADINGS
The Cross laminated timber (CLT) panels extended the market of timber material in structural construction, while its laminated structure allows layup design for utilizing low-value lumber. Through mechanical tests and numerical simulation, the mechanical properties of CLT made with low-value sugar …
-
Improving the sound absorption of cross-laminated timber panels using resonant absorbent layer
… in Austria and Germany, Cross Laminated Timber (CLT) is an innovative wood product known for its strength in both orthogonal directions, and its dimensional stability, making it a sustainable alternative to concrete slabs. CLT is created through the cross-lamination process, which glues together …
-
Strength and Serviceability Performances of Southern Yellow Pine Cross-Laminated Timber (CLT) and CLT-Glulam Composite Beam
Cross-Laminated Timber (CLT) is a relatively new engineered mass timber construction material in the North America. While CLT was invented roughly three decades ago in Europe, it was not popular in the North America until recent years, in which there has been a surging demand for mass timber …
-
Fire Resistance of Partially Protected Cross-Laminated Timber Rooms
… the fire behaviour of Cross Laminated Timber (CLT) panels in partially protected rooms. A one-dimensional heat transfer model was developed to determine the fire resistance of CLT floor and wall panels. During this study, three room fire tests were conducted at Carleton University Fire Research …
-
Exploring cross-laminated timber use for temporary military structures: Ballistic considerations
… for occupants. Cross-laminated timber (CLT) is a relatively new prefabricated engineered wood product that is strong, stiff, quick to build, and has the potential to offer inherent ballistic and blast resistance compared to traditional wood products. The orthotropic nature of CLT coupled …
-
Effect of Wood Characteristics on Adhesive Bond Quality of Yellow-Poplar for Use in Cross-Laminated Timbers
Cross-laminated timber (CLT) panels are gaining more interest in North America, though CLTs are currently only approved for manufacture under ANSI/APA PRG-320 using select softwood species. Much of the low-grade Appalachian hardwood lumber produced has potential for being used to produce CLT panels …
-
EVALUATION OF LOW-GRADE RED OAK (Quercus rubra) AND RED MAPLE (Acer rubrum) AS A RAW-MATERIAL FOR CROSS-LAMINATED TIMBER PANEL PRODUCTION
… The expanding market for Cross Laminated Timber (CLT) is an opportunity for increased utilization of low-quality hardwoods typically used in pallets or equipment mats. Large quantities of low-grade red oak (Quercus rubra) and red maple (Acer rubrum) to be used in CLTs would provide sufficient …
-
Acoustics of Cross-Laminated Timber Structures
… behaviour of cross-laminated timber (CLT) structures predicted using the wave and finite element (WFE) method. Experimental results are then presented to validate this approach. Previously, CLT has been modelled as an equivalent orthotropic plate. This approach works well at low …
-
Moisture Response of Wall Assemblies of Cross-Laminated Timber Construction in Cold Canadian Climates
… structural elements. Cross-laminated timber (CLT), as one such engineered wood product, is an emerging engineering material which provides great opportunities for the building industry. While building with wood has many benefits, there are also some concerns, particularly decay. Should wood be …
-
Seismic design and performance evaluation of balloon-type CLT shear walls in Canada
… these buildings are cross-laminated timber (CLT) panels. This research explores the application of CLT panels as balloon-type shear walls. Balloon-type shear walls extend through multiple storeys and offer potential benefits over platform-type walls. Despite this potential, there are …
-
Parametric design of timber shell structures
… shells structures using Cross-Laminated Timber (CLT) panels. By exploring a co-rationalized design process, timber engineering details are identified and integrated into the architectural model, and the role of structural engineer takes an active rather than reactionary role in the preliminary …
-
Moisture Monitoring of a CLT Structure in a Southern Climate
… of moisture behavior in cross laminated timber (CLT) is critical to the widespread use of CLT in construction in the United States. Currently, very little data exists on the long-term impact of moisture on CLT. The objective of this research is to collect data regarding the long-term moisture …
-
Clt infill panels in steel moment resisting frames as a hybrid seismic force resisting system
This paper examines CLT-steel hybrid systems at three, six, and nine storey heights to increase seismic force resistance compared to a plain wood system. CLT panels are used as infill in a steel moment frame combining the ductility of a steel moment frame system with a stiffness and light weight of …
-
Behaviour of Cross-Laminated Timber Subjected to Blast Loading
… assess the behaviour of cross-laminated timber panels subjected to simulated blast loading using a shock tube apparatus. More specifically, the aim of this study was to investigate the behaviour of CLT panels subjected to static and dynamic loads to determine a dynamic increase factor in order …
Page 1 of 6