Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 88 for “"CMOS fabrication"”.

  1. A simple p-well CMOS fabrication process

    … research focused on the development of a p-well CMOS fabrication process that has fast turnaround time, is relatively inexpensive, and is easy to use. Most current CMOS fabrication processes use either n-well or twin-well techniques in order to provide better device isolation and improved circuit …

    iastate Repository record for A simple p-well CMOS fabrication process (opens in a new tab)

  2. CMOS Fabrication-Compatible Bragg Grating Devices and Applications

    … existing vast and robust infrastructure for the fabrication of CMOS devices can be leveraged to implement optical communication technologies in a small form-factor. These commercial silicon photonic foundries offer advantages of large-scale volume manufacturing and integration of electronics and …

    gatech Repository record for CMOS Fabrication-Compatible Bragg Grating Devices and Applications (opens in a new tab)

  3. SIMULATION & DESIGN OF LANGE COUPLER FOR CMOS FABRICATION PROCESS

    … of the transmission line on 0.18 micron CMOS technology was done in the form of a Lange coupler design on multiple metal layers. This work is motivated by the use of the SiO2 dielectric as the separating layer between the conducting lines and the ground plane, as opposed to the …

    nus Repository record for SIMULATION & DESIGN OF LANGE COUPLER FOR CMOS FABRICATION PROCESS (opens in a new tab) Download file for SIMULATION & DESIGN OF LANGE COUPLER FOR CMOS FABRICATION PROCESS (opens in a new tab)

  4. Modeling and Simulation of Silicon Photonic Crystals Effect of Oxidation and Etching

    … devices must be compatible with standard silicon CMOS fabrication processing in order to achieve the integration. Since CMOS fabrication involves a myriad of process steps, it is important to study the effect of processing on photonic devices. Oxidation and etching, two fundamental processes in …

    odu Repository record for Modeling and Simulation of Silicon Photonic Crystals Effect of Oxidation and Etching (opens in a new tab)

  5. A Microhotplate for Gas Sensing and Vacuum Measurements

    … on Complementary Metal-Oxide-Semiconductor, (CMOS) compatible microhotplate (MHP). The MHP contains a split electric heater and temperature sensor, has a small area of 0.02mm2 and operates at low overheating temperature. These features of the sensing element which are not typical for …

    concordia Download PDF for A Microhotplate for Gas Sensing and Vacuum Measurements (opens in a new tab)

  6. Post-CMOS microelectrode fabrication and packaging for on-CMOS electrochemical biosensor array

    … analysis and biosnesing. With the advance of CMOS technology and microfabrication it becomes possible to integrate and miniaturize the sensors and CMOS electronics on a single chip. The integration work involves multidisciplinary knowledge including CMOS design, biosensing and biointerface, …

    msu Repository record for Post-CMOS microelectrode fabrication and packaging for on-CMOS electrochemical biosensor array (opens in a new tab)

  7. Study of nuclear transmutation using cyclotron for post-CMOS activation of Beta emitters

    … AT AUTHOR'S REQUEST.] A study of post-CMOS fabrication process for radioisotope activation produced by nuclear transmutation is presented. Activation of the precursor occurs by nuclear transmutation and results in the desired beta emitting radioisotope. A microfabricated p-n diode on a …

    missouri Repository record for Study of nuclear transmutation using cyclotron for post-CMOS activation of Beta emitters (opens in a new tab)

  8. Cmos Backend Deposited Silicon Photonics - Material, Design, And Integration

    … scalable integration of silicon photonics with CMOS microelectronic components has not been clear. In this dissertation, we present the vision of the Backend Deposited Silicon Photonics (BDSP) platform that can seamlessly integrate silicon photonics with CMOS microelectronics without disrupting …

    cornell Repository record for Cmos Backend Deposited Silicon Photonics - Material, Design, And Integration (opens in a new tab)

  9. Development of CMOS-compatible electrostatic supercapacitors

    … with complementary metal–oxide–semiconductor (CMOS) fabrication. Wafer-scale anodised aluminium oxide (AAO) processing techniques have been developed to produce high-surface area templates. Statistically optimised atomic layer deposition (ALD) processes have been developed to conformally coat …

    cork Repository record for Development of CMOS-compatible electrostatic supercapacitors (opens in a new tab)

  10. Oxide reliability and characterization for strained and (110) substrate-oriented p-channel silicon-on-insulator MOSFETs

    … to be part of future generation technology for CMOS fabrication process. In this paper, both are evaluated for oxide reliability. Evaluation methods include negative bias temperature instability (NBTI) and stress-induced leakage current (SILC). Compared with conventional devices, both biaxial …

    texas Repository record for Oxide reliability and characterization for strained and (110) substrate-oriented p-channel silicon-on-insulator MOSFETs (opens in a new tab) Restricted access

  11. Cryogenic microwave engineering for the dispersive readout of spin-qubits

    … that is compatible with state-of-the-art CMOS fabrication techniques and facilities. However, advancements in the understanding of materials and methods for defect-qubits, gate-defined spin qubits, and other paramagnetic samples will be required to realize this potent technology. In this …

    colo-mines Repository record for Cryogenic microwave engineering for the dispersive readout of spin-qubits (opens in a new tab)

  12. Optimized Single-Electron Bipolar Avalanche Transistors for Innovative THz/IR Imaging Systems

    … Complementary Metal-Oxide Semiconductor (CMOS) fabrication technology, but they are limited by poor Signal-to-Noise Ratios (SNR) due to weak optical input power and large low-frequency noise. Traditional readout architectures address this challenge through a multi-stage amplification chain …

    trento Repository record for Optimized Single-Electron Bipolar Avalanche Transistors for Innovative THz/IR Imaging Systems (opens in a new tab)

  13. Minimizing nMOS Edge Leakage in Fully Depleted Silicon-on-Insulator CMOS Using Poly-Buffered LOCOS Isolation

    … encountered in previous student project SOI CMOS fabrication runs in the Carleton University Microfabrication Laboratory. A layout with test arrays, including enclosed geometry transistors, was designed to perform a test fabrication run. The process uses optimized oxidation steps and …

    carleton Repository record for Minimizing nMOS Edge Leakage in Fully Depleted Silicon-on-Insulator CMOS Using Poly-Buffered LOCOS Isolation (opens in a new tab)

  14. Low power optical phase shifter devices

    … silicon photonics is its compatibility with CMOS fabrication, high volume production and low cost. The optical modulator is one of the key elements in the transmission of data in short and long reach optical interconnects. With ever increasing numbers of integrated components on a chip, the …

    soton Download PDF for Low power optical phase shifter devices (opens in a new tab)

  15. Compatibility of submicron silicon CMOS circuits with gallium arsenide-on-silicon heteroepitaxy.

    … optoelectronics with high performance silicon CMOS technologies. This work presents a systematic evaluation of degradation in the performance and characteristics of submicron silicon CMOS devices, induced by heteroepitaxial growth of gallium arsenide. An aggressive yet stable, commercial 0.9 …

    wvu Repository record for Compatibility of submicron silicon CMOS circuits with gallium arsenide-on-silicon heteroepitaxy. (opens in a new tab)

  16. Development of electrochemical imaging methods using micro-electrode arrays and microfluidic networks

    … using complementary metal oxide semiconductor (CMOS) fabrication techniques as well as microfluidics and carbon-based electrodes fabricated using soft lithography fabrication techniques. The systems described in this dissertation focus on quantification of biologically relevant …

    colostate Repository record for Development of electrochemical imaging methods using micro-electrode arrays and microfluidic networks (opens in a new tab)

  17. Optically Powered Logic Transistor

    This thesis presents the modeling and fabrication of a new solid-state device meant to be used for digital logic circuits. Most current logic circuits are based on MOSFETs. The new logic device uses some of the same operating principles, but also relies on optical illumination to provide input …

    byu Repository record for Optically Powered Logic Transistor (opens in a new tab) Download PDF for Optically Powered Logic Transistor (opens in a new tab)

  18. Dual-Wavelength Polarization Independent Grating Coupler Design Based on Silicon-on-Insulator

    … optics because of its compatibility with CMOS fabrication processes and its potential for low cost and mass production. To enable efficient fiber-to-chip coupling of light, one key component is a grating coupler. With an increasing demand for wavelength-division-multiplexing systems in …

    carleton Repository record for Dual-Wavelength Polarization Independent Grating Coupler Design Based on Silicon-on-Insulator (opens in a new tab)

  19. Wafer scale exfoliation of monocrystalline micro-scale silicon films

    … wafer-based, metal-oxide-semiconductor (CMOS) fabrication techniques. It enables high-performance devices fabricated using CMOS processes to be easily integrated into flexible electronic products such as wearable or Internet of Things (IoT) devices. A finite-element linear-elastic …

    texas Repository record for Wafer scale exfoliation of monocrystalline micro-scale silicon films (opens in a new tab)

Page 1 of 5