Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"CMOS receiver"”.

  1. Low noise RF CMOS receiver integrated circuits

    … low-noise wideband RFIC components with CMOS technology for the direct-conversion architecture. This research proposes noise reduction techniques to improve the thermal noise and flicker noise contribution of a low noise amplifier (LNA) and a mixer. Of these techniques, the LNA is found …

    gatech Repository record for Low noise RF CMOS receiver integrated circuits (opens in a new tab)

  2. Circuit Design And Reliability Of A Cmos Receiver

    This dissertation explores CMOS RF design and reliability for portable wireless receivers. The objective behind this research is to achieve an increase in integration level, and gain more understanding for RF reliability. The fields covered include device, circuit and system. What is under …

    ucf Repository record for Circuit Design And Reliability Of A Cmos Receiver (opens in a new tab)

  3. Development of RF CMOS receiver front-ends for ultrawideband

    … for the RF front-end designs in the UWB receivers, one is distributed topology, and the other is based on traditional lumped element topology. The distributed amplifier is one of the attractive candidates for UWB Low Noise Amplifier (LNA). The design, analysis and operation of the …

    tamu Repository record for Development of RF CMOS receiver front-ends for ultrawideband (opens in a new tab)

  4. A Reliable CMOS Receiver for Power Line Communications in Integrated Circuits

    … of power line communications in ICs. Several PLC receivers were developed to recover data superimposed on the power lines of an IC. This thesis research investigated a new PLC receiver to improve shortcomings of previous PLC receivers, specifically to improve the reliability while reducing power …

    vt Repository record for A Reliable CMOS Receiver for Power Line Communications in Integrated Circuits (opens in a new tab)

  5. CMOS Receiver Design for Optical Communications over the Data-Rate of 20 Gb/s

    … to extend operation data-rate of a optical receiver is investigated in the dissertation. A new input-stage topology for a transimpedance amplifier (TIA) is designed to achieve 50% higher data-rate is presented, and a new architecture for clock recovery is proposed for 50% higher clock rate. …

    vt Repository record for CMOS Receiver Design for Optical Communications over the Data-Rate of 20 Gb/s (opens in a new tab)

  6. A robust 2.4 GHz time-of-arrival based ranging system with sub-meter accuracy : feasibility study and realization of low power CMOS receiver

    Draadloze sensornetwerken worden meer en meer aangewend om verschillende soorten informatie te verzamelen. De locatie, waar deze informatie verzameld is, is een belangerijke eigenschap en voor sommige toepassingen, zoals het volgen van personen of goederen, zelfs de meest belangrijke en …

    ghent Repository record for A robust 2.4 GHz time-of-arrival based ranging system with sub-meter accuracy : feasibility study and realization of low power CMOS receiver (opens in a new tab)

  7. CMOS Transceiver Front-Ends in Mobile Communication Handsets - Architectures and Building Blocks

    … communication systems in the low-GHz range, CMOS has increasingly become the technology of choice, and the level of integration in mobile handsets has risen. The use of off-chip components, which increases the handset assembly time and costs, is preferably avoided. However, integrating a …

    lund Repository record for CMOS Transceiver Front-Ends in Mobile Communication Handsets - Architectures and Building Blocks (opens in a new tab) Download PDF for CMOS Transceiver Front-Ends in Mobile Communication Handsets - Architectures and Building Blocks (opens in a new tab)

  8. Low-power CMOS front-ends for wireless personal area networks

    … radio frequency circuits in deep sub-micron CMOS technology was investigated for developing low-power front-ends for wireless personal area network (WPAN) applications. It was found that the higher transconductance to bias current ratio in weak inversion could be exploited in developing …

    gatech Repository record for Low-power CMOS front-ends for wireless personal area networks (opens in a new tab)

  9. Electronics design for high density CMUT array based ultrasound imaging system

    … This research explores the design of the CMOS receiver circuitry which implements a Time Division Multiplexing (TDM) scheme to address the receive cable restrictions of the catheter. This approach, implemented in the form of a direct digital demultiplexing technique, allows for a reduction …

    gatech Repository record for Electronics design for high density CMUT array based ultrasound imaging system (opens in a new tab)

  10. Low-impedance CMOS optical receivers and substrate-mode holograms for optical interconnects.

    … for use as free-space interconnects and optical receivers compatible with CMOS systems are investigated. First, the switching characteristics of two basic CMOS receivers without a gain stage are investigated. A simple low-impedance load configuration for high-speed operation is introduced which …

    arizona-thes Repository record for Low-impedance CMOS optical receivers and substrate-mode holograms for optical interconnects. (opens in a new tab)

  11. Design Techniques for High Speed Optical Interconnects

    … for silicon photonic devices, while the CMOS transmitter is implemented in a 28nm coplanar technology node. Integration of the optical and electronic components is achieved through wire bonding. Experimental results demonstrate clear optical eye diagram openings at 80Gbps with bit error …

    tamu Repository record for Design Techniques for High Speed Optical Interconnects (opens in a new tab)

  12. Design Techniques for High Speed Optical Interconnects

    … for silicon photonic devices, while the CMOS transmitter is implemented in a 28nm coplanar technology node. Integration of the optical and electronic components is achieved through wire bonding. Experimental results demonstrate clear optical eye diagram openings at 80Gbps with bit error …

    tamu Repository record for Design Techniques for High Speed Optical Interconnects (opens in a new tab)

  13. Design Techniques for High Speed Optical Interconnects

    … for silicon photonic devices, while the CMOS transmitter is implemented in a 28nm coplanar technology node. Integration of the optical and electronic components is achieved through wire bonding. Experimental results demonstrate clear optical eye diagram openings at 80Gbps with bit error …

    tamu Repository record for Design Techniques for High Speed Optical Interconnects (opens in a new tab)

  14. Design Techniques for High Speed Optical Interconnects

    … for silicon photonic devices, while the CMOS transmitter is implemented in a 28nm coplanar technology node. Integration of the optical and electronic components is achieved through wire bonding. Experimental results demonstrate clear optical eye diagram openings at 80Gbps with bit error …

    tamu Repository record for Design Techniques for High Speed Optical Interconnects (opens in a new tab)

  15. Towards the Design of Robust High-Speed and Power Efficient Short Reach Photonic Links

    … photonics as it is compatible with current CMOS processes and creates many possibilities for short-reach applications. Many see optical interconnects as the high-speed link solution for applications ranging from intra-data center (~200 m) down to module or even chip scales (< 2 cm). The …

    concordia Download PDF for Towards the Design of Robust High-Speed and Power Efficient Short Reach Photonic Links (opens in a new tab)

  16. Low-power Multi-Gb/s Wireline Communication

    This thesis discusses low-power wireline receivers with particular focus on clocking circuitry and architectures. These clocking solutions can be used for a 1-D partial response channel as well as for a conventional DC coupled channel. The receiver front end for a 1-D channel requires more …

    toronto-retro Repository record for Low-power Multi-Gb/s Wireline Communication (opens in a new tab)

  17. A highly linear and low flicker-noise CMOS direct conversion receiver front-end for multiband applications

    … of a highly linear and low flicker-noise receiver front-end based on the direct conversion architecture for multiband applications in a CMOS technology. The dissertation consists of two parts: One, implementation of a highly linear RF receiver front-end and, two, implementation of a low …

    gatech Repository record for A highly linear and low flicker-noise CMOS direct conversion receiver front-end for multiband applications (opens in a new tab)