Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"CMOS-MEMS"”.
-
CMOS-MEMS Scanning Microwave Microscopy
… with strain-based piezoresistive AFM probes in a CMOS-MEMS process, and are actuated by integrated electrothermal scanners. Integration of AFM enables dual-mode imaging (topography and electrical properties); it also enables control over tip-sample distance, which is crucial for accurate SMM …
-
Millimeter-Wave Reconfigurable CMOS-MEMS Integrated Devices
… technologies, Micro-Electro-Mechanical Systems (MEMS) have the potential to realize reconfigurable millimeter-wave devices with superior performance in terms of linearity, insertion loss and DC power consumption. This thesis presents the development and fabrication of miniaturized, low insertion …
-
CMOS-MEMS Resonant Gate Transistor-Based Devices
… of modern Micro-Electro-Mechanical Systems (MEMS). Electrostatically-driven MEMS-based resonators are used in a vast range of applications, including sensors, high frequency filters, time reference signal generations, etc. However, with the resonance frequency continuously increasing and the …
-
Design, Fabrication and Validation of a CMOS-MEMS Kelvin Probe Force Microscope
… this microscope in batch, a post-processed CMOS-MEMS device is utilized. The polysilicon resistors act as a strain gauge such that a conventional optical system will not have to be employed. The ability to use integrated bimorph actuators on chip allow for movement of the cantilever without …
-
Reconfigurable Impedance Matching Networks Based on RF-MEMS and CMOS-MEMS Technologies
… of using RF microelectromechanical systems (RF-MEMS) technology to develop reconfigurable impedance matching networks. Different types of tunable impedance matching networks with improved impedance tuning range, power handling capability, and lower insertion loss have been developed. Another …
-
Electrochemical sensor system architecture using the CMOS-MEMS technology for cytometry applications
… for recording the parameters of blood cells. The CMOS based device consists of the two flow-through sensor arrays, stacked one on top of the other. The sensors are able to detect the biological cell in terms of its physical size and the surface charge on a cell’s membrane. The development of the …
-
Modeling and characterization of microelectromechanical systems condenser microphone
MEMS Condenser microphones are becoming a promising technology to substitute the current standard microphones as they have several benefits such as batch fabrication, integration feasibility, low noise level, stable frequency response and high sensitivity; so their demand is increasing and is …
-
Evaluation of Pixel-scale Tunable Fabry-Perot Filters for Optical Imaging
… We evaluate the performance of a novel tunable MEMS (Micro-Electro-Mechanical System) Fabry-Perot (FP) filter device intended to be monolithically integrated over each pixel of a focal plane array. This array of individually tunable FPIs have been designed to operate across the visible light …
-
Integrated CMOS Capacitance Sensor And Microactuator Control Circuits For On-Chip Cell Monitoring
"Cell Clinics," CMOS/MEMS hybrid microsystems for on-chip investigation of biological cells, are currently being engineered for a broad spectrum of applications including olfactory sensing, pathogen detection, cytotoxicity screening and biocompatibility characterization. In support of this effort, …
-
Design of analogue CMOS VLSI MEMS sensor : a dissertation presented in partial fulfillment of the requirements for the degree of Doctor of Philosophy in Engineering , Integrated Circuit Design at School of Engineering and Advanced Technology, Massey University, Albany campus
… system designs in the recent advanced CMOS technologies are explored in this work for effective system miniaturization and improved performance. The material choices and geometry designs, which significantly influence the sensitivity and dynamic range of the micro-scale sensor devices, …
-
Development of 3-D Printed Hybrid Packaging for GaAs-MEMS Oscillators based on Piezoelectrically-Transduced ZnO-on-SOI Micromechanical Resonators
Prior research focused on CMOS-MEMS integrated oscillator has been done using various foundry compatible integration techniques. In order to compensate the integration compatibility, MEMS resonators built on standard CMOS foundry process could not take full advantage of highest achievable quality …
-
Single-Chip Scanning Probe Microscopes
… image can be scaled and integrated onto a single CMOS chip. Principles of microsystem design are applied to produce single-chip instruments that acquire images of underlying samples on their own, without the need for off-chip scanners or sensors. Furthermore, it is shown that the instruments enjoy …
-
Novel RF MEMS Varactors Realized in Standard MEMS and CMOS Processes
Micro-Electro-Mechanical Systems (MEMS) varactors have the potential to replace conventional varactor diodes, due to their high loss and non-linearity, in many applications such as phase shifters, oscillators, and tunable filters. The objective of this thesis is to develop novel MEMS varactors to …
-
Mechanically flexible interconnects (MFIs) for large scale heterogeneous system integration
In this research, wafer-level flexible input/output interconnection technologies, Mechanically Flexible Interconnects (MFIs), have been developed. First, Au-NiW MFIs with 65 µm vertical elastic range of motion are designed and fabricated. The gold passivation layer is experimentally verified to not …
-
Nanocarbon/elastomer composites : characterization and applications in photo-mechanical actuation.
… / micro-electro-mechanical (CMOS/MEMS) compatible processing. Applications of photo-responsive materials encompass robotics, plastic motors, photonic switches, micro-grippers, and adaptive micro-mirrors. The magnitude and direction of photo-mechanical actuation responses …