Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 23 for “"CMSX-4"”.
-
Metal-Mold Reactions in CMSX-4 Single Crystal Superalloy Castings
… layers are often found on the surface of as-cast CMSX-4 single-crystal alloy parts. These layers cannot be removed prior to solution heat treatment of cast parts because of the sensitivity of the single-crystal castings to recrystallization (RX) defect formation. Removal of the reaction layer …
-
Comparative oxidation study of un-coated and coated CMSX- 4 and CMSX-486 single crystal superalloys
… Ni-5Cr-15Al overlay coating applied to CMSX-4 and CMSX-486 was performed at 1100 ℃. High temperature oxidation was carried out in a box furnace for a maximum duration of 192 hrs. Samples were periodically removed and the oxide, coating and substrates microstructurally analyzed using SEM, …
-
Mechanisms Of Lifetime Improvement In Thermal Barrier Coatings With Hf And/or Y Modification Of Cmsx-4 Superalloy Substrates
… (Ni,Pt)Al bond coat and Hf- and/or Y- modified CMSX-4 superalloy substrates were examined. Thermal cyclic lifetime of TBCs was measured using a furnace thermal cycle test that consisted of 10-minute heat-up, 50-minute dwell at 1135C, and 10-minute forced-air-quench. TBC lifetime was observed to …
-
Quantitative metallography tracking and analysis for the scanning laser epitaxy process applied to CMSX-4 and Rene-80 nickel-based superalloys
… for the types of microstructure found in CMSX-4 and Rene-80, specifically single crystal and equiaxed regions. The data fitting program uses optimally piecewise-fitted equations to find relationships between the SLE settings and the microstructure traits. The data is optimally piecewise …
-
Rafting, Recovery, and Recrystallization in Laser Peened Ni-Based Superalloys: Mechanistic Insights and Applications
… primary research areas: the induced rafting in CMSX-4 via laser peening (LP) and heat treatment, the high-temperature recovery and recrystallization (RX) behavior of shot peened (SPed) and LPed CMSX-4, and the strengthening mechanisms in LPed and annealed Inconel 617 (IN617).The first study …
-
Cyclic and Isothermal Oxidation Resistance of ASPS Thermal Barrier Coating Systems
… consisted of nickel-base superalloy substrate (CMSX-4 or IN738LC), platinum aluminide bond coat and 8YSZ top coat with either vertical cracks (VC) or columnar structure. Samples with IN738LC substrate demonstrated longer isothermal oxidation life whereas samples with CMSX-4 substrate showed …
-
Evolution Of Microstructure And Residual Stress In Disc-shape Eb-pvd Thermal Barrier Coatings And Temperature Profile Of High Pressure Turbine Blade
… coated ZrO2-7wt. %Y2O3, (Pt,Ni)Al bond coat, and CMSX-4 Ni-based superalloy. At specific fraction of lifetime, TBCs were examined by electron microscopy and photostimulated luminescence (PL). Changes in the average compressive residual stress of the TGO determined by PL and the magnitude of …
-
Progression of Hot Corrosion in Ni-base Superalloys for Industrial Gas Turbines
… Three of them are commercial alloys: CM247, CMSX-4 and Inconel 792; while the other three are alloys developed by Siemens, two of which are polycrystalline and the other one is a single crystal. Samples of all of the six alloys were exposed to a mixed-sulphur atmosphere at two different …
-
Oxidation-fatigue mechanisms at moderate service temperatures in single crystal turbine blade materials
… single crystal nickel based superalloys (in CMSX-4 and MD-2) has been investigated at the lower operating temperature range (450-550ºC) of an industrial gas turbine blade. Isothermal oxidation was carried out for varying times up to 640h and it was found that exposure resulted in a sub-micron …
-
Transient thermo-mechanical response and failure in selected turbine cooling geometries
… distributions were evaluated for Inconel 625 and CMSX-4 coupons. The predicted crack initiation location for circular holes was confirmed at film hole wedges for most components. The results showed a negligible dependence on the thermal gradient, normal to the coupon, in determining crack …
-
Modelling of laser repair of single crystal nickel based superalloys
… of commercial single crystal superalloys, i.e. CMSX-4, main concern is put on the simulation process of heat and mass transfer, so that relationship of laser, powder injection and substrate has been studied and predicted; moreover, defining processing parameters, correlation between …
-
Ultrasonic assisted creep feed grinding and dressing of advanced aerospace alloys
… aeroengine alloys, in particular Inconel 718, CMSX-4 and gamma titanium aluminide (γ-TiAl). For tests with ultrasonic vibration, workpieces were actuated at a constant frequency (~20kHz) via a specially designed block sonotrode attached to a 1kW piezoelectric transducer-generator system. The …
-
Transient liquid phase bonding of dissimilar single crystal superalloys
… during the joining of nickel-based IN738 and CMSX-4 single crystal (SX) superalloys. An increase in holding time and reduction in gap size reduces the width of eutectic product that forms within the joint region. It was also found that Liquid-state diffusion (LSD) can occur and have …
-
Towards inert cores for investment casting
… increase the retention of reactive elements in CMSX-4.
-
The effect of bond coat oxidation on the microstructure and endurance of two thermal barrier coating systems
… thermal barrier coating systems consisting of a CMSX-4 nickel-based superalloy substrate, NiCoCrAlY overlay bond coat applied by two different techniques and a yttria stabilised zirconia topcoat applied by electron beam physical vapour deposition (EBPVD). The bond coats were applied by either …
-
Investigation of the effect of hafnium and chromium additions on the microstructures and short-term oxidation properties of DC magnetron sputtered β-nial bond coats deposited on Ni-based superalloys
… via direct current magnetron sputtering onto CMSX-4 and René N5 substrates. Sputtering parameters were optimized to yield a zone T microstructure. The results indicate that the coatings are deposited as a solid solution and precipitation with the RE-doped coatings occur following annealing at …
-
Environmental & orientation effects on the ultrasonic fatigue of a single-crystal nickel superalloy
… was used to assess the fatigue performance of CMSX-4 from 10<sup>4</sup> to 10<sup>9</sup> cycles to failure, generating S-N curves.</p> <p>The small-scale nature of the samples with this ultrasonic fatigue method allowed for the novel investigation of the fatigue crack initiation behaviour …
-
Constitutive modeling of creep of single crystal superalloys
… well with the available experimental data for CMSX-4. The constitutive model is also imple- mented as a User Material (UMAT) in commercial finite element software ABAQUS to enable the analysis of more general problems. The UMAT is validated for simple problems and the numerical scheme based on …
-
Correlating Microstructural Development And Failure Mechanisms To Photo Stimulated Luminescence Spectroscopy And Electrochemical Impedance Spectroscopy In Thermal Barrier Coatings
… of NiCoCrAlY and (Ni,Pt)Al, and superalloys of CMSX-4, Rene‟N5, Haynes 230 and MAR-M-509. Detailed microstructural characterization by scanning electron microscopy and energy dispersive spectroscopy was carried out to document the degradation and failure characteristics of TBC failure, and …
Page 1 of 2