Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 94 for “"COMPRESSIVE STRENGTH OF CONCRETE"”.
-
The effect of air entrainment upon compressive strength of concrete
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1948
-
Effect upon the compressive strength of concrete by eliminating curing water
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science, 1927
-
Wash water in the mix: Effects on the compressive strength of concrete
Beginning with the Water Quality Act of 1987, requirements were put in place to control sediment run off from construction sites, which typically meant silt fences were installed and maintained on job sites. In 2009, when Aggregate Industries was fined $2.7 million by the Environmental Protection …
-
Developing an Artificial Intelligence Model for Estimating the Compressive Strength of Concrete Based on Combined Non-Destructive Test Results
The most important mechanical property of concrete for design and evaluation is its compressive strength, which, for new structures, is typically determined by breaking cylindrical or cubic concrete specimens under uniaxial load in controlled laboratory conditions. The accurate and quick evaluation …
-
Development length equation for high-strength materials
The goal of this study was to revise the development length equation of ACI 318- 05 and to better reflect test results for high-strength concrete. The revision of the equation was accomplished using test results tabulated in the Database 10-2001maintained by ACI committee 408. Equations for …
-
Applied computational analyses for concrete compressive strength performance assessment
The compressive strength of concrete represents a significant essential mechanical property, measured for any given concrete mixture. Traditional methods in form of destructive test methods are used in assessing the strength of concrete. However, concrete strength is influenced by numerous …
-
The Compressive And Flexural Strength Of Concrete Containing Recycled Waste Plastic
Annually, tons of plastic wastes end up in landfills and the oceans through indiscriminate dumping, constituting a major source of pollution to the environment and threat to human health and marine lives. It therefore necessitates an innovative strategy to help mitigate the environmental hazards …
-
PILE CAPS SUPPORTED ON THREE CO-PANAR PILES
Reinforced concrete pile caps are designed based on either beam theory or truss theory. Truss theory has already been applied to pile caps with up to five piles. However, pile caps supported on three co-planar piles are designed using only beam theory in current practice because no truss model is …
-
Theoretical evaluation of the break off test for concrete
Strength of concrete is normally measured using the standard cylinder or cube. The measured strength is used for design. The accuracy of concrete strength is frequently challenged, particularly in large concrete structures where size effect of the test specimens is attributed for the differences. …
-
Structural behaviour of precast component joints with loop connection
This thesis presents a systematic study on the strength of flexural and tensile joints with loop connections. Experimental investigations of test specimens with insitu joints as well as monolithic specimens, reinforced either with one to one horizontal or two to one vertical loop connections, were …
-
Effect of transient high temperature on high-strength concrete
The effect of transient high temperature in the uniaxial compressive strength of high strength concrete was investigated. The temperatures studied varied from 100$\sp\circ$ to 800$\sp\circ$C. The presence of loads in a structure was simulated by preloading the test specimens during the heating …
-
Performance of circular high-strength concrete columns under lateral load reversals.
In recent years, high-strength concrete (HSC) has gained a more widespread acceptance in the construction industry. In spite of the advantages inherent to HSC, concerns still exist about its relative brittleness, particularly in regions of high seismic risk. An experimental and analytical …
-
The Influence of Water-Reducing Admixtures on the Curing of Concrete
The use of water-reducing admixtures in concrete has grown continuously since their introduction over 25 years ago, with a present estimated usage in the production of 25 million cubic yards of concrete annually in the United States alone. Opposition to anything added to concrete, other than …
-
Evaluation of stay-in-place PVC-formed concrete walls for blast design
[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] In the event of a blast, concrete might not have the toughness needed to absorb the large amounts of energy imparted, even with the moderate steel reinforcement present in many such walls. If the concrete is used as a composite …
-
Bayesian prediction of modulus of elasticity of self consolidated concrete
Current models of the modulus of elasticity, E , of concrete recommended by the American Concrete Institute (ACI) and the American Association of State Highway and Transportation Officials (AASHTO) are derived only for normally vibrated concrete (NVC). Because self consolidated concrete (SCC) …
-
Interaction of environment and size on the drying shrinkage and creep of concrete.
… investigation into the joint interaction of environment, specimen size, duration of moist curing on shrinkage and creep. The different environments investigated are: (a) constant temperature conditions in a laboratory, uncontrolled relative humidity, (b) in a room of 50% relative humidity …
-
A critical review of the symmetric punching shear of reinforced concrete flat slabs.
… punching shear load depends on the shape of the loaded area, the compressive strength of concrete, the flexural reinforcement ratio and on the arrangement of steel bars. Punching failure follows the formation of an inclined failure surface from the edge of the loaded area to the opposite …
-
Influence of Concrete Compressive Strength on Transfer and Development Lengths of Prestressed Concrete
This research examines the relationship between concrete compressive strength and strand bond. The goal of this research was to develop an equation that relates strand bond to concrete compressive strength at strand release (approximately 1 day of age) and at 28 days of age, and those equations are …
Page 1 of 5