Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 84 for “"COMSOL MultiPhysics®"”.

  1. Electromagnetic Probe and Driving Circuit Design for Micro Magnetic Stimulation of Small Animal Brains

    … tip was determined by analytical calculation and COMSOL Multiphysics® finite element simulation. A prototype probe was fabricated and the induced electrical field of the probe was measured combining with the magnetic stimulation circuit and an electrical field detector. For brains of some small …

    tamu Repository record for Electromagnetic Probe and Driving Circuit Design for Micro Magnetic Stimulation of Small Animal Brains (opens in a new tab)

  2. A Multiphysics Simulation of a Coronary Artery

    … hypothesizes that a commercially available multiphysics simulation software package can be easily employed to characterize the fluid flow and mechanical behavior in healthy and diseased arteries. To this end, multiphysics model of a coronary artery —the LAD artery—was created in COMSOL …

    calpoly Repository record for A Multiphysics Simulation of a Coronary Artery (opens in a new tab)

  3. Fluid Flow Characterization and In Silico Validation in a Rapid Prototyped Abdominal Aortic Aneurysm Model

    … the velocity of the fluid within the aneurysm. COMSOL Multiphysics® was used to create a computational model of the same aneurysm, as well as obtain velocity measurements to statistically compare to those from the physical construct. There was no significant difference between the velocity …

    calpoly Repository record for Fluid Flow Characterization and In Silico Validation in a Rapid Prototyped Abdominal Aortic Aneurysm Model (opens in a new tab)

  4. Fabrication, characterisation and electroanalysis at 1-dimensional nanostructures

    … of electrode designs were undertaken using Comsol Multiphysics®. Sensor devices were fabricated and corresponding experiments were performed to challenge simulation results. Two approaches for the fabrication and integration of metal nanowire electrodes are presented: Template …

    cork Repository record for Fabrication, characterisation and electroanalysis at 1-dimensional nanostructures (opens in a new tab)

  5. Fluid Flow Characterization and In Silico Validation in a Rapid Prototyped Aortic Arch Model

    … silico model using the finite elements program COMSOL MultiPhysics® Modeling Software. The physical model was created from a patient CT scan of the aortic arch using additive manufacturing (3D printing) and polymer casting, resulting in the shape of the aortic arch within a transparent, silicone …

    calpoly Repository record for Fluid Flow Characterization and In Silico Validation in a Rapid Prototyped Aortic Arch Model (opens in a new tab)

  6. Laser Modified Alumina: a Computational and Experimental Analysis

    … order to enhance its abrasive characteristics. COMSOL Multiphysics® based heat transfer modeling and experimental approaches were designed and used in this study for single and multiple laser tracks to achieve densely-packed multi-facet grains via temperature history, cooling rate, …

    unt Repository record for Laser Modified Alumina: a Computational and Experimental Analysis (opens in a new tab)

  7. Plasma Enhanced Chemical Vapor Deposition of Metal-Boride Interfacial Layers as Diffusion Barriers for Nanostructured Diamond Growth on Cobalt Containing Alloys CoCrMo and WC-Co

    … modeling of the MPECVD process, through the COMSOL Multiphysics® platform, is performed to provide insight into plasma-surface interactions using the simulation of a real-world apparatus. Experimental investigation of MPECVD boriding and NSD deposition was conducted at surface temperatures …

    uab Repository record for Plasma Enhanced Chemical Vapor Deposition of Metal-Boride Interfacial Layers as Diffusion Barriers for Nanostructured Diamond Growth on Cobalt Containing Alloys CoCrMo and WC-Co (opens in a new tab)

  8. Development of a load inductor in a single pulse test circuit

    … single pulse test circuit are implemented in the COMSOL Multiphysics® program in order to make a comparison of the magnetic field and to investigate the disturbance of both type of the inductors on the test results of the single pulse test circuit. According to the test results and the comparison …

    chalmers Repository record for Development of a load inductor in a single pulse test circuit (opens in a new tab)

  9. Silicon Integration of “Lab-on-a-Chip” Dielectrophoresis Devices

    … gradients was made using video microscopy and COMSOL Multiphysics ® simulations.

    manitoba Repository record for Silicon Integration of “Lab-on-a-Chip” Dielectrophoresis Devices (opens in a new tab)

  10. Modeling and Measuring the Characteristics of an Inductively Coupled Plasma Antenna for a Micro-Propulsion System

    … The antenna has been modeled using COMSOL Multiphysics® Simulation Software. By changing the geometry of the antenna in the model, the antenna design has been analyzed and improved. Two new antenna designs have been fabricated. The simulation results are compared to measurements of …

    boise Repository record for Modeling and Measuring the Characteristics of an Inductively Coupled Plasma Antenna for a Micro-Propulsion System (opens in a new tab)

  11. Melting and solidification of PCM and PCM-expanded graphite composite using toroidal tube heat exchanges

    … novel toroidal tube heat exchanger geometries. COMSOL Multiphysics® is used for numerical simulation, and in total, 118 cases have been investigated. The thermal performance is evaluated in terms of (i) melt/solid fraction, (ii) energy stored/released by PCM/CPCM, (iii) average PCM/CPCM …

    guelph Repository record for Melting and solidification of PCM and PCM-expanded graphite composite using toroidal tube heat exchanges (opens in a new tab)

  12. COMPUTATIONAL MODELING OF MICROBIAL BIOFILM AND GLYCEROL FUEL CELL USING COMSOL

    … simulated through advanced systems modeling in COMSOL Multiphysics® software package and validated by comparison to experimental results. These works may have significant impact on the academic world through their contribution to health, medical, renewable energy and chemical fields.

    mtu Repository record for COMPUTATIONAL MODELING OF MICROBIAL BIOFILM AND GLYCEROL FUEL CELL USING COMSOL (opens in a new tab)

  13. Application of thermal methods to enhanced oil recovery

    … software were used for this purpose and namely; Comsol Multiphysics® and CMG® (Computer Modelling Group). The dissertation can be classified into three parts and all of them are standalone that discuss different topics within TEOR. The work starts with reviewing enhanced oil recovery (EOR) …

    qucosa-diss

  14. Multi-level filter based on H shaped channels

    … of angular H shaped channels was studied with COMSOL Multiphysics® Modeling Software.

    birmingham Download PDF for Multi-level filter based on H shaped channels (opens in a new tab)

  15. Influence of temperature gradients on the sound field in ice hockey halls

    … temperature gradient estimation. Additionally, COMSOL Multiphysics® is used to simulate one of the halls in order to showcase the effects of refraction and calculate the reverberation time. Finally, measurement and simulation results are compared for the case with and without ice on the ground …

    chalmers Repository record for Influence of temperature gradients on the sound field in ice hockey halls (opens in a new tab)

  16. Simulation of induction welding process for glass fiber thermoplastic composites in aerospace applications

    … polyetherimide (GF/PEI) is developed using the COMSOL Multiphysics® software. The model takes into account a stainless steel mesh net susceptor placed at the welding interface of the two adherends to be welded. The eddy-currents in the susceptor being generated by time-varying external magnetic …

    chalmers Repository record for Simulation of induction welding process for glass fiber thermoplastic composites in aerospace applications (opens in a new tab)

  17. Modellierung und Simulation von stimuli-responsiven Hydrogelen unter Verwendung des poromechanischen Frameworks

    … Durch die Implementierung des Modells in COMSOL Multiphysics® wird das zeitliche Quellungsverhalten von Hydrogelen mit unterschiedlichen Stimuli numerisch untersucht. Die zugehörigen Materialparameter wurden aus experimentellen Daten erworben. In dieser Arbeit wird ein …

    qucosa-diss

  18. PCM Integrated Space Heating and Cooling and Cryo-Electrohydrodynamic Dehydration System for Food Processing Applications

    … A numerical model was produced using COMSOL Multiphysics® to examine the effect of C-EHD on the drying rate and energy consumption for different porous media. The main variables under investigation include, wind velocity, electrode configuration, applied voltage, and electrode gap. In …

    guelph Repository record for PCM Integrated Space Heating and Cooling and Cryo-Electrohydrodynamic Dehydration System for Food Processing Applications (opens in a new tab)

  19. Simulating the Electron Optics of an Electron Beam Manufacturing 3D Printer

    … the lens system has been built and evaluated in COMSOL Multiphysics®. Using the Finite Element Method (FEM) and Time Step Particle Tracing it was possible to simulate the electron trajectories in 25 min. The computational time was substantially reduced by approximating certain calculations and …

    chalmers Repository record for Simulating the Electron Optics of an Electron Beam Manufacturing 3D Printer (opens in a new tab)

  20. Porous Nanostructured 4Ï€ Neutron Conversion Layers for Improved Sensitivity and Gamma-Ray Rejection in Gas-Filled Radiation Detectors

    … of the proposed detector was performed using COMSOL Multiphysics® with additional particle tracking predictions using SRIM/TRIM model computations. This work included neutron sensitivity evaluation, pulse shaping considerations, mitigation of adverse charging effects, gamma discrimination …

    clemson Repository record for Porous Nanostructured 4Ï€ Neutron Conversion Layers for Improved Sensitivity and Gamma-Ray Rejection in Gas-Filled Radiation Detectors (opens in a new tab)

Page 1 of 5