Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 80 for “"CONTACT RESISTIVITY"”.

  1. Effect of Transmission Line Measurement (TLM) Geometry on Specific Contact Resistivity Determination

    Ohmic metal semiconductor contacts are indispensable part of a semiconductor device. These are characterized by their specific contact resistivity (ρ_c) in expressed in Ohm-cm^2, defined as the inverse slope of current density versus voltage curve at origin. Engineering and measurement of specific …

    rit Repository record for Effect of Transmission Line Measurement (TLM) Geometry on Specific Contact Resistivity Determination (opens in a new tab)

  2. Modeling and Electrical Characterization of Ohmic Contacts on n-type GaN

    … operation and efficient performance. The metal contacts on semiconductors are essential as the interface properties affect the semiconductor performance and device operation. The low resistance ohmic contacts for n-GaN have been well established while most p-GaN devices have still high contact …

    vt Repository record for Modeling and Electrical Characterization of Ohmic Contacts on n-type GaN (opens in a new tab)

  3. ADVANCED SOURCE AND DRAIN CONTACT ENGINEERING FOR GERMANIUM-TIN AND SILICON-GERMANIUM TRANSISTORS

    … Besides, a sub-1e-9 ohm-cm^2 specific contact resistivity is required in future to alleviate the impact of high contact resistance. Firstly, LTLM with the capability of eliminating parasitic metal resistance was experimentally verified on Ni/p-GeSn and Ti/p-GeSn contacts. Then, a …

    nus Repository record for ADVANCED SOURCE AND DRAIN CONTACT ENGINEERING FOR GERMANIUM-TIN AND SILICON-GERMANIUM TRANSISTORS (opens in a new tab) Download file for ADVANCED SOURCE AND DRAIN CONTACT ENGINEERING FOR GERMANIUM-TIN AND SILICON-GERMANIUM TRANSISTORS (opens in a new tab)

  4. Contact and source/drain engineering for advanced III-V field-effect transistors

    … fins and small nanowire diameters. Therefore, contact technologies that can provide good ohmic contacts with low contact resistivity, and doping techniques that can provide abrupt, high-quality, ultra-shallow junctions with high doping concentration and conformal doping in the source/drain …

    nus Repository record for Contact and source/drain engineering for advanced III-V field-effect transistors (opens in a new tab) Download file for Contact and source/drain engineering for advanced III-V field-effect transistors (opens in a new tab)

  5. Characterizing point contacting by localized dielectric breakdown and its use in Silicon Solar Cell Applications

    A self-aligned, room temperature contacting method, point-contacting by dielectric breakdown (PLDB) was developed. PLDB method utilizes dielectric breakdown above a locally doped region to form ohmic contacts for a solar cell rear surface. Combined with laser doping, room temperature metallization …

    unsw Repository record for Characterizing point contacting by localized dielectric breakdown and its use in Silicon Solar Cell Applications (opens in a new tab)

  6. Lowering Contact Resistance of Boron-Doped Diamond using Pulsed Laser Annealing for Next-Generation Ultra-Wide Bandgap Semiconductor Devices

    Low-resistance ohmic contacts are essential for high-power and high-frequency ultra-wide bandgap (UWBG) semiconductor devices. Diamond is a promising material due to its exceptional thermal stability, high conductivity, UWBG (5.47 eV), and chemical inertness. However, UWBG leads to highly resistive …

    texas-state Repository record for Lowering Contact Resistance of Boron-Doped Diamond using Pulsed Laser Annealing for Next-Generation Ultra-Wide Bandgap Semiconductor Devices (opens in a new tab)

  7. Encapsulant characterization and doped passivated contacts for use in a luminescent solar concentrator

    … fabrication of passivated interdigitated back contact silicon solar cells using spin-on dopants for use in a luminescent solar concentrator. For the luminescent solar concentrator to be successful, the encapsulants used to assemble the final device must not contribute to optical losses and the …

    colo-mines Repository record for Encapsulant characterization and doped passivated contacts for use in a luminescent solar concentrator (opens in a new tab)

  8. Graphene as Transparent Conductive Film for GaN-Based Vertical Cavity Surface Emitting Lasers

    … production of VCSELs. Because of the high resistivity of p-GaN, these devices require the use of a transparent conductive film (TCF) to effectively laterally spread the current across the active region. The actual material used so far is ITO wish has problems related to the deposition …

    chalmers Repository record for Graphene as Transparent Conductive Film for GaN-Based Vertical Cavity Surface Emitting Lasers (opens in a new tab)

  9. Improved carrier selectivity of diffused silicon wafer solar cells

    … efficiencies, by reducing the losses at the contacted and non-contacted surfaces. The carrier conductivity at the metal-silicon contact was investigated for both heavily doped n+ and p+ silicon. For diffused n+ electron collectors, it was shown that thin layers (<5 nm) of aluminium oxide …

    unsw Repository record for Improved carrier selectivity of diffused silicon wafer solar cells (opens in a new tab)

  10. Study of Surface Passivation Behavior of Crystalline Silicon Solar Cells

    … Typically, the substrate surfaces feature contacted and uncontacted regions, and recombination should be limited for both to maximize the energy conversion efficiency. Uncontacted silicon surfaces are often passivated by the deposition of silicon nitride (SiNx) or an aluminum oxide film …

    ucf Repository record for Study of Surface Passivation Behavior of Crystalline Silicon Solar Cells (opens in a new tab)

  11. Numerical modelling of lightning strikes to wind turbine blades: analysis of equipotential bonding for CFRP spars

    … was established to determine the electrical contact resistivity of EB joints. Besides, the thermal degradation of a commercial epoxy was studied to determine its reaction kinetics. The developed FEM models solve a weakly coupled formulation of the electromagnetic-thermal problem to predict …

    soton Download PDF for Numerical modelling of lightning strikes to wind turbine blades: analysis of equipotential bonding for CFRP spars (opens in a new tab)

  12. Computational study of advanced semiconducting materials for next-generation electronic devices

    … high dopant activation and insufficiently low contact resistivity for InGaAs, and strong degree of dopant segregation towards the surface for Ga2O3. In this thesis, we address these challenges with a computational modeling approach, based on ab initio density functional theory calculations. Our …

    cornell Repository record for Computational study of advanced semiconducting materials for next-generation electronic devices (opens in a new tab)

  13. Au-free Ohmic Contacts to Gallium Nitride and Graphene

    This work deals with Au-free contact metallization schemes for gallium nitride (GaN) and graphene semiconductors. Graphene and gallium nitride are promising materials that can potentially be integrated together in the near future for high frequency high power applications. Realizing and optimizing …

    tamu Repository record for Au-free Ohmic Contacts to Gallium Nitride and Graphene (opens in a new tab)

  14. High Tc superconductors and the contact properties

    … <p>Two kinds of design of reactive metal contacts have been proposed and investigated, aiming to make low resistivity contacts with strong mechanical strength. Three possible reactive contact metals have been tested for contact making, and the microstructures at the interfaces have been …

    oxford Repository record for High Tc superconductors and the contact properties (opens in a new tab)

  15. Germanium on silicon photonic devices

    … It has been extremely difficult to form an Ohmic contact to n-Ge due to Fermi level pinning just above the Valence band. A low temperature nickel process has been developed that produces Ohmic contacts to n-Ge with a specific contact resistivity of , which to date is a record. The low contact …

    glasgow Download PDF for Germanium on silicon photonic devices (opens in a new tab)

  16. Implementing sputter-deposited transparent conductive metal oxides into passivating contacts for silicon solar cells

    … conductive oxide (TCO) films for passivating contact systems of silicon (Si) solar cells. The two currently most considered passivating contact technologies, Si heterojunction (SHJ) based on hydrogenated amorphous Si (a-Si:H) and poly-Si / SiOx based contacts are addressed. Due to the lack of …

    freiburg-diss Repository record for Implementing sputter-deposited transparent conductive metal oxides into passivating contacts for silicon solar cells (opens in a new tab)

  17. Application-oriented Studies on Mg3Sb2 Thermoelectrics: Property, Stability, Contact, and Device

    … optimization, thermal stability enhancement, contact layer design, and device preparation. We first attempted to improve the thermoelectric performance of n-type Mg3SbBi for low-grade heat recovery by incorporating multi-walled carbon nanotubes. The composite showed a significant reduction in …

    houston Repository record for Application-oriented Studies on Mg3Sb2 Thermoelectrics: Property, Stability, Contact, and Device (opens in a new tab)

Page 1 of 4