Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 676 for “"CRACK TIP"”.

  1. TEM crack tip investigations of SCC

    … TEM has become a powerful technique to study cracks and specially crack tips. However, the number of publications including TEM results has not grown as it was expected. The main reason for this might be difficulties in the sample preparation. In this work we present a novel FIB sample …

    oxford Repository record for TEM crack tip investigations of SCC (opens in a new tab)

  2. The edge crack-tip behavior of nitinol

    … stress, σM [subscript f]. Placing a crack on the edge of a nitinol plate causes stress concentrations at the base of the crack. These high stresses in turn cause a change in the elastic modulus in a region around the crack. To determine this region, an analytic model of the elastic …

    iastate Repository record for The edge crack-tip behavior of nitinol (opens in a new tab)

  3. Full-field modelling of crack tip shielding phenomena

    … of the causes and mechanisms of failure and crack growth. Despite this, there are still some aspects that remain incompletely understood, such as the crack closure/crack shielding effect. The presence of crack closure/shielding acts to reduce . The mechanisms of crack closure/shielding are …

    plymouth Repository record for Full-field modelling of crack tip shielding phenomena (opens in a new tab)

  4. Inhibiting corrosion cracking : microstrain at the crack tip

    Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics, and Materials Science, 1986

    msu Repository record for Inhibiting corrosion cracking : microstrain at the crack tip (opens in a new tab)

  5. Experimental crack tip characterization for closed cell aluminum foam

    … exponentially dependent in the distance from the crack tip center. Such trend is especially present in the localized deformation band. The deviatoric-strain-field is similar to an HRR- type crack-tip-field undergoing Mode-1 plane strain deformation. The mean-strain-field arises from the pressure …

    iastate Repository record for Experimental crack tip characterization for closed cell aluminum foam (opens in a new tab)

  6. Atomistic modeling of crack tip behavior in ductile materials

    … mechanisms governing the near threshold fatigue crack growth phenomenon. First, by harnessing a concurrent multiscale approach and contemporary computational resources, fatigue crack simulations with cycle counts well beyond those analyzed previously have been performed. The validity of …

    cornell Repository record for Atomistic modeling of crack tip behavior in ductile materials (opens in a new tab)

  7. Mode II crack tip behavior in shape memory alloy Nitinol

    … transformation. The region ahead of a crack tip has rapidly changing stress field, which will cause the martensitic transformation. One shape memory alloy, nitinol, is studied in this work to find out the boundary where the phase changes occur. To solve the problem, fracture mechanics …

    iastate Repository record for Mode II crack tip behavior in shape memory alloy Nitinol (opens in a new tab)

  8. Atomistic Modeling Predictions Of Crack Tip Behavior In Silicon Carbide

    … papers detailing work intended to model the crack tip behavior in silicon carbide (SiC). While having impressive thermal, mechanical, and electrical properties, the utility of SiC as a structural material is often limited by its low fracture toughness. My studies focus on the application of …

    cornell Repository record for Atomistic Modeling Predictions Of Crack Tip Behavior In Silicon Carbide (opens in a new tab)

  9. High-Resolution Characterization of Micro-Scale Crack Tip Fields in Zirconium

    … of plastic deformation ahead of a microscale crack tip. The advantages of HR-EBSD in measuring fine-scale dislocation structures are also described. Chapter V analyzes the elastic field ahead of a microscale crack in Zr with HR-EBSD. The experimental results are compared with CPFE models to …

    queens Repository record for High-Resolution Characterization of Micro-Scale Crack Tip Fields in Zirconium (opens in a new tab)

  10. Crack tip plasticity in mixed mode loading under contained yielding conditions

    Mode I, mode II and mixed mode I/II asymptotic crack tip fields have been studied under contained yielding conditions using plane strain and plane stress boundary layer formulations. The effect of the non-singular term in the asymptotic elastic expansion (Williams, 1957) on the plastic zone at the …

    glasgow Download PDF for Crack tip plasticity in mixed mode loading under contained yielding conditions (opens in a new tab)

  11. Modeling of crack tip high inertia zone in dynamic brittle fracture

    … constitutive law (by Roy and Dodds) to model the crack tip high inertia region proposed by Gao. The new term is attributed to fracture mechanisms that result in high energy dissipation around the crack tip and is assumed to be a function of external energy per volume input into the system. Finite …

    tamu Repository record for Modeling of crack tip high inertia zone in dynamic brittle fracture (opens in a new tab)

  12. Fracture Toughness Scaling Model to Assess Changes in Crack-tip Constraint

    The crack-tip constraint is defined as the resistance of a structure to plastic deformation around the crack tip. It can affect the fracture toughness significantly. A loss of crack-tip constraint can cause an increase in fracture toughness. To make the best use of the low-constraint components and …

    bristol Repository record for Fracture Toughness Scaling Model to Assess Changes in Crack-tip Constraint (opens in a new tab) Download PDF for Fracture Toughness Scaling Model to Assess Changes in Crack-tip Constraint (opens in a new tab)

  13. Some non-linear aspects of crack-tip fields in finite elasticity

    Thesis (Ph. D.)--Michigan State University. Department of Metallurgy, Mechanics, and Materials Science, 1985

    msu Repository record for Some non-linear aspects of crack-tip fields in finite elasticity (opens in a new tab)

  14. Crack Tip Micromaching by Femtosecond Laser for Fracture Testing of Metal Laminates

    … is a viable method for creating artificial cracks for SEM in-situ mini cantilever fracture testing. A parameter space is defined to attempt to capture an acceptable set of laser settings which both reduce the heat affected zone and create an etched geometry mimicking a crack into the sample …

    unm Repository record for Crack Tip Micromaching by Femtosecond Laser for Fracture Testing of Metal Laminates (opens in a new tab)

  15. Processing improvement of Moiré interferometry for accurate crack-tip deformation measurement.

    … fields with higher sensitivity at the crack tip area. A single edge notched bend specimen was used in the experiment and the result was compared to numerical analysis using the finite element software package ABAQUS TM. The comparison of the crack-tip principal and effective strains …

    wvu Repository record for Processing improvement of Moiré interferometry for accurate crack-tip deformation measurement. (opens in a new tab)

  16. The effects of constraint on three dimensional elastic-plastic crack tip fields

    Detailed finite element analysis of the near tip region of a thin plate has revealed strong three-dimensional effects at the crack front. The field exhibits a gradual loss of plane strain conditions through the thickness which changes with increasing levels of deformation. A strain concentration is …

    glasgow Repository record for The effects of constraint on three dimensional elastic-plastic crack tip fields (opens in a new tab) Download PDF for The effects of constraint on three dimensional elastic-plastic crack tip fields (opens in a new tab)

  17. NUMERICAL SOLUTIONS FOR FINITE STRAIN CRACK TIP FIELDS IN SOFT INCOMPRESSIBLE SOLIDS

    … concerns itself with problems involving cracks under finite deformation in incompressible hyperelastic materials with special application to soft materials. The main focus is on using numerical methods, in particular the finite element method (FEM), to find the solution of crack tip …

    cornell Repository record for NUMERICAL SOLUTIONS FOR FINITE STRAIN CRACK TIP FIELDS IN SOFT INCOMPRESSIBLE SOLIDS (opens in a new tab)

  18. A numberical study of local crack-tip fields for modeling cleavage fracture initiation

    <p>The prediction of cleavage crack initiation in large-scale wide plate (WP) specimens from small (CT) specimens utilizing linear elastic fracture mechanics methodology has not been effective. In the wide-plate tests conducted by the Heavy-Section Steel Technology Program at Oak Ridge National …

    ut-knoxville Repository record for A numberical study of local crack-tip fields for modeling cleavage fracture initiation (opens in a new tab)

Page 1 of 34