Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 8 of 8 for “"CSMR"”.
-
Chloride Sulfate Mass Ratio (CSMR) and Nitrate Acceleration of Galvanic Lead- Bearing Solder Corrosion
… The impact of chloride-to-sulfate mass ratio (CSMR) on lead leaching from 50:50 lead:tin solder galvanically coupled to copper was examined at the bench scale.The CSMR can be affected by coagulant changeover, use of desalinated water, anion exchange, brine leaks, and other treatment changes. …
-
Regression-based Clustering Under High Dimensional Settings
… called Component-wise Sparse Mixture Regression (CSMR). CSMR was recently shown to outperform competing regression-based clustering methods and the authors proclaimed that CSMR is poised to handle high-dimensional data given it use of Lasso-penalized regression models embedded within the CSMR …
-
The Effect of Selected Coagulants on Chloride-to-Sulfate Mass Ratio for Lead Control and on Organics Removal in Two Source Waters
… known as the chloride-to-sulfate mass ratio (CSMR) in controlling lead release. A ratio above 0.5 – 0.6 theoretically increases the aggressiveness of lead leaching in galvanic settings, while a lower ratio controls lead corrosion. A switch in coagulant type could significantly alter the ratio. …
-
Lead Solder Contamination of Drinking Water: Water Corrosivity, Inhibition, and Limitations to Existing Understanding
… based on chloride to sulfate mass ratio (CSMR) and nitrate. Eight waters, four of which consisted of 10 mg/L sulfate at 0.8, 1, 4.8, and 41 CSMR, and the other four consisted of 100 mg/L sulfate at 0.3, 0.5, 4.1, and 38 CSMR, were synthesized and tested with copper and lead-tin solder …
-
Galvanic Lead Corrosion in Potable Water: Mechanisms, Water Quality Impacts, and Practical Implications
… in water, a chloride-to-sulfate mass ratio (CSMR) above 0.77 results in more chloride than sulfate transported to the lead anode surface, whereas the converse occurs below this CSMR. Bicarbonate can compete with chloride transport and buffer the pH, providing benefits to lead corrosion. …
-
Comparing Ferrous Chloride and Ferrous Sulfate as Secondary Coagulants at the Beaver Water District Drinking Water Treatment Plant
… carbon (DOC), chloride to sulfate mass ratio (CSMR), solids settleability, and water filterability were assessed in laboratory scale bench tests and pilot plant studies as a function of percent alum dose reduction (ADR). Results from bench scale jar tests and pilot plant study showed that …
-
Evaluation of Zinc Orthophosphate to Control Lead Solder Corrosion in Waters With High Chloride to Sulfate Mass Ratio
… can increase the chloride-to-sulfate mass ratio (CSMR) and trigger serious water lead contamination from galvanic lead solder: copper pipe corrosion. Previous attempts to control this problem through simple water chemistry modifications were unsuccessful, but in this work a combination of zinc …
-
Recreational spearfishing: an historical, ecological and sociological perspective
… sparse. The proposed Coral Sea Marine Reserve (CSMR) could create one of the world's largest and most remote marine parks, yet little information is available to inform discussions. The third data chapter in this thesis (Chapter 4) investigated the history of recreational spearfishing in the …