Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"CT Specimen"”.
-
Modelling Stress Relaxation in Bolt Loaded CT{Specimens
… C) are prone to creep deformation and hence affect the crack tip stresses. Various creep models are presented. One of the models are used to describe the bolt load relaxation of modified CT-specimens analytically. The model is compared to numerical results using Ansys. The long term bolt load …
-
Effect of Hydrogenon on Mechanical Behavior of a Zircaloy-4 Alloy
… In order to verify these phenomena, the effect of internal stresses on the zirconium-hydride-precipitate formation, and in turn, the influence of the hydrides on the subsequent intergranular strain evolution in a hexagonal-close-packed zircaloy-4 alloy were investigated, using neutron and …
-
Interfacial strength development in thermoplastic resins and fiber-reinforced thermoplastic composites
The objective of this study was to develop tests that could be used to characterize autohesive strength development in amorphous thermoplastic resins and fiber-reinforced thermoplastic prepregs. All tests were performed using polysulfone P1700 thermoplastic resin and AS4/P1700 graphite-polysulfone …
-
Nonlinear ultrasonic phased array imaging of partially-closed fatigue cracks
… technique that is not only used in the nondestructive evaluation (NDE) of defects in materials but also in the medical diagnostic, for instance, e.g. for a noninvasive examination of the heart. However, difficulties occur in NDE applications when it comes to monitoring some challenging …
-
Imaging Microvascular Changes Associated with Neurological Diseases
… of microvascular abnormality can be characterized using current neuroimaging technologies. When applied to mouse models of human disease, these technologies reveal cerebral vascular patterns and help uncover genotype-to-phenotype relationships. This thesis focuses on the development and …
-
Applications of phase-field modeling in hydraulic fracture
… applications in the oil industry, complicated fracture geometries and propagation behaviors are encountered. As a result, the development of modeling approaches that can capture the physics of non-planar crack evolution while being computationally tractable is a critical challenge. The phase-field …
-
The Study of Overload Effects on Fatigue-Crack-Growth Behavior by Neutron Diffraction
… rate (da/dN) versus stress-intensity-factor range (∆K) curve, the crack-growth rate decreased, following the overload, which indicates the crack-closure phenomenon. The crack-growth-retardation period was observed after the overload. The goal of this study is to investigate the …
-
The Study of Crack Closure Phenomenon Following One Tensile Overload
… rate (da/dN) versus stress-intensity-factor range (K) curve, the crack-growth rate decreased, following the overload, which indicated the crack-closure phenomenon. The crack-growth-retardation period was observed after the overload. The goal of this study is to investigate the …
-
Dual-Use Strain Sensors for Simultaneous Strain Measurement and Acoustic Source Location
… have long been studied in the field of Nondestructive Evaluation (NDE) as a part of structural health monitoring (SHM). Strain gauges use electrical resistance to monitor strains during the loading of a component. Ultrasonic transducers are piezo devices that use a crystal-like sensing element …
-
Testování lomové houževnatosti za vysokých teplot s využitím miniaturních CT těles
… Toto chování bylo testováno pomocí miniaturních CT těles, na kterých byly provedeny zkoušky za účelem změření křivek odolnosti proti šíření tvárné trhliny (J-R křivky), ze kterých byla určena hodnota lomové houževnatosti. Lomové vlastnosti byly dále hodnoceny pomocí faktografické analýzy lomových …
-
Vliv velikosti tělesa na R-křivku a na otupení čela trhliny
… v oblasti tvárného porušení oceli prostřednictvím R křivky, která charakterizuje odolnost materiálu proti šíření trhliny v závislosti na její délce. V práci byl zkoumán vliv teploty na R křivku v rozmezí teplot 23 až 600°C. Další cílem práce bylo studium vlivu velikosti tělesa pro tři …
-
Testování lomové houževnatosti za vysokých teplot s využitím miniaturních CT těles
… na měřené hodnoty při využití miniaturních CT těles. Pro účely experimentální práce byla z oceli P91 vyrobena zkušební tělesa standardní a čtvrtinové velikosti. J-R křivky byly měřeny v rozsahu teplot 23°C až 600°C. Na výsledcích nebyl prokázán vliv velikosti při pokojové teplotě. Provedené …
-
Návrh a realizace zařízení pro cyklické zatěžování zkušebního tělesa ve vakuové komoře
Diplomová práce se zabývá návrhem zařízení pro cyklické zatěžování standardizovaného tělesa uvnitř vakuové komory elektronového mikroskopu. Jsou rozebrány možné zdroje síly vhodné do vakua a popsána metodika nepřímého měření zatížení. Dále je navržen hardware pro měření a řízení. Software je …