Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 53 for “"CTE mismatch"”.

  1. Study of near-surface stresses in silicon around through silicon vias at elevated temperatures by Raman spectroscopy and simulations

    … the 3-D integration. However, due to the large mismatch of the thermal expansion coefficients (CTEs) between via-filling material (Cu) and Si, thermal stresses induced during processing can result in undesirable mobility shifts in devices and serious reliability problems. In this work, the …

    ubc Repository record for Study of near-surface stresses in silicon around through silicon vias at elevated temperatures by Raman spectroscopy and simulations (opens in a new tab) Download PDF for Study of near-surface stresses in silicon around through silicon vias at elevated temperatures by Raman spectroscopy and simulations (opens in a new tab)

  2. Numerical analysis of TSV/micro-bump deformation due to chip misalignment and thermal processing in 3D IC packages

    … effects due to coefficient of thermal expansion (CTE) mismatch during processing are also studied to provide trends of stress and deformation fields. Reliability of the 3D chip stack, TSV and solder micro-bump are assessed by examining local stresses and the buildup of plastic strain through …

    unm Repository record for Numerical analysis of TSV/micro-bump deformation due to chip misalignment and thermal processing in 3D IC packages (opens in a new tab)

  3. Electrical Breakdown of Thermal Spray Alumina Ceramic Applied to AlSiC Baseplates Used in Power Module Packaging

    … spreader. A coefficient of thermal expansion (CTE) mismatch exists between copper and alumina and leads to reliability issues that arise due to product failure during thermal cycling and lifetime operation. The substitution of an AlSiC metal matrix composite (MMC) heat spreader baseplate …

    vt Repository record for Electrical Breakdown of Thermal Spray Alumina Ceramic Applied to AlSiC Baseplates Used in Power Module Packaging (opens in a new tab)

  4. Characterization of Non-linear Polymer Properties to Predict Process Induced Warpage and Residual Stress of Electronic Packages

    … warpage and coefficient of thermal expansion (CTE) mismatch induced warpage. The effective chemical shrinkage and the equilibrium modulus are needed for the curing induced warpage prediction. Considering various polymeric materials used in microelectronic packages, unique curing setups and …

    maryland Repository record for Characterization of Non-linear Polymer Properties to Predict Process Induced Warpage and Residual Stress of Electronic Packages (opens in a new tab)

  5. Mechanisms associated with rumpling of Pt-modified [beta]-NiAl coatings

    … martensitic phase transformation was then characterized using DSC and XRD. The martensitic start temperature on cooling, Ms, was consistently found to be significantly lower than previously reported values (e.g. 530°C vs. 100°C). Because of the low Ms temperature, the formation of the …

    iastate Repository record for Mechanisms associated with rumpling of Pt-modified [beta]-NiAl coatings (opens in a new tab)

  6. Material Coefficient of Thermal Expansion Investigation for Use in Additive Manufacturing Fused Deposition Modeling for Composite Tooling

    … a much higher coefficient of thermal expansion (CTE) than the composites that are being cured on them. This research investigates the addition of negative CTE fillers in polymers to reduce CTE to more closely match composites to reduce CTE mismatch and part distortion during elevated temperature …

    usm Repository record for Material Coefficient of Thermal Expansion Investigation for Use in Additive Manufacturing Fused Deposition Modeling for Composite Tooling (opens in a new tab)

  7. Development of Polymer Composite Based Enabling Technologies for Lab-on-a-Chip Devices

    … In fact, medical and chemical analyses are predicted to shift from room-sized laboratories to hand-held portable devices. This dissertation is divided into three technologies. First, a series of terpolymer systems were synthesized and characterized to fabricate crosslinked coatings for …

    usf Repository record for Development of Polymer Composite Based Enabling Technologies for Lab-on-a-Chip Devices (opens in a new tab)

  8. Magnetoelectrodeposition Of Copper-Graphene Composites: A New Method for Tailored Properties of Copper in Advanced Packaging

    … high coefficient of thermal expansion (CTE) of ~17 ppm/K compared to traditional semiconductor and substrate core materials: ~3 ppm/K for silicon (Si), ~4 ppm/K for silicon carbide (SiC), ~4.5 ppm/K for gallium nitride (GaN), and a tailorable ~3 - 9.5 ppm/K for glass. This CTE mismatch …

    gatech Repository record for Magnetoelectrodeposition Of Copper-Graphene Composites: A New Method for Tailored Properties of Copper in Advanced Packaging (opens in a new tab)

  9. Protective Ultra-High Temperature Coatings/ Ceramics (UHTCs) for Ceramic Matrix Composites in Extreme Environments

    … the composite material needs to be protected against oxidation caused by the extreme conditions. With the aim to increase the combustion performance using higher temperatures (up to 1850 °C), this thesis deals with the replacement of the current Environmental Barrier Coating (EBC) …

    poli-torino Repository record for Protective Ultra-High Temperature Coatings/ Ceramics (UHTCs) for Ceramic Matrix Composites in Extreme Environments (opens in a new tab)

  10. Cyclic and Isothermal Oxidation Resistance of ASPS Thermal Barrier Coating Systems

    … isothermal and cyclic oxidations tests were conducted at a peak temperature of 1080C. The TBC systems tested consisted of nickel-base superalloy substrate (CMSX-4 or IN738LC), platinum aluminide bond coat and 8YSZ top coat with either vertical cracks (VC) or columnar structure. Samples with …

    carleton Repository record for Cyclic and Isothermal Oxidation Resistance of ASPS Thermal Barrier Coating Systems (opens in a new tab)

  11. Sintering techniques for microstructure control in ceramics

    … This difference was attributed to the absence of CTE mismatch induced residual stresses in the ZrB2 – ZrC composites. A high temperature reaction between ZrB2 and TiC producing Zr1-xTixB2 – ZrC composites was discovered and found to enhance densification while reducing the average grain size to as …

    purdue-thes Repository record for Sintering techniques for microstructure control in ceramics (opens in a new tab)

  12. A regioselective route to negative coefficient of thermal expansion materials for tuning epoxy thermomechanics

    … to have large coefficients of thermal expansion (CTE), which differ from the CTE of the substrates they are often applied to. A large CTE mismatch results in localized stress and sometimes cracking of the substrate, precluding utility of such thermosets/composites in certain applications, such as …

    texas Repository record for A regioselective route to negative coefficient of thermal expansion materials for tuning epoxy thermomechanics (opens in a new tab)

  13. Comparison of Doped and High-Resistivity Silicon Interposers for Heterogeneous Integration of Millimeter-Wave Circuits

    … to mitigate residual thermal stress from CTE mismatch. DC measurements confirm a TSV series resistance on the order of 1 Ω. Small-signal millimeter-wave on-wafer measurements show the coplanar interconnects fabricated on HR Si have an insertion loss of 0.6 dB/mm at 40 GHz, representing …

    cornell Repository record for Comparison of Doped and High-Resistivity Silicon Interposers for Heterogeneous Integration of Millimeter-Wave Circuits (opens in a new tab)

  14. Polylithic integration of heterogeneous multi-die enabled by compressible microinterconnects

    … non-uniformity on the attaching substrate and CTE mismatch induced warpage and provide non-permanent contact. To this end, novel compliant interconnects for emerging electronic devices and new heterogeneous multi-die integration platform enabled by the compliant interconnects are explored.

    gatech Repository record for Polylithic integration of heterogeneous multi-die enabled by compressible microinterconnects (opens in a new tab)

  15. DENSE 3D HETEROGENEOUS INTEGRATION USING SELECTIVE COBALT ALD DEPOSITION AND RECONSTITUTED TIERS

    … ICs stacking, is fabricated and carefully characterized. The testbed shows seamless Co interconnection between the Cu pads after Co ALD deposition for 1000 cycles. The electrical measurements demonstrate over 90% yield, which prove the Co connectivity between the Cu pads. Moreover, in this …

    gatech Repository record for DENSE 3D HETEROGENEOUS INTEGRATION USING SELECTIVE COBALT ALD DEPOSITION AND RECONSTITUTED TIERS (opens in a new tab)

  16. The characterisation and assessment of curvature in asymmetric carbon fibre composite laminates

    … curvature, including shrinkage during curing, CTE mismatch and geometry. Measured curvatures were compared to developed theoretical models under a series of interfacial conditions; taking into account the slippage between plies during laminate cure, unaccounted for in previous work. The causes …

    birmingham Download PDF for The characterisation and assessment of curvature in asymmetric carbon fibre composite laminates (opens in a new tab)

  17. Cure Dependent Viscoelastic-Plastic Modeling of Adhesives to Capture CTE Effects in Multi-Material Structures

    The effects of Coefficient of Thermal Expansion (CTE) mismatch in multi-material adhesive joints, induced during the manufacturing process, are expected to hinder the peak performance of the adhesive in the service life of the vehicle. With a goal to study and capture these effects, several …

    clemson Repository record for Cure Dependent Viscoelastic-Plastic Modeling of Adhesives to Capture CTE Effects in Multi-Material Structures (opens in a new tab)

  18. Microstructural Evolution in Thermally Cycled Large-Area Lead and Lead-Free Solder Joints

    … due to thermal fatigue as a result of CTE mismatch within the system. By understanding the failure mechanisms related to lead-free solders, the application of lead- free solders could be more strategically designed for specific applications. The objective of this thesis is to observe …

    vt Repository record for Microstructural Evolution in Thermally Cycled Large-Area Lead and Lead-Free Solder Joints (opens in a new tab)

  19. A THERMOMECHANICAL FATIGUE LIFE PREDICTION METHODOLOGY FOR BALL GRID ARRAY COMPONENTS WITH REWORKABLE UNDERFILL

    … to the large coefficient of thermal expansion (CTE) mismatch between the silicon die and substrate. More recently, underfill materials, specifically reworkable underfills, have been used to improve reliability of second level interconnects in ball grid array (BGA) packages in harsh end-use …

    maryland Repository record for A THERMOMECHANICAL FATIGUE LIFE PREDICTION METHODOLOGY FOR BALL GRID ARRAY COMPONENTS WITH REWORKABLE UNDERFILL (opens in a new tab)

  20. Failure Mechanism Analysis and Life Prediction Based on Atmospheric Plasma-Sprayed and Electron Beam-Physical Vapor Deposition Thermal Barrier Coatings

    … failure analysis and life prediction were conducted for Atmospheric Plasma Sprayed Thermal Barrier Coatings (APS-TBCs) and electron beam physical vapor deposition thermal barrier coatings (EB-PVD TBCs) with Pt-modified -NiAl bond coats deposited on Ni-base single crystal superalloys. For …

    ottawa-retro Repository record for Failure Mechanism Analysis and Life Prediction Based on Atmospheric Plasma-Sprayed and Electron Beam-Physical Vapor Deposition Thermal Barrier Coatings (opens in a new tab)

Page 1 of 3