Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"CZTSe"”.
-
Fabrication of Cu<sub>2</sub>ZnSnSe<sub>4</sub> Thin-film Solar Cells by a Two-stage Process
Copper zinc tin selenide (Cu2ZnSnSe4 or CZTSe) is a quaternary compound semiconductor material that has attained more and more attention for thin film photovoltaic applications. CZTSe is only comprised of abundant and non-toxic elements. People have concerns about availability and cost of indium …
-
Elektrocheminis Cu-Zn-Sn pirmtako nusodinimas ir Cu2ZnSnSe4 saulės elemento formavimas /
In this study Cu2ZnSnSe4 (CZTSe) solar cells have been formed by selenizing electrochemically deposited Cu-Zn-Sn (CZT) precursor. Two approaches have been presented for forming CZT precursor: a) co-deposition of Cu-Zn-Sn and stacked Cu, Sn, Zn layer deposition using flow cell. Deposition parameters …
-
Electrochemical deposition of Cu-Zn-Sn precursor and formation of Cu2ZnSnSe4 solar cell /
In this study Cu2ZnSnSe4 (CZTSe) solar cells have been formed by selenizing electrochemically deposited Cu-Zn-Sn (CZT) precursor. Two approaches have been presented for forming CZT precursor: a) co-deposition of Cu-Zn-Sn and stacked Cu, Sn, Zn layer deposition using flow cell. Deposition parameters …
-
Photoluminescence study of Cu(In,Ga)Se2 and Cu2ZnSnSe4 used for thin film solar cells
… irradiation on optical properties of Cu2ZnSnSe4 (CZTSe) thin films. Photoluminescence (PL) measurements were performed on samples of CIGSe single crystals with x=0, 0.05, 0.10, 0.25, 0.50, 0.75, 1 and on samples of CZTSe thin films before and after Ar+ irradiation.;The impact of variations in …
-
Structural trends in off-stoichiometric kesterite type compound Cu2ZnSnSe4 semiconductor
… and characterization of off-stoichiometric CZTSe. In order to perform experimental analysis of defect types and concentrations, polycrystalline powder samples have been synthesized by solid state reaction within different off- stoichiometric compositions suggested by [4, 5]. Chemical and …
-
Scanning probe microscopy study of thin film solar cells
… Se₂ (CIGS), Cu₂ZnSnS₄ (CZTS) and Cu₂ZnSnSe₄ (CZTSe), have been intensively studied for their unique features and excellent prospect of mass production in industry. The p-n junction is the most critical part of the thin film solar cell and greatly influences the performance. In this thesis …
-
Assessment of kesterite electronic and chemical surface properties
… and valence band (VB) when going from CZTS to CZTSe? A comprehensive study of the kesterite absorbers was done using surface-sensitive techniques such as X-ray Photoelectron Spectroscopy (XPS) and synchrotron-based spectroscopies, to investigate the chemical composition of kesterite surfaces. …
-
Elektrochemische Legierungsabscheidung zur Herstellung von Cu2ZnSnS4 Dünnschichtsolarzellen
… Eigenschaften von CZTS und Cu2ZnSnSe4 (CZTSe), als In und Ga freie und damit kostengünstige Alternativen, bereits ausführlich vorgestellt. Im Rahmen dieser Arbeit konnte anhand von kristallographischen Ergebnissen sowie durch Untersuchungen der Bandlückenenergien bestätigt werden, dass …
-
Synthesis and characterization of copper zinc tin sulfide nanoparticles and thin films.
… Raman spectra for both CZTS and Cu2ZnSnSe4 (CZTSe) using Gaussian peaks, we observed that the most intense Raman scattering peak in both CZTS and CZTSe is a sum of two different peaks which correspond to scattering from their respective kesterite and stannite phases. The electronic, …
-
Laser processes for monolithic interconnection formation in thin-film solar cells /
… was developed and investigated in CIGS and CZTSe thin-film solar cells. LLST measurements revealed the relationship between the P3 scribe conductivity and the used laser wavelength. Increasing the laser pulse repetition rate, increased heat accumulation in the cells, which was observed as …
-
Lazeriniai procesai monolitinių jungčių plonasluoksniuose saulės elementuose formavimui /
… was developed and investigated in CIGS and CZTSe thin-film solar cells. LLST measurements revealed the relationship between the P3 scribe conductivity and the used laser wavelength. Increasing the laser pulse repetition rate, increased heat accumulation in the cells, which was observed as …
-
Development of earth-abundant materials and low-cost processes for solar cells
… the loss of Sn associated with the conversion of CZTSe to CZTSSe during the grain growth process is mitigated, leading to an increase in the conversion efficiency compared to that of the precursor film without using ethyl cellulose. Such an improvement can provide insight into the grain growth of …
-
Electronic structure calculations of Thermoelectric Materials
… dynamics was performed on CTS, CZTS and CZTSe. The root mean squared displacement value for the disordered polymorph was higher than for the ordered phase, indicating increased static disorder. This corresponds to the static (temperature-independent) distortion of the crystalline lattice …
-
Modeling of High Power Conversion Efficiency Thin Film Solar Cells
… células solares de kesterita que utilizan CZTS, CZTSe y sus aleaciones CZTSSe pueden convertirse en el reemplazo óptimo a los absorbentes de calcopirita. Estos materiales presentan unas características ópticas y eléctricas sobresalientes y tienen un gap óptico directo con una banda prohibida que …
-
Synthesis, deposition, and microstructure development of thin films formed by sulfidation and selenization of copper zinc tin sulfide nanocrystals
… selenide (Cu<sub>2</sub>ZnSnSe<sub>4</sub>, or CZTSe), and copper zinc tin sulfoselenide alloys [Cu<sub>2</sub>ZnSn(S<sub>x</sub>Se<sub>1-x</sub>)<sub>4</sub>, or CZTSSe]. Laboratory power conversion efficiencies of CZTSSe-based solar cells have risen to almost 13% in less than three decades of …