Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 417 for “"Calibration and validation"”.
-
Calibration and validation of aquifer model.
… study is to develop a suitable method for the calibration and validation of mathematical models of large and complex aquifer systems. Since the calibration procedure depends on the nature of the model to be calibrated and since many kinds of models are used for groundwater, the question of …
-
Seawinds Radiometer Brightness Temperature Calibration And Validation
… NASA's QuikSCAT launched in June 1999 and on Japan's ADEOS-II satellite launched in December 2002. The purpose of SeaWinds is to provide global measurements of the ocean surface wind vector. On QuikSCAT, a ground data processing algorithm was developed, which allowed the instrument to …
-
Calibration and validation the Dynamic Photorefraction System (DPRS)
… this instrumentation is no longer supported and runs on an outdated platform (Windows 98). There is a need to develop a new photorefraction system that has the ability of the Power Refractor to accurately measure accommodation and its dynamic characteristics. The resolution of measures can be …
-
Calibration and Validation of Gyroscope Inclusive Youth Sojourn Models
… predict sedentary behavior (SB), light PA (LPA), and moderate-to-vigorous PA (MVPA). The existing models are accelerometer-based and rely on non-statistical segmentation. Improvements may be possible through the incorporation of gyroscope data and statistical change point detection. PURPOSE: To …
-
Calibration and Validation of Remotely Sensed Ground Cover Maps
Calibration and validation is essential in the development of remotely sensed fractional ground cover maps to ensure their reliability and provide users with confidence. Field measurements of fractional cover (FC) are typically collected through surveys where participants have the potential to …
-
Calibration and Validation of the IBSNAT/CERES Rice Model
… varieties were subjected to two nitrogen rates and three temperature regimes in the greenhouse and growth chambers to study the effects of temperature, variety and N fertilization on N uptake, development and growth of rice. Nitrogen fertilization had a significant effect on grain and straw …
-
Reflectance-based Calibration and Validation of the Landsat Satellite Archive
… was to consistently calibrate the entire Landsat series to a common reflectance scale by performing cross-calibration corrections from Landsat-8 OLI to Landsat- 1 MSS. A consistent radiance-based calibration was already performed from Landsat-8 OLI through Landsat-1 MSS using bright targets …
-
Prediction of Laser Ablation In Brain: Sensitivity, Calibration, and Validation
… laser induced thermal therapy (MRgLITT) stands to benefit from predictive computational modeling. The dearth of physical model parameter data leads to modeling uncertainty. This work implements a well-accepted framework with three key steps for model-building: model-parameter sensitivity …
-
Selection, calibration, and validation of coarse-grained models of atomistic systems
… fundamental questions in computational science and engineering concerning model selection, calibration, and validation processes that are used to construct predictive reduced order models through a unified Bayesian framework. This framework, enhanced with the concepts of information theory, …
-
Calibration and Validation of the RapidScat Scatterometer Using Natural Land Targets
RapidScat is a Ku-band scatterometer that was launched September 2014 and is currently operating on the International Space Station. It estimates ocean vector winds through accurate measurement of the normalized radar coefficient (σ0) of the ocean surface. In order to ensure the accuracy of σ0 …
-
Calibration and validation of inertial measurement unit for wave resolving drifters
… at five frequencies within the swell and wind-sea bands. Results from the tests show that the TSS-DL can accurately resolve the vertical simulated wave motions to within37% of the analytic signal amplitude and can resolve the horizontal simulated wave motions to within2133% of the …
-
Cross Calibration and Validation of Landsat 8 OLI and Sentinel 2A MSI
This work describes a proposed radiometric cross calibration between the Landsat 8 Operational Land Imager (OLI) and Sentinel 2A Multispectral Instrument (MSI) sensors. The cross calibration procedure involves i) correction of the MSI data to account for spectral band differences with the OLI; and …
-
Statistical methods for air quality model calibration and validation in urban areas
… this is because of the lack of monitoring sites and diffusion tubes in cities making it difficult to see spatially how air pollution is behaving. In this thesis, the Atmospheric Dispersion Modelling System (ADMS)-Urban is focussed on and it is of interest to see how well the modelled nitrogen …
-
Calibration and validation of high frequency radar for ocean surface current mapping
… backscatter instruments are being developed and tested in the marine science and defense science communities for their abilities to sense surface parameters remotely in the coastal ocean over large areas. In the Navy context, the systems provide real-time mapping of ocean surface currents and …
-
Rut Depth Prediction on Flexible Pavements - Calibration and Validation of Incremental-Recursive Models
… of pavement design has gone towards more and more analytically based methods. Future design will probably be based on incremental deterioration models. The objective is to evaluate different types of rut depth prediction models for an incremental design process. Two different models were …
-
Optimal Design of Validation Experiments for Calibration and Validation of Complex Numerical Models
As prediction of the performance and behavior of complex engineering systems shifts from a primarily empirical-based approach to the use of complex physics-based numerical models, the role of experimentation is evolving to calibrate, validate, and quantify uncertainty of the numerical models. …
-
Physical characterization, calibration, and validation methodology for modeling of grains using Discrete Element Method (DEM)
… particulate systems. Simulation of bulk grain handling in crop harvesting machine using the DEM technique have been challenging owing to the variability of corn conditions (e.g., grain moisture content) and limitation of robust DEM calibration procedures. Although DEM has provided an invaluable …
-
Calibration and validation of honey bee foraging flight duration as an estimate of distance flown
Organic beekeeping standards require that beekeepers provide for their honey bees (Apis mellifera, L.) with a radius of 6.4 km of foraging land that is free from (3 km) or with reduced use of (additional 3.4 km) synthetic pesticides. This requirement is based on the honey bee's large maximum …
-
Calibration and validation of traffic microsimulation models for safety evaluation using automated video-based conflict analysis
… facilities by analyzing vehicle trajectories and estimating conflict indicators. Using microsimulation in safety studies can have several advantages. However, concerns have been raised about the ability of these models to realistically represent unsafe vehicle interactions and near misses and …
-
Physics-Based Diesel Engine Model Development, Calibration and Validation for Accurate Cylinder Parameters and Nox Prediction
Stringent regulatory requirements and modern diesel engine technologies have engaged automotive manufacturers and researchers in accurately predicting and controlling diesel engine-out emissions. As a result, engine control systems have become more complex and opaquer, increasing the development …
Page 1 of 21