Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Calibration constants"”.

  1. Network-based control, monitoring and calibration of shipboard sensors

    The objective of this thesis is to develop a new calibration system for analog and smart digital pressure sensors, operable by only one person, and capable of calibrating local and remote sensors connected via RS232 cables, Bluetooth or an 802.11b wireless LAN. It is proposed that the operator uses …

    nps Repository record for Network-based control, monitoring and calibration of shipboard sensors (opens in a new tab)

  2. Wireless smart shipboard sensor network

    … prove that sensors can be made smart by keeping calibration constants and other relevant data such as network information stored on the sensor and a server computer. Study will focus on the design and implementation of an Ipsil IP(micro)8930 microcontroller, which is then connected, by the …

    nps Repository record for Wireless smart shipboard sensor network (opens in a new tab)

  3. Calibration of a leadglass lead-scintillator photon detector at Fermilab experiment E-704 (Lead-scintillator)

    … on the position of the incident particle. The calibration constants of the leadglass segments were obtained by an iterative method. The results of our analysis showed an energy resolution of $\sigma ({\rm E})\over {\rm E}$ = 24%/$\surd$E. A monitoring system using LED and $\sp{241}$Am sources …

    rice Repository record for Calibration of a leadglass lead-scintillator photon detector at Fermilab experiment E-704 (Lead-scintillator) (opens in a new tab)

  4. Spectral calibration of a Thomson scattering system

    <p>The procedure for the spectral calibration of the Advanced Toroidal Facility (ATP) spatial multipoint Thomson scattering electron density and temperatiffe diagnostic has been modified in order to make the calibration less time consuming. The scattering system incorporates a light collection …

    ut-knoxville Repository record for Spectral calibration of a Thomson scattering system (opens in a new tab)

  5. An evaluation of the three-dimensional split-film anemometer for measurement of atmospheric turbulence

    … in the measurement of atmospheric turbulence. Calibration constants were obtained and the suggested method of data analysis was evaluated. Changes were made in the second approximation to the T.S.I.-suggested method. A method based on the computation of the sensor yaw angles, θ,from the sensor …

    vt Repository record for An evaluation of the three-dimensional split-film anemometer for measurement of atmospheric turbulence (opens in a new tab)

  6. Study of inner region of the Orion nebula using the Hubble Space Telescope

    … contribution was removed from the (NII) images. Calibration constants were found to differ from predicted prelaunch values, and possible explanations were investigated. VLA and HST images of two compact sources near the center of the Orion Nebula were compared. The VLA and HST images are similar …

    rice Repository record for Study of inner region of the Orion nebula using the Hubble Space Telescope (opens in a new tab)

  7. Evaluation and modeling of repeated load test data of asphalt concrete for mechanistic-empirical flexible pavement design

    … the model are largely based on the adjustment of calibration constants not the DM. Various DM values would be capable of producing similar rutting profiles based on the current model. This study evaluated using accumulated strain data obtained from the Repeated Load Test (RLT) as an alternative to …

    rowan Repository record for Evaluation and modeling of repeated load test data of asphalt concrete for mechanistic-empirical flexible pavement design (opens in a new tab)

  8. Calibration of EDMI and recommendations for a base line network in Virginia

    … should be calibrated for all three errors. The calibration constants of EDMI may be monitored on an arbitrary base line; however, a calibrated base line is required to perform an accurate EDMI calibration for constant offset and scale errors. Calibration of cyclic error requires monumentation …

    vt Repository record for Calibration of EDMI and recommendations for a base line network in Virginia (opens in a new tab)

  9. Low-Cost Two-Color Pyrometry for Laser-Powder Bed Fusion

    … temporal alignment is achieved through a custom calibration routine using a 9×11 circular grid pattern, enabling precise perspective correction between the two camera images. Temperature mapping is performed using a ratio-of-radiance approach based on Wien’s approximation, with calibration …

    ut-knoxville Repository record for Low-Cost Two-Color Pyrometry for Laser-Powder Bed Fusion (opens in a new tab)

  10. A comparison of some methods of estimating radium

    … of measuring the ionization of current and the calibration of the electroscopes for quantitative work must be given careful study, because the results ultimately depend upon the calibration constants of the electroscopes used. In the estimation of radium, the electroscope corresponds to the …

    missouri Repository record for A comparison of some methods of estimating radium (opens in a new tab)

  11. IMPACTS OF RIVER MIGRATION ON BEACH ELEVATION GROWTH

    … with root-mean-square errors of 25 cm, but that calibration constants must be periodically adjusted. Better quantifying beach recovery to breaching events is essential to ensure success for ship-to-shore operations.

    nps Repository record for IMPACTS OF RIVER MIGRATION ON BEACH ELEVATION GROWTH (opens in a new tab)

  12. Computer colour matching with fluorescent dyes : The influence of fluorescence on reflectance - concentration relationships for fluorescent dyes, singly and in mixtures, and the effects on the prediction of recipes for use in colour matching.

    … all measurements. In addition to the normal K/S constants for non-fluorescent dyes and the non-fluorescent portion of the fluorescent dye'.. constants responsible for the fluorescent portion were necessary. Two sets of equations to relate the total radiance factors of dyeings with a fluorescent …

    bradford Repository record for Computer colour matching with fluorescent dyes : The influence of fluorescence on reflectance - concentration relationships for fluorescent dyes, singly and in mixtures, and the effects on the prediction of recipes for use in colour matching. (opens in a new tab)

  13. A Study on the Calibration and Accuracy of the One-Step TDR Method

    … and correlates them through two soil-specific constants, f and g. The two measurements, together with other soil specific constants, are then used to back calculate the water content and density in a single step. However, questions remain regarding the accuracy and bias of TDR measurements in …

    usf Repository record for A Study on the Calibration and Accuracy of the One-Step TDR Method (opens in a new tab)

  14. The development of poly(vinylidene fluoride) piezoelectric sensors for measuring peel stresses in adhesive joints

    … These measured sensitivities comprised the calibration constants of the film. In order to reduce the detrimental effect on bond strength caused by embedding the low surface energy film into adhesive bondlines, surface treatment methods were investigated using contact angle studies, XPS …

    vt Repository record for The development of poly(vinylidene fluoride) piezoelectric sensors for measuring peel stresses in adhesive joints (opens in a new tab)

  15. Investigation of the Validity of the ASTM Standard for Computation of International Friction Index

    … ASTM standard procedure, two equipment specific calibration constants (A and B) are assigned for each CFME during calibration. Then, in subsequent testing those calibrations constants can be used to adjust the equipment measurements to reliable IFI values. Just as much as A and B are presumed to …

    usf Repository record for Investigation of the Validity of the ASTM Standard for Computation of International Friction Index (opens in a new tab)

  16. An investigation into the effects of ducted tips on a marine propeller tested in an aerodynamic facility

    … applied load, respectively. Static and dynamic calibrations indicated that the linearity of the sensors is of a R² value of 1.000 or higher, except for that of the dynamic torque, which had a R value of 0.998. The calibration constants were accurate to the error of the setup: ±1.5%. Two 24"x24" …

    ubc Repository record for An investigation into the effects of ducted tips on a marine propeller tested in an aerodynamic facility (opens in a new tab) Download PDF for An investigation into the effects of ducted tips on a marine propeller tested in an aerodynamic facility (opens in a new tab)

  17. Development, Validation, Uptake Rate Modeling and Field Applications of a New Permeation Passive Sampler

    … kinetics modeling and the dependence of the calibration constants on temperature, humidity, linear flow velocity of air across the sampler surface, sampler geometry, sampling duration, and analyte concentrations are discussed. The permeability of polydimethylsiloxane toward various analytes, …

    waterloo Repository record for Development, Validation, Uptake Rate Modeling and Field Applications of a New Permeation Passive Sampler (opens in a new tab)

  18. Sensitivity analysis and calibration of the alligator cracking model in the mechanistic-empirical pavement design guide using regional data

    … and structural data along with local and global calibration factors to calculate the number of axles to failure and the damage index. Both of which are further used to calculate the fatigue cracking in the pavement with the help of regression coefficients and calibration constants. However, as …

    rowan Repository record for Sensitivity analysis and calibration of the alligator cracking model in the mechanistic-empirical pavement design guide using regional data (opens in a new tab)

  19. Studies of the Higgs boson Properties in $\sqrt{s} = 13$ TeV $pp$ Collisions

    … on the reconstruction, identification, and calibration of particles in the detector. New techniques were introduced for the muon momentum calibration and improved precision Run 2 calibration constants were derived to reduce the leading systematic uncertainty in the \htollll mass measurement. …

    toronto-retro Repository record for Studies of the Higgs boson Properties in $\sqrt{s} = 13$ TeV $pp$ Collisions (opens in a new tab)

  20. Desenvolvimento e calibração de fotômetro solar para medições da profundidade óptica por aerossóis e coluna de água precipitável

    … low cost and quality of the data collected. The calibration process utilized the Langley method (ML) and Modified Langley Method (MLM). These methods are usually applied at high altitudes in order to provide atmosp heric optical stability. This condition however can be found in low height sites …

    brazil-ufrn Repository record for Desenvolvimento e calibração de fotômetro solar para medições da profundidade óptica por aerossóis e coluna de água precipitável (opens in a new tab)

Page 1 of 2