Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"Capacitive Detection"”.

  1. Packaging and Characterization of MEMS Optical Microphones

    … be attributed to the challenges associated with capacitive detection at small size scales. Optical detection methods are able to overcome some of these challenges although miniaturized integration of these optical systems has not yet been demonstrated. An optical interferometric detection scheme …

    gatech Repository record for Packaging and Characterization of MEMS Optical Microphones (opens in a new tab)

  2. CMOS-MEMS Resonant Gate Transistor-Based Devices

    … of the resonators shrinking, the sensitivity of capacitive detection is becoming a major problem due to decreased output signals. The Resonating Suspended Gate Field Effect Transistor (RSG-FET) is seen as a perfect solution to overcome this problem. It replaces conventional capacitive detection …

    waterloo Repository record for CMOS-MEMS Resonant Gate Transistor-Based Devices (opens in a new tab)

  3. Nanomechanical Resonators towards Single Spin Sensitivity

    … dissertation, a design for ultrasensitive force detection using capacitive sensing is developed. Thermomechanical noise and position detection sensitivity constraints are addressed. The fabrication of an ultra-thin, nanomechanical force sensing cantilever with an integrated sense electrode for …

    maryland Repository record for Nanomechanical Resonators towards Single Spin Sensitivity (opens in a new tab)

  4. Integrated front-end analog circuits for mems sensors in ultrasound imaging and optical grating based microphone

    … develop and design front-end analog circuits for Capacitive Micromachined Ultrasound Transducers (CMUTs) and optical grating MEMS microphone. This work is motivated by the fact that with micro-scaling, MEMS sense capacitance gets smaller in a CMUT array element for intravascular ultrasound …

    gatech Repository record for Integrated front-end analog circuits for mems sensors in ultrasound imaging and optical grating based microphone (opens in a new tab)

  5. FABRICATION AND CHARACTERIZATION OF A MEMS MAGNETOMETER FOR MEASURING TORQUE OF A MAGNETIC CRYSTAL

    … such as ones incorporating piezoresistive or capacitive detection that have been fabricated and tested by earlier research groups. This type of magnetic information is useful in the study of superconductivity, for example. The microtorque magnetometer designed and fabricated in this thesis has …

    mcmaster Repository record for FABRICATION AND CHARACTERIZATION OF A MEMS MAGNETOMETER FOR MEASURING TORQUE OF A MAGNETIC CRYSTAL (opens in a new tab)

  6. Integration and characterization of micromachined optical microphones

    … integration of a micro-optical displacement detection architecture with a biomimetic MEMS microphone membrane based on the directional hearing mechanism of the parasitic fly Ormia Ochracea. The micromachined microphones feature optical interferometric displacement detection achieved using a …

    gatech Repository record for Integration and characterization of micromachined optical microphones (opens in a new tab)

  7. CMOS systems and circuits for sub-degree per hour MEMS gyroscopes

    … TIA is proposed as the front-end for resonant capacitive detection. The T-TIA provides on-chip transimpedance gains of 25MΩ, has a measured capacitive resolution of 0.02aF /√Hz at 15kHz, a dynamic range of 104dB in a bandwidth of 10Hz and consumes 400μW of power. A second contribution is the …

    gatech Repository record for CMOS systems and circuits for sub-degree per hour MEMS gyroscopes (opens in a new tab)

  8. Integrated interface electronics for capacitive MEMS inertial sensors

    … for the realization of interface electronics for capacitive MEMS (micro-electro-mechanical system) inertial sensors, i.e. accelerometers and gyroscopes. The research focuses on circuit techniques for capacitive detection and actuation and on high-voltage and clock generation within the sensor …

    aalto Repository record for Integrated interface electronics for capacitive MEMS inertial sensors (opens in a new tab)

  9. The Resonant Body Transistor

    … s exp(-1) . These resonators were measured by capacitively driving and sensing acoustic vibrations in the device. However, capacitive detection often requires 3-port scalar mixer measurement, complicating monolithic integration of the resonators with CMOS circuits. The internal dielectric …

    cornell Repository record for The Resonant Body Transistor (opens in a new tab)

  10. Photon-assisted spectroscopy of electronic interface states in perovskite oxide heterostructures

    … under additional optical excitation, the capacitive detection of the photoinduced displacement current in a parallel-plate capacitor geometry under modulated optical excitation, and the classical Kelvin probe technique. The methods are evaluated comparatively with respect to their …

    qucosa-diss

  11. Design of an Integrated Electrostatic Atomic Force Microscope

    … the probe vibrations and Z-axis motions. Optical detection and piezoelectric actuation contribute significantly to the price and complexity of traditional AFM systems. In this research effort, we use electrostatic actuation and capacitive motion detection of off-shelf AFM probes via electrodes …

    waterloo Repository record for Design of an Integrated Electrostatic Atomic Force Microscope (opens in a new tab)

  12. Mikromechanisches kraftgekoppeltes Sensor-Aktuator-System für die resonante Detektion niederfrequenter Schwingungen

    Die vorliegende Arbeit beschreibt die Entwicklung und Charakterisierung eines mikromechanischen kraftgekoppelten Schwingsystems für die resonante Detektion niederfrequenter Schwingungen. Es wird ein neuartiges Prinzip vorgestellt, das es ermöglicht, niederfrequente Vibrationen frequenzselektiv zu …

    qucosa-diss

  13. Inductive-Capacitive Resonant Circuit Sensors for Structural Health and Environmental Monitoring

    Inductive-capacitive (LC) resonant circuit sensors are low-cost, wireless, durable, simple to fabricate and battery-less. Consequently, they are well suited to sensing applications in harsh environments or in situations where large numbers of sensors are needed. They are also advantageous in …

    mtu Repository record for Inductive-Capacitive Resonant Circuit Sensors for Structural Health and Environmental Monitoring (opens in a new tab)