Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"Capacitor Charging"”.

  1. Efficiency Improvement Techniques For High Voltage Capacitor Charging Methods

    … a DC-to-DC converter for use in high-voltage capacitor charging applications. The primary objectives include increasing the efficiency and reducing the cost of traditional methods used for this application. Traditional methods were not designed specifically for high-voltage capacitor charging …

    ucf Repository record for Efficiency Improvement Techniques For High Voltage Capacitor Charging Methods (opens in a new tab)

  2. Design of a 30 kV power supply for rapid capacitor charging

    … compact power supply designed to charge a 6.6 pF capacitor to 30 kV in 40 ms from a thermal battery. The thermal battery has an output of 500 Vdc which is stepped up to 30 kV DC through the use of a micro-controlled H-Bridge and a custom built step-up transformer. The H-Bridge is used to convert …

    ttu Repository record for Design of a 30 kV power supply for rapid capacitor charging (opens in a new tab)

  3. Design, analysis and construction of a high voltage capacitor charging supply

    … One popular source of power is high voltage capacitor banks. The NPS Railgun Lab employs a fully functioning railgun with capacitor banks as power supplies. A reliable and safe charging supply for these capacitor banks is desirable and investigated in this paper. Construction and testing of a …

    nps Repository record for Design, analysis and construction of a high voltage capacitor charging supply (opens in a new tab)

  4. A High Power Density Three-level Parallel Resonant Converter for Capacitor Charging

    … three-level parallel resonant converter for capacitor charging. DC-DC pulsed power converters are widely used in military and medical systems, where the power density requirement is often stringent. The primary means for reducing the power converter size has been to reduce loss for reduced …

    vt Repository record for A High Power Density Three-level Parallel Resonant Converter for Capacitor Charging (opens in a new tab)

  5. Investigation of ultra-high switching frequency to reduce size in rapid capacitor charging

    This project concerned itself with two different chargers, both based on the same principle designs but both having fundamentally different output and input requirements and goals. Both chargers were built using a full bridge setup that was MOSFET based utilizing frequencies of 187 kHz to 1 MHz …

    ttu Repository record for Investigation of ultra-high switching frequency to reduce size in rapid capacitor charging (opens in a new tab)

  6. Fabrication and modelling of an all-printed PEDOT:PSS supercapacitor on a commercial paper

    Supercapacitors demonstrate substantial improvement in charge storage capability compared to the conventional capacitors. With the emergence of printed electron- ics such as RFID tags, smart cards, electronic paper, and wearable electronics, printed energy storage devices are desirable. Therefore, …

    ubc Repository record for Fabrication and modelling of an all-printed PEDOT:PSS supercapacitor on a commercial paper (opens in a new tab) Download PDF for Fabrication and modelling of an all-printed PEDOT:PSS supercapacitor on a commercial paper (opens in a new tab)

  7. Development of an Electromagnetic Energy Harvester for Monitoring Wind Turbine Blades

    … the model with a load resistor circuit, and a capacitor charging test to examine the model with an energy storage circuit. The validated model is then examined under varying tube lengths and positions, varying coil sizes and positions, and variations in other parameters. Finally a sample …

    vt Repository record for Development of an Electromagnetic Energy Harvester for Monitoring Wind Turbine Blades (opens in a new tab)

  8. Power conditioning for high voltage pulse applications

    … inductive energy storage systems, and a rapid capacitor charger for compact marx-generators are discussed. The first section about the exploding wire-fuse opening switch presents basic fuse sizing rules for various fuse materials as well as for a variety of primary energy sources. The basic …

    ttu Repository record for Power conditioning for high voltage pulse applications (opens in a new tab)

  9. Analysis and Control of VSC Based HVDC System under Single-Line-to-Ground Fault Conditions

    … <p>Third, the small signal model of the capacitor charging loop in a MMC inverter is first derived according to the internal dynamics of the MMC inverter. Based on this model, a novel startup strategy incorporating an averaging capacitor voltage loop and a feedforward control is proposed …

    utk-theses Repository record for Analysis and Control of VSC Based HVDC System under Single-Line-to-Ground Fault Conditions (opens in a new tab)

  10. Modeling and Characterization of Ultrasonic Wireless Power Transfer Through Solids

    … stable energy transmission, including successful capacitor charging and sensor activation, validating the system’s practicality in thermally sensitive and high-impedance environments. Overall, this research establishes a robust modeling framework for UWPT systems and explores their application in …

    auckland-ms Repository record for Modeling and Characterization of Ultrasonic Wireless Power Transfer Through Solids (opens in a new tab)

  11. Investigations of a discharge-excited short-pulse xenon monochloride laser

    … in the range from 350 kPa to 450 kPa, and a capacitor charging voltage of 15 kV. Discharge voltage waveforms were measured by using a fast-response Pockels cell. The time resolution for these measurements was better than 1 ns. Discharge current waveforms were measured using a fast-response …

    mcmaster Repository record for Investigations of a discharge-excited short-pulse xenon monochloride laser (opens in a new tab)

  12. Computational modelling of particle tribocharging in small, high-speed cyclones

    … through collisions, in a process known as tribocharging, which can cause smaller particles to agglomerate into larger structures. This thesis aims to develop a computationally inexpensive particle model able to predict the transport of particle charge which is valid in this highly-swirling flow …

    soton Download PDF for Computational modelling of particle tribocharging in small, high-speed cyclones (opens in a new tab)

  13. The investigation of energy harvesting from electrospun fibres

    … energy can reduce the need for constant device recharging. In this respect, piezoelectric polymers have great potential for use in wearable technology devices and have many advantages compared to traditional ceramic piezoelectric materials. However, the energy harvesting performance of …

    soton Download PDF for The investigation of energy harvesting from electrospun fibres (opens in a new tab)