Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 293 for “"Capacity retention"”.
-
Influence of Conducting Carbons on the Capacity Retention of NiO//LiCoO2 and Graphite//LiCoO2 Full Cell Lithium Ion Batteries
… of conductivity on Lithium-ion battery half cell capacity retention was investigated with graphite and NiO anodes, and a LiCoO2 cathode, which were fabricated with different amounts of conductive carbon addition. Half cells with more conductive carbon highly improved performance in terms of both …
-
Optimising P-type Na0.67Mn0.9Mg0.1O2 cathodes via synthesis method, doping, and phase composition
… produce single phase P3-NMMO, and its initial capacity was 95 mAh g-1, compared to 142 mAh g-1 for the biotemplated P3 phase. Biotemplating produced sharply faceted plates of P2-NMMO, with a higher initial capacity than the P2 synthesised via solid state methods, which has rounded plates. The …
-
Nanowire based materials and architectures as anodes for LI-ION batteries.
… limiting its widespread implementation is with capacity, durability and safety. A dramatic advancement is needed in terms of materials used for both electrodes and electrolytes. Several materials such as tin, tin oxide (SnO2), cobalt oxide (CoO3), iron oxide (Fe2O3), intermetallic alloys and …
-
Flexible Membrane Electrodes for Use in High-Capacity Lithium-Ion Batteries
Wearable electronic devices require high-capacity flexible batteries to improve user comfort and increase usage time per charge. In this thesis, flexible lithium-ion battery (LIB) electrodes are prepared using a novel and scalable phase inversion method, embedding one-dimensional SnO₂ nanowires and …
-
Toward the commercialisation of LiNi0.5Mn1.5O4 for a diversified battery supply chain : revealing key properties for enhanced performance
… commercialisation of LNMO is limited by its poor capacity retention. Subsequent chapters focused on improving LNMO’s capacity retention through cationic substitution, where Fe and Mg were chosen as earth-abundant substituents. Structural investigations revealed that Fe and Mg substitution led to …
-
Deciphering the degradation mechanisms of layered oxide cathodes for sodium-ion batteries
… of the sodium-ion intrinsically limits specific capacity, and the larger ionic size of sodium similarly introduces varied site occupation within the lattice and more detrimental structural deformations during cycling. While structural changes are more pronounced for sodium, the competing …
-
Gelatin/PEDOT: PSS Modified Manganese Dioxide Cathode in Aqueous Rechargeable Zinc-ion Batteries
… exhibits an excellent specific discharging capacity of 330 mAh/g at 50 mA/g when applied in the aqueous rechargeable Zn-MnO2 battery. However, the cyclability of the battery is not outstanding with only 20 cycles at 50 mA/g and 200 cycles at 500 mA/g at 80% capacity retention. To improve the …
-
Nanostructured Carbons and Additives for Improvement of the Lithium-Sulfur Battery Positive Electrode
… but often times it is short cycle life and poor capacity retention that is associated with the Li-S battery. In order to realize the full potential of the Li-S battery in society today, many obstacles must be overcome. In a typical Li-S cell with an organic liquid electrolyte sulfur is reduced by …
-
Correlating long-term lithium ion battery performance with solid electrolyte interphase (SEI) layer properties
… capacities. It also influences initial capacity loss, self-discharge, cycle life, rate capability and safety. Thus, SEI layer formation and electrochemical stability are primary topics in LIB development. This research involves experiments and discussions on key factors (graphite surface …
-
Brominated Carbon Materials As Positive Electrodes for Nonaqueous Secondary Lithium-Bromine Batteries
… facilitates improved coulombic efficiencies and capacity retention. Charging and discharging profiles at a 1C charge rate over 100 cycles at 3.8 V show that cells with brominated carbon positive electrodes exhibit a capacity retention two times greater than untreated electrodes. Likewise, …
-
Survey of Different Prussian Blue Analogues for Desalination Batteries
… for desalination is lackluster with 91.5% capacity retention after 100 cycles at a low rate of 1.8 C. To explore the implementation of the intercalative deionization method, we synthesized various novel Prussian blue analogues and tested their performance in seawater-like conditions. Along …
-
Investigation of Silicon-Based and Multicomponent Electrodes for High Energy Density Li-ion Batteries
… the use of nickel-rich cathodes as well as high-capacity anodes like silicon and lithium metal. While these materials enable a high energy density, this advantage is often counterbalanced with deficits such as poor stability and high cost. Multicomponent electrodes refer to strategies that try to …
-
Advanced Rechargeable Batteries With 3D Interconnected Carbon Nanotubes
… C and around 6,000 cycles at 0.68 C, with 70% capacity retention. More importantly, the system demonstrates over 1,000 cycles at 0.34 C with a high mass loading of 6 mg cm-2, directly addressing a significant gap in the literature where low C-rate cycling with high active material is often …
-
Advanced Rechargeable Batteries With 3D Interconnected Carbon Nanotubes
… C and around 6,000 cycles at 0.68 C, with 70% capacity retention. More importantly, the system demonstrates over 1,000 cycles at 0.34 C with a high mass loading of 6 mg cm-2, directly addressing a significant gap in the literature where low C-rate cycling with high active material is often …
-
Advanced Rechargeable Batteries With 3D Interconnected Carbon Nanotubes
… C and around 6,000 cycles at 0.68 C, with 70% capacity retention. More importantly, the system demonstrates over 1,000 cycles at 0.34 C with a high mass loading of 6 mg cm-2, directly addressing a significant gap in the literature where low C-rate cycling with high active material is often …
-
Advanced Rechargeable Batteries With 3D Interconnected Carbon Nanotubes
… C and around 6,000 cycles at 0.68 C, with 70% capacity retention. More importantly, the system demonstrates over 1,000 cycles at 0.34 C with a high mass loading of 6 mg cm-2, directly addressing a significant gap in the literature where low C-rate cycling with high active material is often …
-
Advanced Rechargeable Batteries With 3D Interconnected Carbon Nanotubes
… C and around 6,000 cycles at 0.68 C, with 70% capacity retention. More importantly, the system demonstrates over 1,000 cycles at 0.34 C with a high mass loading of 6 mg cm-2, directly addressing a significant gap in the literature where low C-rate cycling with high active material is often …
-
Advanced Rechargeable Batteries With 3D Interconnected Carbon Nanotubes
… C and around 6,000 cycles at 0.68 C, with 70% capacity retention. More importantly, the system demonstrates over 1,000 cycles at 0.34 C with a high mass loading of 6 mg cm-2, directly addressing a significant gap in the literature where low C-rate cycling with high active material is often …
-
Stable Rechargeable Aqueous Zinc Ion Battery Achieved by Cation Deficient Cathode Material and Gelatin Modified Separator
… zinc to manganese ratio has the highest initial capacity and also best rate performance. Then, gelatin modified separator was introduced into the battery system to prolong the battery cycle life. The capacity retention achieves 91.3% after 500 cycles at the current density of 300mA·g-1, which is …
-
A Study of Synthesis and Characterization of Naxmno2-δ as a Cathode Material for Sodium-Ion Battery
… V vs Na+/Na for C/10 where the initial discharge capacity 102 mA h/g-1 and 90% capacity retention after 20 cycles for NaxMnO2- δ. An ideal layered P2-type NaxMnO2-δ cathode calcined at 400°C has the highest specific discharge capacity of 130 mAh/g at 0.1C with capacity retention of approximately …
Page 1 of 15