Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 10 of 10 for “"Capacity-Based Design"”.

  1. Seismically Induced Column Buckling in Special Concentrically Braced Frames in Steel Buildings

    … in regions with high seismic hazard. Current design standards for SCBFs intend to ensure inelastic deformation capacity through strict ductile and capacity-based design requirements. Braces are intended to yield in tension and buckle in compression to dissipate seismic energy. The current …

    marquette Repository record for Seismically Induced Column Buckling in Special Concentrically Braced Frames in Steel Buildings (opens in a new tab)

  2. Multi-Panel CLT Shearwalls: Experimental Assessment, Analytical Development, and Design Considerations

    Analysis and design of Cross-Laminated Timber (CLT) walls under gravity loads have been outlined in the Canadian timber design standard with an adequate amount of details. The methods for designing shearwalls to resist lateral loads have not yet been fully developed, with only concepts being …

    ottawa-retro Repository record for Multi-Panel CLT Shearwalls: Experimental Assessment, Analytical Development, and Design Considerations (opens in a new tab)

  3. Capacity Resistance and Performance of Single-Shear Bolted and Nailed Connections: An Experimental Investigation

    … connections when loaded up to and beyond capacity (i.e., maximum resistance). Specimens included a wide array of connection configurations common in wood construction. All connections were tested monotonically in tension under displacement-controlled loading, parallel to the grain. Results …

    vt Repository record for Capacity Resistance and Performance of Single-Shear Bolted and Nailed Connections: An Experimental Investigation (opens in a new tab)

  4. Peak Connection Strength of Reduced Beam Section Moment Frame Connections

    In the design of reduced beam section (RBS) moment frame connections, the peak connection strength factor (𝐶𝑝𝑟) is used to estimate the expected maximum moment at the reduced section in the capacity-based design of moment-resisting frames. Current design provisions in AISC 358-22 define C𝑝𝑟 as the …

    byu Repository record for Peak Connection Strength of Reduced Beam Section Moment Frame Connections (opens in a new tab) Download PDF for Peak Connection Strength of Reduced Beam Section Moment Frame Connections (opens in a new tab)

  5. NUMERICAL AND EXPERIMENTAL STUDIES OF WOOD SHEATHED COLD-FORMED STEEL FRAMED SHEAR WALLS

    … future full-scale shear wall testing. Current design of wood sheathed CFS framed shear walls relies on deformations and associated ductility at the frame-to-sheathing connections (see e.g. AISI S213-12). Prescriptive requirements and capacity-based design principles are utilized to insure the …

    jhu Repository record for NUMERICAL AND EXPERIMENTAL STUDIES OF WOOD SHEATHED COLD-FORMED STEEL FRAMED SHEAR WALLS (opens in a new tab)

  6. Iterative decoding of multilevel and bit-interleaved coded modulation

    … Coding (MLC) invoking Multistage Decoding (MSD). Based on this 3-D EXIT chart, we design a precoded- MLC scheme employing both MSD and Parallel Independent Decoding (PID). In order to provide space diversity, we study the new arrangement of Bit-Interleaved Coded Modulation with Iterative Decoding …

    soton Download PDF for Iterative decoding of multilevel and bit-interleaved coded modulation (opens in a new tab)

  7. Information theoretic analysis design of antenna systems

    Historically, the design of antenna systems has evolved separately from Shannon theory. Shannon theory adopts a probabilistic approach in the design of communication systems, while antenna design approaches have relied on deterministic Maxwell theory only. This thesis introduces a new approach to …

    manitoba Repository record for Information theoretic analysis design of antenna systems (opens in a new tab)

  8. Behaviour of multi-storey cross-laminated timber buildings under lateral loading

    … already been completed. The lack of structural design codes and limited literature regarding the performance of CLT buildings under lateral loading are barriers to the adoption of CLT for buildings which could experience high lateral loading. Previous research into the behaviour of CLT buildings …

    qu-belfast Repository record for Behaviour of multi-storey cross-laminated timber buildings under lateral loading (opens in a new tab) Download PDF for Behaviour of multi-storey cross-laminated timber buildings under lateral loading (opens in a new tab)

  9. Seismic design and analysis of hybrid masonry with fuse connectors

    … regions where wind loads tend to control the design of the lateral force resisting elements. To establish a fundamental understanding of seismic behavior for hybrid masonry structural systems, simple analytical models are developed to predict the ultimate strength of hybrid masonry systems and …

    uiuc Repository record for Seismic design and analysis of hybrid masonry with fuse connectors (opens in a new tab)

  10. Enhancing Seismic Resiliency of Steel Buildings through Three-Dimensional Modeling of Diaphragm System Interaction with Braced Frame

    The design objectives of early seismic codes were mainly achieved by using acceptable construction materials, and minimum levels of strength and stiffness largely derived based on roughly estimated demands. Early seismic design provisions resulted in sometimes adequate levels of performance for …

    jhu Repository record for Enhancing Seismic Resiliency of Steel Buildings through Three-Dimensional Modeling of Diaphragm System Interaction with Braced Frame (opens in a new tab)