Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"Capillary Rheometer"”.

  1. INVESTIGATING RHEOLOGICAL TECHNIQUES TO MODEL AND PREDICT OPERATING CONDITIONS OF A SINGLE SCREW EXTRUDER WITH INTERNAL RESTRICTIONS

    … predicting extrusion conditions. Both off-line capillary rheometry and in-line extruder fed rheometry techniques have been used to model rheology of materials during extrusion. Investigations on use of an off-line capillary rheometer to model apparent viscosity of full fat soy flours revealed …

    purdue-thes Repository record for INVESTIGATING RHEOLOGICAL TECHNIQUES TO MODEL AND PREDICT OPERATING CONDITIONS OF A SINGLE SCREW EXTRUDER WITH INTERNAL RESTRICTIONS (opens in a new tab)

  2. Extrusion honing using mixtures of polyborosiloxanes and grit

    … using a concentric cylinder, a slit-die and a capillary rheometer. The shear history of the polyborosiloxane prior to testing with the capillary rheometer was found to significantly affect the results produced. At shear strain rates up to 100 s-1 and a temperature of 30°C the rheology of the …

    sheffield-hallam Download file for Extrusion honing using mixtures of polyborosiloxanes and grit (opens in a new tab)

  3. A Study of Polycarbonate / Poly (butylene terephthalate) Compounding in a Twin Screw Extruder

    … of PC/PBT blends was investigated by dynamic and capillary rheometers. The effects of processing conditions (screw speed, feed rate) on viscosity were measured and it was found that the Cox-Merz rule is not valid for PC/PBT blends. The change of morphology of PC/PBT blends was observed under a …

    waterloo Repository record for A Study of Polycarbonate / Poly (butylene terephthalate) Compounding in a Twin Screw Extruder (opens in a new tab)

  4. Capillary rheometry of soy isolate dough

    … (Promine-D) dough is determined using an Instron capillary rheometer at 298K, 333K and 363K. Thermal transitions of 10 to 100% soy isolate dough are measured using a Perkin-Elmer Differential Scanning Calorimeter (DSC-2) over 310 to 350K. The observed behavior of the soy isolate doughs is …

    vt Repository record for Capillary rheometry of soy isolate dough (opens in a new tab)

  5. On-line shear and extensional rheometry of polymer melts in the extrusion process.

    A novel on-line capillary rheometer (OLR) was used to examine the shear and extensional characteristics of polyolefin melts during twin screw extrusion (TSE). Comparisons with off-line rheometry were made using a twin-bore capillary rheometer and a modular in-line slit die rheometer (ILR) provided …

    bradford Repository record for On-line shear and extensional rheometry of polymer melts in the extrusion process. (opens in a new tab)

  6. On-line shear and extensional rheometry of polymer melts in the extrusion process.

    A novel on‑line capillary rheometer (OLR) was used to examine the shear and extensional characteristics of polyolefin melts during twin screw extrusion (TSE). Comparisons with off‑line rheometry were made using a twin‑bore capillary rheometer and a modular in‑line slit die rheometer (ILR) provided …

    bradford Repository record for On-line shear and extensional rheometry of polymer melts in the extrusion process. (opens in a new tab)

  7. The effect of molecular weight parameters on the die swell of polymer melts

    … in steady shear measurements on a cone and plate rheometer and a capillary rheometer and in dynamic experiments using the Maxwell orthogonal (eccentric rotating) deformation mode.</p><p>The die swell was measured by photographing the extrudate emerging from the capillary die (L/D = 44) through a …

    ut-knoxville Repository record for The effect of molecular weight parameters on the die swell of polymer melts (opens in a new tab)

  8. Study of Natural Fiber Breakage during Composite Processing

    … internal mixer, a twin-screw extruder (TSE) or a capillary rheometer; and b) a Monte Carlo computer simulation. Composites of thermomechanical fibers of aspen or wheat straw mixed with polypropylene were studied. Internal mixer experiments analyzed wheat straw and two batches of aspen fibers, …

    toronto-retro Repository record for Study of Natural Fiber Breakage during Composite Processing (opens in a new tab)

  9. Rheology of asbestos filled polystyrene

    <p>A capillary rheometer was used to generate data showing the volumetric flow rate at various pressures for a polystyrene resin and for an asbestos filled polystyrene. Variables evaluated were per cent asbestos and temperature. These data were then used to calculate the maximum shear stress at the …

    njit Repository record for Rheology of asbestos filled polystyrene (opens in a new tab)

  10. VISCOSITY MEASUREMENTS FOR INTERLAYER STRENGTH AND FAILURE IN ADDITIVELY MANUFACTURED PARTS

    … and viscosity, typically measured using a capillary rheometer. This research is focused on the viscosity of non-Newtonian heterogeneous polymer and powder mixtures used for direct-write AM using capillary rheometry and a custom measurement system for small-scale testing. This will help us …

    nps Repository record for VISCOSITY MEASUREMENTS FOR INTERLAYER STRENGTH AND FAILURE IN ADDITIVELY MANUFACTURED PARTS (opens in a new tab)

  11. Measurement of elongational rheology of polymer melts using semi-hyperbolically convergent dies

    … using semi-hyperbolically convergent dies and a capillary rheometer. The viscosity obtained using this technique is an apparent or effective elongational viscosity rather than true elongational viscosity, and it is related to the orientability or resistance to orientation development of polymer …

    utk-theses Repository record for Measurement of elongational rheology of polymer melts using semi-hyperbolically convergent dies (opens in a new tab)

  12. Flow behavior of molten polymer blends

    … molten polymer blends was made using the Instron Capillary Rheometer. The materials investigated were two phase blends of non-crystalline polymers (poIymethylmethacrystate-low Mw-polyvinylacetate, polyvinylacetate-polystyrene, polymethylmethacrylate-low Mw-polystyrene, polymethylmethacrylate-high …

    njit Repository record for Flow behavior of molten polymer blends (opens in a new tab)

  13. Melt hydroperoxidation polypropylene with potential application in pollution control

    … molecular weight reduction were studied using a capillary rheometer. Preliminary scrubbing experiments were carried out to study the reactivity of one hydroperoxidized polypropylene sample towards NO and further experiments are recommended to establish suitable testing protocol. It has been shown …

    njit Repository record for Melt hydroperoxidation polypropylene with potential application in pollution control (opens in a new tab)

  14. Understanding the Effects of Processing on the Properties of Perfluoroalkoxy (PFA)

    … under various processing conditions. A bespoke capillary rheometer was used to determine flow characteristics at various temperatures between 5-400s-1. The materials were found to be shear thinning, with the virgin grades exhibiting Newtonian behaviour at low shear rates. The viscosity of the …

    bradford Repository record for Understanding the Effects of Processing on the Properties of Perfluoroalkoxy (PFA) (opens in a new tab)

  15. Mold filling characteristics and molecular orientation in injection molding of liquid crystalline copolyesters of poly (ethylene terephthalate)

    … terephthalate) using Instron model 3211 capillary rheometer. Two copolyesters of PET modified with 60 and 80 mole percent parahydroxy benzoate were examined. Melt viscosities were measured as a function of temperature and wall shear rates. Mold filling characteristics were investigated by …

    vt Repository record for Mold filling characteristics and molecular orientation in injection molding of liquid crystalline copolyesters of poly (ethylene terephthalate) (opens in a new tab)

  16. The role of surface energy of boron nitride on gross melt fracture elimination of polymers

    … of surface energy of powders using the capillary rise technique based on Washburn's equation. It is measured by finding the contact angle from liquid penetration experiments with polar and non-polar liquids. Both the dispersive and non-dispersive components of surface energy are …

    ubc Repository record for The role of surface energy of boron nitride on gross melt fracture elimination of polymers (opens in a new tab) Download PDF for The role of surface energy of boron nitride on gross melt fracture elimination of polymers (opens in a new tab)

  17. The Effects of Processing Conditions on Thermoplastic Prototypes Reinforced with Thermotropic Liquid Crystalline Polymers

    … from long fiber TLCP reinforced strands using a capillary rheometer in order to study the effects of capillary diameter, capillary L/D, and apparent shear rate on the tensile properties.

    vt Repository record for The Effects of Processing Conditions on Thermoplastic Prototypes Reinforced with Thermotropic Liquid Crystalline Polymers (opens in a new tab)

  18. Preparation of Medical Composites for X-ray Shielding

    … by T. Glaskova et al. It was also found that capillary rheometer could be used to analyse high filler loaded composites dispersion rheology and determine K and n values in the power law for non-newtonian liquids. A strong correlation was seen between the image analysis and the rheology …

    chalmers Repository record for Preparation of Medical Composites for X-ray Shielding (opens in a new tab)

  19. Shear and effective elongational rheology and polymer molecular characteristics

    … at different temperatures using a rotational rheometer. Effective elongational viscosity of polyethylenes and polyisobutylene was also measured at different Hencky strains and temperatures using a capillary rheometer by replacing the capillary cylindrical die with a hyperbolic converging die. …

    utk-theses Repository record for Shear and effective elongational rheology and polymer molecular characteristics (opens in a new tab)

  20. Rheo-PTV analysis of complex fluids

    … This study presents a novel optical capillary rheometer that benefits from the advantages of both capillary rheometry and flow visualization. The experimental setup developed in this research was applied to three different case studies, each highlighting an aspect of the rheological …

    ubc Repository record for Rheo-PTV analysis of complex fluids (opens in a new tab) Download PDF for Rheo-PTV analysis of complex fluids (opens in a new tab)

Page 1 of 3